Aluminium alloys (Al 7XXX), due to their low hardness and poor friction-wear behaviour have restricted structural and tribological applications. Hence, researchers are now focusing on 2D solid lubricants as reinforcement in Al 7XXX metal matrix composites to enhance their mechanical and tribological properties. 2D solid lubricants possess better hardness, self-lubrication, low friction, high wear resistance, and higher thermal stability. This article reports the influence of 2D solid lubricants on the mechanical and tribological behaviour of Al 7XXX Series metal matrix composites fabricated by different techniques available for Al MMCs. This article also, details the causes of mechanical and tribological failures in Al 7XXX MMCs, aiding research in overcoming such issues for novel Al-reinforced 2D solid lubricant MMCs. In addition, various wear mechanisms like delamination, adhesive, and oxidative wear reported for the Al 7XXX metal matrix composites at various tribological conditions are comprehensively presented in this review article.
SanninoAPRackHJ. Dry sliding wear of discontinuously reinforced aluminum composites: review and discussion. Wear1995; 189: 1–19.
2.
VenclABobićIStankovićM, et al.Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale. J. Brazilian Soc Mech Sci Eng2020; 42: 1–12.
3.
SharmaPKhandujaDSharmaS. Tribological and mechanical behavior of particulate aluminum matrix composites. J Reinf Plast Compos2014; 33: 2192–2202.
4.
ToorZSZafarMM. Corrosion degradation of aluminium alloys using a computational framework. Tribol Mater2022; 1: 150–156.
5.
VermaASSumankantSuriNM, et al.Corrosion behavior of aluminum base particulate metal matrix composites: a review. Mater Today Proc2015; 2: 2840–2851.
6.
JawalkarCSKantS. A review on use of aluminium alloys in aircraft components. I-Manager’s J Mater Sci2015; 3: 33–38.
7.
MavhunguSTAkinlabiETOnitiriMA,et al.Aluminum matrix composites for industrial use: advances and trends. Procedia Manuf2017; 7: 178–182.
8.
YinZFuBXueT, et al.Development of helicopter power transmission system technology. Appl Mech Mater2011; 86: 1–17.
9.
ImranMKhanARA. Characterization of Al-7075 metal matrix composites: a review. J Mater Res Technol2019; 8: 3347–3356.
10.
HudaZEdiP. Materials selection in design of structures and engines of supersonic aircrafts: a review. Mater Des2013; 46: 552–560.
11.
LiuJ. Advanced aluminum and hybrid aerostructures for future aircraft. Mater Sci Forum2006; 519–521: 1233–1238.
12.
DursunTSoutisC. Recent developments in advanced aircraft aluminium alloys. Mater Des2014; 56: 862–871.
13.
AsmatuluR. Nanocoatings for corrosion protection of aerospace alloys. In: Corros. Prot. Control using nanomater. UK: Woodhead Publishing, Elsevier, 2012, pp.357–374. https://doi.org/10.1533/9780857095800.2.357
14.
ZhouBLiuBZhangS. The advancement of 7xxx series aluminum alloys for aircraft structures: A review. Metals (Basel)2021; 11: 1–29.
15.
MaKLaverniaEJSchoenungJM. Particulate reinforced aluminum alloy matrix composites - A review on the effect of microconstituents. Rev Adv Mater Sci2017; 48: 91–104.
16.
DineshMRavindranR. Tensile and hardness behavior of aluminum 7075 and zinc. Int. Arch. Appl. Sci. Technol2016; 7: 39–46.
17.
AllamIM. Solid lubricants for applications at elevated temperatures: a review. J. Mater. Sci1991; 26: 3977–3984.
18.
LinceJR. Effective application of solid lubricants in spacecraft mechanisms. Lubricants2020; 8: 74.
KhatkarSKSuriNMKantS, et al.A review on mechanical and tribological properties of graphite reinforced self lubricating hybrid metal matrix composites. Rev Adv Mater Sci2018; 56: 1–20.
