Practical correlation for thermal resistance of 45° sloped-enclosed airspaces with upward heat flow for building applications

Abstract

Assessing the energy performance of building components with enclosed airspaces requires accurate determination of the thermal resistance (R-value) of the airspaces. The R-value of enclosed airspace depends on its size and orientation, direction of heat transfer through the airspace, and temperatures and emissivities of all surfaces that define the airspace. In previous studies, practical correlations were developed to determine the R-values for vertical enclosed airspaces, horizontal enclosed airspaces with upward heat flow and downward heat flow, and 30° and 45° sloped-enclosed airspaces with downward heat flow. However, to the authors’ best knowledge, there is no such practical correlations available to determine the R-values for wide ranges of dimensions and operating conditions for 30° and 45° sloped-enclosed airspaces with upward heat flow. This paper focused on the thermal performance of 45° sloped-enclosed airspaces with upward heat flow, and the predicted R-values were compared with the R-values provided in ASHRAE Handbook of Fundamentals at different conditions. The dependence of the R-value on the aspect ratio of the enclosed airspaces was also investigated. As well, considerations were given to quantify the potential increase in the R-value of enclosed airspace when a thin sheet having different values of emissivity on both sides was placed in the middle of the airspace. The results showed that depending on the value of the effective emittance and the thickness of the airspace, the R-value could be tripled by incorporating thin a sheet in the middle of the enclosed airspace. Finally, practical correlation were developed to determine the effective R-values of 45° sloped-enclosed airspaces with upward heat flow for wide ranges of aspect ratio, temperature difference across the airspace, mean temperature, and effective emittance. The results showed that the calculated R-values using this correlation were in good agreement with the predicted R-values.

Keywords

Enclosed airspace reflective insulations effective thermal resistance low emissivity materials effective emittance

Get full access to this article

View all access options for this article.

References

ASHRAE (2017) Chapter 26 (Table 3): Heat, air, and moisture control in building assemblies–material properties, SI Edition. In: ASHRAE Handbook–Fundamentals. Atlanta, GA: American Society of Heating, Refrigeration and Air-Conditioning Engineers, Inc.

ASTM C518 (2003) Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the heat flow meter apparatus. In: Annual Book of Standards 04.06. Philadelphia, PA: American Society for Testing and Materials, pp.153–164.

ASTM C1363 (2006) Standard test method for the thermal performance of building assemblies by means of a hot box apparatus. In: 2006 Annual Book of ASTM Standards 04.06. Philadelphia, PA: American Society for Testing and Materials, pp.717–759.

Craven

Garber-Slaght

(2011) Product test: Reflective insulation in cold climates, Technical Report Number TR 2011-01. Fairbanks, AK: Cold Climate Housing Research Center (CCHRC), 99708.

Desjarlais

Yarbrough

(1991) Predictions of the thermal performance of single and multi-airspace reflective insulation materials. In: Graves

Wysocki

(eds) ASTM STP 1116. Philadelphia, PA: American Society for Testing and Materials, pp.24–43.

D’Orazio

Di Perna

Di Giuseppe

, et al. (2012) Thermal performance of an insulated roof with reflective insulation: Field tests under hot climatic conditions. Journal of Building Physics 36(3): 229–246.

Escudero

Martin

Erkoreka

, et al. (2013) Experimental thermal characterization of radiant barriers for building insulation. Journal of Energy and Buildings 59: 62–72.

Fricker

Yarbrough

(2011) Review of reflective insulation estimation methods. Proceedings of Building Simulation. In: 12th Conference of international building performance simulation association, Sydney, 14–16 November, pp.1989–1996.

Goss

Miller

(1989) Literature review of measurement and predictions of reflective building insulation system performance. ASHRAE Transactions 95(2): 651–664.

10.

Han

Yarbrough

Han

(1986) Thermal resistance of wall cavities containing reflective insulation. Journal of Solar Energy Engineering 108: 338–341.

11.

RIMA International (2020) Be Our Zoom Guest for Dr. Hamed SaberNovember 5th. https://rimainternational.org/news/press-room/09-20-be-our-zoom-guest-for-dr-hamed-saber-november-5th/ (accessed December 2020).

12.

Saber

(2012) Investigation of thermal performance of reflective insulations for different applications. Journal of Building and Environment 55: 32–44.

13.

Saber

(2013a) Thermal performance of wall assemblies with low emissivity. Journal of Building Physics 36(3): 308–329.

14.

Saber

(2013b) Practical correlations for the thermal resistance of vertical enclosed airspaces for building applications. Journal of Building and Environment 59: 379–396.

15.

Saber

(2013c) Practical correlation for thermal resistance of horizontal enclosed airspaces with upward heat flow for building applications. Journal of Building and Environment 61: 169–187.

16.

Saber

(2013d) Practical correlation for thermal resistance of 45° sloped enclosed airspaces with downward heat flow for building applications. Journal of Building and Environment 65: 154–169.

17.

Saber

(2014a) Practical correlation for thermal resistance of horizontal enclosed airspaces with downward heat flow for building applications. Journal of Building Physics 37(4): 403–435.

18.

Saber

(2014b) Practical correlation for thermal resistance of low-sloped enclosed airspaces with downward heat flow for building applications. HVAC&R Research Journal 20(1): 92–112.

19.

Saber

Maref

Hajiah

(2020) Effective R-value of enclosed reflective space for different building applications. Journal of Building Physics 43(5): 398–427.

20.

Saber

Maref

Sherrer

, et al. (2012a) Numerical modeling and experimental investigations of thermal performance of reflective insulations. Journal of Building Physics 36(2): 163–177.

21.

Saber

Maref

Swinton

, et al. (2011) Thermal analysis of above-grade wall assembly with low emissivity materials and furred-airspace. Building and Environment 46(7): 1403–1414.

22.

Saber

Maref

Swinton

(2012b) Thermal response of basement wall systems with low-emissivity material and furred airspace. Journal of Building Physics 35(4): 353–371.

23.

Tenpierik

Hasselaar

(2013) Reflective multi-foil insulations for buildings: A review. Journal of Energy and Buildings 56: 233–243.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

2.62 MB