Thin film coatings are required to improve the performance of components to resist harsh environments as the modern industry grows. In this study, Ni–Ag coatings with various Ag content were deposited on the Cu surface using an electrodeposition technique. The Ni–Ag coatings were deposited to enhance the tribological properties of the coatings and increase the service life of the friction-sliding components. Ni–6wt%Ag, Ni–8wt%Ag, and Ni–10wt%Ag coatings were deposited. A solid solution of Ni–Ag was formed in the coatings. As the concentration of NiSO4 decreased in the electrolyte, the content of Ag in the coatings increased with the granular morphological characteristics. The increase in Ag content reduces the coefficient of friction (CoF) on comparing the initial running-in period and is stable after some time. The initial decrease was due to the surface roughness. The CoF and wear rate were low for all Ag contents compared to the copper substrate due to the effect of Ag solid lubricant material in prepared coatings.
YeFLouZWangY,et al.Wear mechanism of Ag as solid lubricant for wide range temperature application in micro-beam plasma cladded Ni60 coatings. Tribol Int2022; 167: 107402.
2.
LiuXB, et al.Effects of temperature and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating. Compos Part B Eng2013; 53: 347–354.
3.
YangMS, et al.Microstructure and wear behaviors of laser clad NiCr/Cr3C2-WS2 high temperature self-lubricating wear-resistant composite coating. Appl Surf Sci2012; 258: 3757–3762.
4.
KumarAKumarMTailorS. Self-lubricating composite coatings: a review of deposition techniques and material advancement. Mater Today Proc2023: 1–12. doi: https://doi.org/10.1016/j.matpr.2023.01.035.
5.
RenAKangMFuX. Tribological behaviour of Ni/WC–MoS2 composite coatings prepared by jet electrodeposition with different nano-MoS2 doping concentrations. Eng Fail Anal2023; 143: 106934.
6.
Kumar DasA. Effect of solid lubricant addition in coating produced by laser cladding process: a review. Mater Today Proc2022; 56: 1274–1280.
7.
ZhuSChengJQiaoZ,et al.High temperature solid-lubricating materials: a review. Tribol Int2019; 133: 206–223.
8.
KumarRAntonovM. Self-lubricating materials for extreme temperature tribo-applications. Mater Today Proc2020; 44: 4583–4589.
9.
WangDTanHChenW, et al.Tribological behavior of Ni3Al–Ag based self-lubricating alloy with Ag2MoO4 formed by high temperature tribo-chemical reaction. Tribol Int2021; 153: 1–11.
10.
TyagiRXiongDSLiJ,et al.Elevated temperature tribological behavior of Ni based composites containing nano-silver and hBN. Wear2010; 269: 884–890.
11.
KutschejKMittererCMulliganCP,et al.High-temperature tribological behavior of Cr’N-Ag self-lubricating coatings. Adv Eng Mater2006; 8: 1125–1129.
12.
BasnyatP, et al.Mechanical and tribological properties of CrAlN-Ag self-lubricating films. Surf Coatings Technol2007; 202: 1011–1016.
13.
HuJJMuratoreCVoevodinAA. Silver diffusion and high-temperature lubrication mechanisms of YSZ-Ag-Mo based nanocomposite coatings. Compos Sci Technol2007; 67: 336–347.
14.
RaghupathyYNatarajanKASrivastavaC. Anti-corrosive and anti-microbial properties of nanocrystalline Ni-Ag coatings. Mater Sci Eng B Solid-State Mater Adv Technol2016; 206: 1–8.
15.
MathewAMunichandraiahNMohan RaoG. Synthesis and magnetic studies of flower-like nickel nanocones. Mater Sci Eng B2009; 158: 7–12.
16.
MundotiyaBMUllahWKumarK. Electrodeposition approaches to deposit the single-phase solid solution of Ni-Ag alloy. Intech Open2018: 1–16. doi: https://doi.org/10.5772/intechopen.80586.
17.
SrivastavaCMundotiyaBM. Electron microscopy of microstructural transformation in electrodeposited Ni-rich, Ag-Ni film. Thin Solid Films2013; 539: 102–107.
SrivastavaCMundotiyaBM. Morphology dependence of Ag-Ni solid solubility. Electrochemical and Solid-State Letters2012; 15: 10–15.
20.
SrivastavaCMundotiyaBM. Size and solid solubility in electrodeposited Ag-Ni nanoparticles. Mater Sci Forum2013; 736: 21–26.
21.
ThangavelE, et al.RF Magnetron sputtering mediated NiTi/Ag coating on Ti-alloy substrate with enhanced biocompatibility and durability. Mater Sci Eng C2019; 99: 304–314.
22.
SenthilkumarGBharadwajSAkhilR, et al.Microstructure and corrosion behaviour of Ni-Ag and Ni-Cu composite coating for industrial applications. AIP Conf Proc2020; 2311: 080009.
23.
DuanW, et al.Study on the formation mechanism of the glaze film formed on Ni/Ag composites. Tribol Int2016; 95: 324–332.
24.
AouadiSM, et al.Adaptive VN/Ag nanocomposite coatings with lubricious behavior from 25 to 1000 °C. Acta Mater2010; 58: 5326–5331.
25.
GoralALitynska-DobrzynskaLKotM. Effect of surface roughness and structure features on tribological properties of electrodeposited nanocrystalline Ni and Ni/Al2O3 coatings. J Mater Eng Perform2017; 26: 2118–2128.
26.
ZuoBYuLXuJ. Effect of Ag content on friction and wear properties of TiCN/Ag films in different service environments. Vacuum2023; 212: 112029.
PurushothamNParthasarathiNLBabuPS, et al.High temperature sliding wear behavior of detonation sprayed Ni-5wt%Al coating. Wear2023; 530–531: 205030.
29.
KimKSWinogradN. X-ray photoelectron spectroscopic studies of nickel-oxygen surfaces using oxygen and argon ion-bombardment. Surf Sci1974; 43: 625–643.
30.
RaoPSinghSKumarK, et al.Understanding the evolution of microstructure, phase homogeneity, electrochemical characteristics and surface chemistry of electrodeposited MnCrCoFeNiCu high entropy alloy coating with reinforcement of carbon nanotubes. Surf Coatings Technol2023; 471: 129912.