24.
ReevesCJMenezesPLLovellMR,et al.Tribology of solid lubricants. In: MenezesPLNosonovskyMIngoleSPKailasSVLovellMR (eds) Tribol. Sci. Eng.New York, NY: Springer New York, 2013, pp.447–494. https://doi.org/10.1007/978-1-4614-1945-7_13.
ScharfTWPrasadSV. Solid lubricants: a review. J Mater Sci2013; 48: 511–531.
27.
LeeJHChoD-HParkBH,et al.Nanotribology of 2D materials and their macroscopic applications. J Phys D Appl Phys2020; 53: 393001.
28.
UzomaPCHuHKhademM,et al.Tribology of 2D nanomaterials: a review. Coatings2020; 10: 97.
29.
SahooS. Self-lubricating composites with 2D materials as reinforcement: a new perspective. Reinf Plast2021; 65: 101–103.
30.
MiyoshiK. Solid Lubricants and Coatings for ExtremeEnvironments: State-of-the-Art Survey, NASA, OH, United States, 2007. https://ntrs.nasa.gov/search.jsp?R=20070010580 2019-08-30T00:35:22+00:00Z
31.
ZhangYChromikRR. Tribology of self-lubricating metal matrix composites. In: MenezesPLRohatgiPKOmraniE (eds) Self-lubricating compos.Berlin, Heidelberg: Springer, 2018, pp.33–73. https://doi.org/10.1007/978-3-662-56528-5_2
32.
GuptaASakthivelTSealS. Recent development in 2D materials beyond graphene. Prog Mater Sci2015; 73: 44–126.
33.
SunYWLiuWHernandezI, et al.3D Strain in 2D materials: to what extent is monolayer graphene graphite?Phys Rev Lett2019; 123: 135501.
34.
MittalDSinghDKumar SharmaS. Thermal characteristics and tribological performances of solid lubricants: a Mini review. In: Adv. Rheol. Mater. London, UK: IntechOpen, 2023, pp.13. https://doi.org/10.5772/intechopen.109982
35.
WozniakJKosteckiMCyganT, et al.Self-lubricating aluminium matrix composites reinforced with 2D crystals. Compos Part B Eng2017; 111: –9.
36.
SunYZhangCLiuB, et al.Reduced graphene oxide reinforced 7075 Al matrix composites: Powder synthesis and mechanical properties. Metals (Basel)2017; 7: 499, 1–14.
37.
LokeshKSChethanICNaveen KumarKR, et al.Determination of compressive strength of graphene reinforced with aluminium-7075 metal matrix composites. Int J Mech Eng Technol2018; 9: 327–335.
38.
LiXSunMShanC, et al.Mechanical properties of 2D materials studied by in situ microscopy techniques. Adv Mater Interfaces2018; 5: 1–24.
39.
LiuLZhouMLiX, et al.Research progress in application of 2D materials in liquid-phase lubrication system. Materials (Basel)2018; 11: 1314, 1–16.
40.
DuXMZhengKFZhaoT,et al.Fabrication and characterization of Al 7075 hybrid composite reinforced with graphene and SiC nanoparticles by powder metallurgy. Dig J Nanomater Biostructures2018; 13: 1133–1140.
41.
LiuLZhouMJinL, et al.Recent advances in friction and lubrication of graphene and other 2D materials: mechanisms and applications. Friction2019; 7: 199–216.
42.
PatilSHaneefMManjunathLH,et al.Investigation on mechanical properties of hybrid graphene and beryl reinforced aluminum 7075 composites. IOP Conf Ser Mater Sci Eng2019; 577: 0–10.
43.
RajRRYoganandhJSaravananMSS,et al.Effect of graphene addition on the mechanical characteristics of AA7075 aluminium nanocomposites. Carbon Lett2021; 31: 125–136.
