One of the main functions of the exterior walls and façades is to protect the indoor and the sensitive parts of construction from the outdoor climate. Exposure of driving rain is the most prominent moisture source a wall has to resist. Despite this, there is a lack of information on rain resistance. Field measurements on real-life external walls show that recurrent water leakage under driving rain conditions is observed in five out of seven new-built houses in Sweden, including those with ventilated façades. About a 100 commercial laboratory façade tests, mounted by façade suppliers, and targeted laboratory experiments showed that it is almost impossible to achieve fully tight façade solutions, and keep them sealed. Nearly, all test walls with façade details leaked, almost regardless of façade type and sealing efforts. The results from field and laboratory measurements of rain resistance in new buildings in Sweden show that façades are usually not water-tight and also that very small deficiencies can cause substantial amount of water leakage.
ASHRAE Standard160-2016 (2016) Criteria for moisture-control design analysis in buildings.
2.
BeaulieuPBombergMCornickSet al. (2002) Final Report from Task 8 of MEWS Project (T8-03)—Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding Clad Wood-Frame Walls. Ottawa, ON, Canada: National Research Council Canada.
3.
BeijerOJohanssonA (1976) Driving rain against external walls of concrete. Fasadelement av betong, projektnummer 720444-2/C 1053:2. Stockholm: Swedish Cement and Concrete Research Institute, Royal Institute of Technology.
4.
BlockenBDeromeDCarmelietJ (2013) Rainwater runoff from building façades: A review. Building and Environment60: 339–361.
5.
Building-Industry-Authority (2003) Report on E2/AS1 Risk Matrix and Weather-tight Homes Resolution Service Data. Wellington, New Zealand: Ministry of Business, Innovation and Employment.
6.
Canada Mortgage and Housing Corporation (CMHC) (1996) Survey of Building Envelope Failures in the Coastal Climate of British Columbia. Ottawa, ON, Canada: CMHC.
7.
Canada Mortgage and Housing Corporation (CMHC) (2000) Wall Moisture Problems in Alberta Dwellings (Research highlight; technical series 2000-112). Ottawa, ON, Canada: CMHC.
8.
CarllC (2000) Rainwater intrusion in light-frame building walls. In: Proceedings of the 2nd annual conference on durability and disaster mitigation in wood-frame housing, 6–8 November, Madison, WI.
9.
EOTA(2013) External Thermal Insulation Composite (ETICS) with Rendering. Brussels: EOTA.
10.
HögbergA (2002) Microclimate load: transformed weather observations for use in design of durable buildings. Doctoral Thesis, Chalmers University of Technology, Göteborg.
11.
JanssonA (2014) Actions against moisture damage in ETIC walls. In: Proceedings of the 10th Nordic symposium on building physics, Lund, 15–19 June, pp. 960–966Lund University.
12.
KudderRJErdlyJL (1998) Water Leakage through Building Façades. West Conshohocken, PA: ASTM International.
13.
KünzelH (2015) Criteria defining rain protecting external rendering systems. In: Proceedings of the IBPC 6th international building physics conference, 14–17 June, Torino.
14.
LacasseM (2003) Recent studies on the control of rain penetration in exterior wood-frame walls. (NRCC-46889) National Research Council Canada.
15.
LacasseMAMiyauchiHHiemstraJ (2009) Water penetration of cladding components—results from laboratory tests on simulated sealed vertical and horizontal joints of wall cladding. Journal of ASTM International6: 1–29.
16.
LacasseMAO’connorTJNunesSet al. (2003) Report from task 6 of MEWS project—experimental assessment of water penetration and entry into wood-frame wall specimens—final report. Research report, vol. 133, 1February. Ottawa, ON, Canada: NRC Institute for Research in Construction, National Research Council Canada.
17.
LawtonM (1999) Vancouver’s rotting condominium problem—how did we get into this mess?Journal of Building Physics22: 356–363.
18.
