Probabilistic modeling of the indoor climates of residential buildings using EnergyPlus

Abstract

The indoor air temperature and relative humidity in residential buildings significantly affect material moisture durability, heating, ventilation, and air-conditioning system performance, and occupant comfort. Therefore, indoor climate data are generally required to define boundary conditions in numerical models that evaluate envelope durability and equipment performance. However, indoor climate data obtained from field studies are influenced by weather, occupant behavior, and internal loads and are generally unrepresentative of the residential building stock. Likewise, whole-building simulation models typically neglect stochastic variables and yield deterministic results that are applicable to only a single home in a specific climate. The purpose of this study was to probabilistically model homes with the simulation engine EnergyPlus to generate indoor climate data that are widely applicable to residential buildings. Monte Carlo methods were used to perform 840,000 simulations on the Oak Ridge National Laboratory supercomputer (Titan) that accounted for stochastic variation in internal loads, air tightness, home size, and thermostat set points. The Effective Moisture Penetration Depth model was used to consider the effects of moisture buffering. The effects of location and building type on indoor climate were analyzed by evaluating six building types and 14 locations across the United States. The average monthly net indoor moisture supply values were calculated for each climate zone, and the distributions of indoor air temperature and relative humidity conditions were compared with ASHRAE 160 and EN 15026 design conditions. The indoor climate data will be incorporated into an online database tool to aid the building community in designing effective heating, ventilation, and air-conditioning systems and moisture durable building envelopes.

Keywords

Indoor climate probabilistic modeling building simulation moisture buffering relative humidity

Get full access to this article

View all access options for this article.

References

ANSI/ASHRAE Standard 140-2011 (2011) Standard method of test for the evaluation of building energy analysis computer programs.

ANSI/ASHRAE Standard 160-2009 (2009) Criteria for moisture-control design analysis in buildings.

ASHRAE (2013) ASHRAE Handbook Fundamentals. Atlanta, GA: American Society of Heating, Refrigeration, and Air Conditioning Engineers.

ASTM E3054/E3054M-16 (2016) Characterization and use of hygrothermal models for moisture control design in building envelopes.

BEopt (2016) Golden, CO: National Renewable Energy Laboratory.

Brohus

Frier

Heiselberg

et al . (2012) Quantification of uncertainty in predicting building energy consumption: a stochastic approach. Energy and Buildings55: 127–140.

Crawley

Hand

Kummert

et al . (2008) Contrasting the capabilities of building energy performance simulation programs. Building and Environment43(4): 661–673.

De Dear

Brager

(1998) Developing an adaptive model of thermal comfort and preference. ASHRAE Transactions104: 145–167.

Deru

Field

Studer

et al . (2011) U.S. Department of Energy commercial reference building models of the national building stock. National Renewable Energy Laboratory. Available at: http://www.nrel.gov/docs/fy11osti/46861.pdf

10.

EN 15026:2007 (2007) Hygrothermal performance of building components and building elements—assessment of moisture transfer by numerical simulation.

11.

Hagentoft

C-E

(2001) Introduction to Building Physics. Lund: Studentlitteratur.

12.

Haghi

(2011) Heat and Mass Transfer in Textiles, 2nd ed. WSEAS Press. Available at: http://www.wseas.us/e-library/conferences/2011/Haghi/Haghi.pdf

13.

Henninger

Witte

(2015) EnergyPlus Testing with HVAC Equipment Performance Tests CE100 to CE200 from ANSI/ASHRAE Standard 140-2011. Arlington Heights, IL: GARD Analytics.

14.

Humphreys

(1976) Field studies of thermal comfort compared and applied. Building Services Engineer44(1): 5–23.

15.

International Code Council (2009) International Energy Conservation Code. Available at: https://law.resource.org/pub/us/code/ibr/icc.iecc.2009.pdf

16.

Kerestecioglu

Swami

Dabir

et al . (1988) Theoretical and Computational Investigation of Algorithms for Simultaneous Heat and Moisture Transport in Buildings: Task 2 Final Report. Cape Canaveral, FL: Florida Solar Energy Center.

17.

Künzel

(1995) Simultaneous Heat and Moisture Transport in Building Components: One- and Two-Dimensional Calculation Using Simple Parameters. Stuttgart: IRB Verlag. Available at: http://www.hoki.ibp.fraunhofer.de/ibp/publikationen/dissertationen/hk_dissertation_e.pdf

18.

Lawrence Berkeley National Laboratory (2012) Envelope Leakage: Residential Diagnostics Database. Berkeley, CA: Lawrence Berkeley National Laboratory.

19.

Metzger

Norton

(2014) The Building America Indoor Temperature and Humidity Measurement Protocol. Golden, CO: National Renewable Energy Laboratory.

20.

Oak Ridge Leadership Computing Facility (n.d.) Titan Cray XK7. Available at: https://www.olcf.ornl.gov/computing-resources/titan-cray-xk7/

21.

Pallin

Boudreaux

Perez

et al . (2016) Simulations of indoor moisture generation in U.S. homes. In: Proceedings of the symposium on advances in hygrothermal performance of building envelopes: materials, systems and simulations, Orlando, FL, 26–27 October 2016.

22.

Sherman

Grimsrud

(1980) Infiltration-pressurization correlation: simplified physical modeling. ASHRAE Transactions86(2): 778.

23.

Sulaiman

Olsina

(2014) Comfort reliability evaluation of building designs by stochastic hygrothermal simulation. Renewable and Sustainable Energy Reviews40: 171–184.

24.

Tian

De Wilde

(2011) Uncertainty and sensitivity analysis of building performance using probabilistic climate projections: a UK case study. Automation in Construction20: 1096–1109.

25.

U.S. Department of Energy (2016a) EnergyPlus Version 8.5 Documentation: Engineering Reference. Washington, DC: U.S. Department of Energy.

26.

U.S. Department of Energy (2016b) EnergyPlus Version 8.5 Documentation: Getting Started. Washington, DC: U.S. Department of Energy.

27.

U.S. Department of Energy (2016c) Weather Data: EnergyPlus. Available at: https://energyplus.net/weather (accessed 11 October 2016).

28.

U.S. Energy Information Administration (2009) Residential Energy Consumption Survey. Washington, DC: U.S. Energy Information Administration.

29.

U.S. Environmental Protection Agency (2001) Energy Star Home Sealing Specification. Washington, DC: U.S. Environmental Protection Agency.

30.

Wilson

Metzger

Horowitz

et al . (2014) Building America House Simulation Protocols. Golden, CO: National Renewable Energy Laboratory.

31.

Woods

Winkler

Christensen

(2013) Evaluation of the Effective Moisture Penetration Depth Model for Estimating Moisture Buffering in Buildings. Golden, CO: National Renewable Energy Laboratory.