44.
min XiaHZhangLchao ZhuY, et al.Mechanical properties of graphene nanoplatelets reinforced 7075 aluminum alloy composite fabricated by spark plasma sintering. Int J Miner Metall Mater2020; 27: 1295–1300.
45.
ManuBRGuptaAJayatissaAH. Tribological properties of 2D materials and composites—A review of recent advances. Materials (Basel)2021; 14: 1630.
MinYJKangKHKimDE. Development of polyimide films reinforced with boron nitride and boron nitride nanosheets for transparent flexible device applications. Nano Res2018; 11: 2366–2378.
48.
ChenJChenBLiJ, et al.Enhancement of mechanical and wear resistance performance in hexagonal boron nitride-reinforced epoxy nanocomposites. Polym Int2017; 66: 659–664.
49.
GaoYPicotOTBilottiE,et al.Influence of filler size on the properties of poly(lactic acid) (PLA)/graphene nanoplatelet (GNP) nanocomposites. Eur Polym J2017; 86: 117–131.
50.
DalarODoğruAKaratay KutmanM, et al.Electrical conductivity of graphene/Si3N4 doped PLA produced by fused filament fabrication. Tribol Mater2023; 2: 55–61.
51.
IvanovEKotsilkovaRXiaH, et al.PLA/Graphene/MWCNT composites with improved electrical and thermal properties suitable for FDM 3D printing applications. Appl Sci2019; 9: 1209, 1–14.
52.
NietoABishtALahiriD, et al.Graphene reinforced metal and ceramic matrix composites: a review. Int Mater Rev2017; 62: 241–302.
53.
SedlákRKovalčíkováABalkoJ, et al.Effect of graphene platelets on tribological properties of boron carbide ceramic composites. Int J Refract Met Hard Mater2017; 65: 57–63.
54.
HvizdošPVenclA. Ceramic matrix composites with carbon nanophases: development, structure, mechanical and tribological properties and electrical conductivity. Encycl Mater Compos2021; 2: 116–133.
55.
KanthavelKSumeshKRSaravanakumarP. Study of tribological properties on al/al 2 O 3 /MoS 2 hybrid composite processed by powder metallurgy. Alexandria Eng J2016; 55: 13–17.
56.
ZengXYuJFuD, et al.Wear characteristics of hybrid aluminum-matrix composites reinforced with well-dispersed reduced graphene oxide nanosheets and silicon carbide particulates. Vacuum2018; 155: 364–375.
57.
Seyyed AfghahiSSJafarianMPaidarM,et al.Diffusion bonding of Al 7075 and Mg AZ31 alloys: process parameters, microstructural analysis and mechanical properties. Trans Nonferrous Met Soc China2016; 26: 1843–1851.
58.
PeriasamyKSivashankarNChandrakumarS,et al.Measurement of friction and wear in aluminum alloy Al7075/Sic & Gr processed by friction stir method. Int J Innov Technol Explor Eng2020; 9: 278–281.
59.
PatleHMahendiranPRatna SunilB,et al.Hardness and sliding wear characteristics of AA7075-T6 surface composites reinforced with B4C and MoS2 particles. Mater Res Express2019; 6: 086589, 1–13.
60.
ThankachanTPrakashKSKavimaniV. Investigating the effects of hybrid reinforcement particles on the microstructural, mechanical and tribological properties of friction stir processed copper surface composites. Compos Part B Eng2019; 174: 107057.
61.
PashaSAReddyRPNarayanaLP. Wear behavior and microstructural characterization of AA7075/MWCNT surface composites fabricated through friction stir processing. IOSR J Mech Civ Eng2017; 14: 140–146.
62.
NavuluriVKBellamkondaPNSudabathulaS. Characterization of graphite and zirconium oxide on Al 7075 metal matrix composites MMCS fabricated by stir casting technique. Int J Trend Sci Res Dev2019; 3: 820–823.
63.
MadhukarPSelvarajNRaoC. Manufacturing of aluminium nano hybrid composites: a state of review. IOP Conf Ser Mater Sci Eng2016; 149: 012114.