OlssonL (2014a) Moisture conditions in exterior wooden walls and timber during production and use. Licentiate Thesis, Chalmers University of Technology, Göteborg.
19.
OlssonL (2014b) Results from laboratory measurements of wind driven tightness in different types of façades. In: Proceedings of the 10th Nordic symposium on building physics, Lund, 15–19 June, pp. 954–959. Lund University.
20.
OlssonL (2015) Long-term field measurements of moisture in wooden walls with different types of façades: focus on driving rain tightness. Energy Procedia78: 2518–2523.
21.
OlssonL (2016) Laboratory study of driving rain resistance of four façade systems with window fittings: experimental results of leakage flows. In: Proceedings of the CESB16-Central Europe toward sustainable building 2016, Prague, 22–24 June. Prague: Grada Publishing, Czech Technical University.
22.
SamuelsonIMjörnellKJanssonA (2008) Moisture damage in rendered, undrained, well insulated stud walls. In: Proceedings of the 8th symposium of building physics in the Nordic countries, Copenhagen, 16–18 June, pp. 1253–1260. Lund University.
23.
SandinK (1987) The Moisture Condition in Aerated Lightweight Concrete Walls—In situ Measurements of the Effect of the Driving Rain and the Surface Coating. Lund: Division of Building Materials, Lund Institute of Technology.
24.
SandinK (1993) Moisture conditions in cavity walls with wooden framework: measurements on a test building have been recorded and a number of significant conclusions are presented. Building Research and Information21: 235–238.
25.
ScottDL (1984) Rain Leakage in Wood Frame Walls: Two Case Histories. Ottawa, ON, Canada: National Research Council of Canada.
26.
SMHI (2016) Data (Online). Norrköping: Swedish Meteorological and Hydrological Institute. Available: https://www.smhi.se/klimatdata (accessed 29 March 2016).
27.
SS-EN 12865:2001 (2001) Hygrothermal performance of building components and building elements—determination of the resistance of external wall systems to driving rain under pulsating air pressure (The European Standard EN 12865:2001 has the status of a Swedish Standard).
28.
StraubeJF (1998) Moisture control and enclosure wall systems. Doctoral Thesis, University of Waterloo, Waterloo, ON, Canada.
29.
Teasdale-St-HilaireADeromeD (2005) State-of-the-art review of simulated rain infiltration and environmental loading for large-scale building envelope testing. ASHRAE Transactions111: 389–401.
30.
TenwoldeA (2011) A review of ASHRAE standard 160-criteria for moisture control design analysis in buildings. Journal of Testing and Evaluation39: 77–81.
31.
TsongasGGovanDMcGillisJA (1998) Field observations and laboratory tests of water migration in walls with shiplap hardboard siding. In: ASHRAE/DOE/BTECC conference Thermal envelopes of the exterior envelopes of buildings VII/Moisture–practices, Clearwater Beach, Florida, 6–10 December, pp. 469–483.
32.
Van Den BosscheNLacasseMJanssensA (2011) Watertightness of masonry walls: an overview. In: Proceedings of the 12th international conference on durability of building materials and components, Porto, 12–15 April, pp. 49–56.
33.
WaltzMENelsonPE (1999) Wood siding weather protection: don’t get caught in the rain without it. Journal of Building Physics22: 285–302.
34.
WilliamsMFWilliamsBL (1998) An overview of water leakage problems in single-family residences clad with exterior insulation and finish systems (EIFS). In: KudderRJErdlyJL (eds) ASTM STP. West Conshohocken, PA: ASTM. pp. 277–287.
35.
WoodburyC (2009) Stucco in New Residential Construction—A Position Paper—Includes Updates to Original Information. Woodbury, MN: Building Inspection Division, City of Woodbury.
36.
ZhuDReddy MallidiSFazioP (1995) Quantitative driving rain exposure on a vertical wall at various Canadian cities. Building and Environment30: 533–544.
