Semi-Markov processes with semi-regenerative states for the availability analysis of chemical process plants with storage units

Abstract

Design to capacity is an engineering principle that is increasingly applied in chemical industry, among others owing to increasing plant sizes and associated investments. This principle aims to reduce over-capacity, over-sized buffers and excessive redundancy. Concurrently, a high level of availability is targeted over the entire production chain. The consequences of unavailability of highly interconnected chemical process plants can be significant because a technical disruption in one plant is able to spread over the entire production network. In chemical process plants not only technical equipment determines the availability, but also storage units, which are able to bridge times of planned or unplanned interruptions of production. To find a balance between the principle of design to capacity and high production availability, the influence of different design parameters, such as capacity of production units, redundancy concept and the size of storage units, have to be evaluated and integrated in the design process. In this article, we present an analytical method for availability evaluation based on extending Semi-Markov processes integrating storage units and multiple production lines. Semi-regenerative states are used to capture the characteristics of storage units, and an approach is proposed in this work to assign distributions for the remaining holding times in these states. The proposed modelling and analysis are demonstrated on two case studies.

Keywords

Availability analysis chemical process plants storage units Semi-Markov processes semi-regenerative states

Get full access to this article

View all access options for this article.

References

Koolen

JLA

. Design of simple and robust process plants. Weinheim: John Wiley & Sons, 2001, p.475.

Mannan

. Lees’ loss prevention in the process industries hazard identification, assessment and control. 4th ed. Oxford: Butterworth-Heinemann, 2012.

Koolen

JLA

Sinke

Dauwe

. Optimization of a total plant design. Computers Chem Engng 1999; 23(Suppl): S31–34.

Dubi

. Analytic & Monte Carlo methods for realistic systems analysis. Math Computers Sim 1998; 47: 243–269.

Borgonovo

Marseguerra

Zio

. A Monte Carlo methodological approach to plant availability modeling with maintenance, aging and obsolescence. Rel Engng Sys Saf 2000; 67: 61–73.

Fabricius

SMO

. Modeling and simulation for plant performability assessment with application to maintenance in the process industry. Zurich, 2003, p.202.

Hamada

Martz

Berg

. Optimizing the product-based availability of a buffered industrial process. Rel Engng Sys Saf 2006: 1039–1048.

Wijngaard

. The effect of interstage buffer storage on the output of two unreliable production units in series, with different production rates. AIIE Trans 1979; 11: 42–47.

Malathronas

Perkins

Smith

. The availability of a system of two unreliable machines connected by an intermediate storage tank. IIE Trans 1983; 15: 195–201.

10.

Henley

Hoshino

. Effect of storage tanks on plant availability. Ind Engng Chem Fundament 1977; 16: 439–443.

11.

Barlow

Proschan

Hunter

. Mathematical theory of reliability. [Unabridged republication] ed. Philadelphia: Siam, 1996, p.258.

12.

Zhao

. Availability for repairable components and series systems. IEEE Trans Reliab 1994; 43: 329–334.

13.

Zitzler

Thiele

. Multiobjective evolutionary algorithms: a comparative case study and the strength Pareto approach. IEEE Trans Evolut Comput 1999; 3: 257–271.

14.

Limnios

Oprisan

. Semi-Markov processes and reliability. Boston: Birkhäuser, 2001, p.222.

15.

Howard

. Semi-Markov and decision processes. New York: Wiley, 1971, p.577–1108, I-1–12.

16.

Gaede

K-W

. Zuverlaessigkeit - mathematische Modelle. München Wien: Hanser, 1977, p.249.

17.

Ravichandran

. Stochastic methods in reliability theory. New York: Wiley, 1990, p.201.

18.

Bernet

. Modellierung reparierbarer Systeme durch Markoff- und Semi-regenerative Prozesse. Zurich, 1992, p.143.

19.

Nakagawa

Osaki

. Markov renewal processes with some non-regeneration points and their application to reliability theory. Microelectron Rel 1976: 633–636.

20.

Srinivasan

. On a class of non-Markovian processes. Madras, 1962, p.30.

21.

Cox

Miller

. The theory of stochastic processes. [Repr.] ed. London: Chapman and Hall, 1984, p.398.

22.

Alfa

Srinivasa Rao

TSS

. Supplementary variable technique in stochastic models. Prob Engng Info Sci 2000; 14: 203–218.

23.

Singh

Billinton

. System reliability modelling and evaluation. London: Hutchinson, 1977, p.248.

24.

Whitt

. Continuity of generalized semi-markov processes. Math Opers Res 1980; 5: 494–501.

25.

Haddad

Moreaux

. Approximate analysis of non markovian stochastic systems with multiple time scale delays. In: The IEEE Computer Society’s 12th annual international symposium on modeling, analysis, and simulation of computer and telecommunications systems (MASCOTS). Volendam, 2004, p.23–30.

26.

Neuts

. Matrix-geometric solutions in stochastic models an algorithmic approach. New York: Dover, 1994, p.332.

27.

Cox

Hand

Herzberg

. Selected statistical papers of Sir David Cox. Cambridge: Cambridge University Press, 2006.

28.

IEC TC/SC 1. IEC 60050–191 Ed. 1.0: International electrotechnical vocabulary Part 191: Dependability, 1990.

29.

Fink

. Availability analysis of chemical process plants with storage units applying semi-Markov processes with semi-regenerative states. PSAM 11 and ESREL 2012. Helsinki, Finland: IAPSAM & ESRA, 2012.