64.
MadhukarPSelvarajNPunugupatiG, et al.Microstructure studies of AA7150-hBN nanocomposites fabricated by ultrasonic assisted stir casting. Mater Res Express2019; 6: 116545.
65.
MadhukarPSelvarajNRaoCSP,et al.Fabrication and characterization two step stir casting with ultrasonic assisted novel AA7150-hBN nanocomposites. J Alloys Compd2020; 815: 152464.
66.
MadhukarPSelvarajNRaoCSP,et al.Tribological behavior of ultrasonic assisted double stir casted novel nano-composite material (AA7150-hBN) using Taguchi technique. Compos Part B Eng2019; 175: 107136.
67.
KannanCRamanujamR. Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments. Mater Res Express2018; 5: 1–15.
68.
KannanCRamanujamR. Effectiveness evaluation of molten salt processing and ultrasonic cavitation techniques during the production of aluminium based hybrid nanocomposites - an experimental investigation. J Alloys Compd2018; 751: 183–193.
69.
ReddyBSChidambaramKKandasamyJ. Potential assessment of Al 7075/BN composites for lightweight applications. AIP Conf Proc2020; 2283: 1–8.
70.
AgarwalPKishoreAKumarV, et al.Fabrication and machinability analysis of squeeze cast Al 7075/ h-BN/graphene hybrid nanocomposite. Eng Res Express2019; 1: 1–20.
71.
DhanashekarMSenthil KumarVS. Squeeze casting of aluminium metal matrix composites - an overview. Procedia Eng2014; 97: 412–420.
72.
KumarasamySPVijayananthKThankachanT,et al.Investigations on mechanical and machinability behavior of aluminum/flyash cenosphere/Gr hybrid composites processed through compocasting. J Appl Res Technol2017; 15: 430–441.
73.
WangHNingCHuangY, et al.Improvement of abrasion resistance in artificial seawater and corrosion resistance in NaCl solution of 7075 aluminum alloy processed by laser shock peening. Opt Lasers Eng2017; 90: 179–185.
74.
CaiZZhuMLinX. Friction and wear of 7075 aluminum alloy induced by torsional fretting. Trans Nonferrous Met Soc China2010; 20: 371–376.
75.
CaiZZhuMShenH, et al.Torsional fretting wear behaviour of 7075 aluminium alloy in various relative humidity environments. Wear2009; 267: 330–339.
76.
LakshmananMSelwin RajaduraiJChakkravarthyV,et al.Tribological investigations on h-BN/NiTi inoculated Al7075 composite developed via ultrasonic aided squeeze casting. Mater Lett2021; 285: 129113.
77.
BaradeswaranAElayaperumalA. Mechanical and tribological behaviour of graphite- reinforced aluminium matrix composites. J Balk Tribol Assoc2013; 19: 354–364.
78.
BaradeswaranAPerumalEA. Effect of graphite on tribological and mechanical properties of AA7075 composites. Tribol Trans2015; 58: –6.
79.
BaradeswaranAPerumalAE. Wear and mechanical characteristics of Al 7075/graphite composites. Compos Part B Eng2014; 56: 472–476.
80.
KannanCRamanujamRBalanASS. Machinability studies on Al 7075/BN/Al 2 O 3 squeeze cast hybrid nanocomposite under different machining environments. Mater Manuf Process2018; 33: 587–595.
81.
RamanujaCMNadeemMSachinB, et al.Fabrication and testing of aluminium 7075 composites reinforced with molybdenum disulphide. Int J Innov Res Technol2018; 5: 905–910.
82.
HuangSJPengWYVisicB,et al.Al alloy metal matrix composites reinforced by WS2 inorganic nanomaterials. Mater Sci Eng A2018; 709: 290–300.
83.
ShinSEKoYJBaeDH. Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures. Compos Part B Eng2016; 106: 66–73.
84.
ZhuMKouHWangK, et al.Promising functional two-dimensional lamellar metal thiophosphates: synthesis strategies, properties and applications. Mater Horizons2020; 7: 3131–3160.
85.
NisteVBRatoiMTanakaH, et al.Self-lubricating Al-WS2 composites for efficient and greener tribological parts. Sci Rep2017; 7: 1–14.
86.
NisteVBRatoiM. Tungsten dichalcogenide lubricant nanoadditives for demanding applications. Mater Today Commun2016; 8: 1–11.
87.
OmraniEMoghadamADMenezesPL,et al.Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—A review. Int J Adv Manuf Technol2016; 83: 325–346.
88.
RambabuPPrasadNEKutumbaraoVV,et al.Aerospace materials and material technologies, volume 1: aerospace material technologies. Aerosp Mater Mater Technol2017; 1: 586. 1 Aerosp. Mater.
89.
MoghadamDAOmraniEMenezesPL,et al.Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene - A review. Compos Part B Eng2015; 77: 402–420.
90.
ImranMKhanARAMegeriS,et al.Study of hardness and tensile strength of aluminium-7075 percentage varying reinforced with graphite and bagasse-ash composites. Resour. Technol2016; 2: 81–88.
91.
KumarRDhimanS. A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis. Mater Des2013; 50: 351–359.
92.
Deaquino-LaraRSoltaniNBahramiA, et al.Tribological characterization of Al7075-graphite composites fabricated by mechanical alloying and hot extrusion. Mater Des2015; 67: 224–231.
93.
AnithaPBalrajUS. Dry sliding wear performance of Al/7075/Al2O3p/Grp hybrid metal matrix composites. Mater Today Proc2017; 4: 3033–3042.
94.
MohanavelVRajanKSuresh KumarS, et al.Study on mechanical properties of graphite particulates reinforced aluminium matrix composite fabricated by stir casting technique. Mater Today Proc2018; 5: 2945–2950.
95.
SaravananCSathivelPKajendirakumarSV,et al.Mechanical and wear behaviour of AA7075 alloy reinforced with graphite. Mater Today Proc2020; 37: 868–871.
96.
VenclAVučetićFBobićB, et al.Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiC p /Gr p composites with graphite macroparticles. Int J Adv Manuf Technol2019; 100: 2135–2146.
97.
SharmaVMallickAKumarK. Effect of graphene nanoplates on the mechanical and corrosion properties of aluminium nanocomposite fabricated by powder metallurgy. Tribol Mater2023; 2: 154–161.
98.
TrdanUGrumJ. Evaluation of corrosion resistance of AA6082-T651 aluminium alloy after laser shock peening by means of cyclic polarisation and ElS methods. Corros Sci2012; 59: 324–333.
99.
HarichandranRSelvakumarN. Microstructure and mechanical characterization of (B4C+ h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting. Int J Mech Sci2018; 144: 814–826.
100.
XiaZPLiZQLuCJ, et al.Structural evolution of Al/BN mixture during mechanical alloying. J Alloys Compd2005; 399: 139–143.
101.
GorshenkovMVKaloshkinSDTcherdyntsevVV, et al.Dry sliding friction of Al-based composites reinforced with various boron-containing particles. J Alloys Compd2012; 536: S126–S129.
102.
SoniSKThomasB. Microstructure, mechanical properties and machinability studies of Al7075/SiC/h-BN hybrid nanocomposite fabricated via ultrasonic-assisted squeeze casting. FME Trans2020; 48: 532–542.
103.
KuldeepBRavikumarKPPradeepS. Effect of hexagonal boron nitrate on microstructure and mechanical behavior of Al7075 metal matrix composite producing by stir casting technique. Int J Eng Trans A Basics2019; 32: 1017–1022.
104.
RakshathSSureshaBSasi KumarR,et al.Dry sliding and abrasive wear behaviour of Al-7075 reinforced with alumina and boron nitride particulates. Mater Today Proc2020; 22: 619–626.
105.
Vignesh KumarVRajaKChandrasekaranK,et al.Microstructural characterization and mechanical properties of Al7075/BN metal matrix composites prepared by conventional casting method. Mater Res Express2019; 6: 1–25.
106.
RajaKChandra SekarVSVignesh KumarV, et al.Microstructure characterization and performance evaluation on AA7075 metal matrix composites using RSM technique. Arab J Sci Eng2020; 45: 9481–9495.
107.
BeyanagariSRKandasamyJ. A comparative study on the mechanical and tribological characteristics of AA7075/h-BN and AA7075/h-BN/MoS 2 hybrid nano-composites produced using stir-squeeze casting process. Surf Topogr Metrol Prop2021; 9: 035019.
108.
BeyanagariSRKandasamyJ. Tribological performance evaluation of h-BN nanoparticle reinforced AA 7075 and as-cast AA7075 using Taguchi and genetic algorithm. Surf Topogr Metrol Prop2021; 9: 045009.
109.
YathirajKChandraiahMMohan KumarA. Evaluation of mechanical properties of aluminium 6061 reinforced with boron nitride MMC’s using OM. Int J Innov Res Sci Eng Technol (An ISO)2007; 3297: 16128–16133.
110.
FiresteinKLCorthaySSteinmanAE, et al.High-strength aluminum-based composites reinforced with BN, AlB2 and AlN particles fabricated via reactive spark plasma sintering of Al-BN powder mixtures. Mater Sci Eng A2017; 681: –9.
111.
Penchal ReddyMManakariVParandeG, et al.Enhancing compressive, tensile, thermal and damping response of pure Al using BN nanoparticles. J Alloys Compd2018; 762: 398–408.
112.
KhatavkarRAMandaveAKBaviskarDD,et al.Influence of hexagonal boron nitride on tribological properties of AA2024-hBN metal matrix composite. Int Res J Eng Technol2018; 5: 3792–3798.
113.
PitchayyapillaiGSeenikannanPRajaK,et al.Al6061 hybrid metal matrix composite reinforced with alumina and molybdenum disulphide. Adv Mater Sci Eng2016; 2016: 1–9.
114.
LiewKWChiaSYKokCK,et al.Evaluation on tribological design coatings of Al2O3, Ni-P-PTFE and mos2 on aluminium alloy 7075 under oil lubrication. Mater Des2013; 48: 77–84.
115.
FigueroaRAbreuCMCristóbalMJ,et al.Effect of nitrogen and molybdenum ion implantation in the tribological behavior of AA7075 aluminum alloy. Wear2012; 276–277: 53–60.
116.
MoreKAPawarSY. Tribological investigation of Al7075/TiC/MoS2 hybrid composite material. Int Res J Eng Technol2018; 5: 2052–2058.
117.
SarithaPSaikumarGVenkatreddyR,et al.Mechanical characterization and wear behaviour of Al7075 alloy reinforced with alumina and molybdenum disulphide. Int J Mech Prod Eng Res Dev2018; 8: 395–404.
118.
RanjanAShanmugasundaramA. Experimental investigation of mechanical and tribological properties of al 7075—MoS2/ZrO2/Ni hybrid composite. In: LakshminarayananAKIdapalapatiSVasudevanM (eds) Adv. Mater. Metall. Lect. Notes Mech. Eng., Singapore: Springer, 2019, pp.239–248. https://doi.org/10.1007/978-981-13-1780-4
119.
LiuSWangYMuthuramalingamT,et al.Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications. Compos Part B Eng2019; 176: 107329.
120.
VarunKMGoudRR. Investigation of mechanical properties of Al 7075/SiC/MoS2 hybrid composite. Mater Today Proc2019; 19: 787–791.
121.
KannanVVKannanVSundararajanD, et al.Experimental investigation on turning characteristics of TiC/MoS2 nanoparticles reinforced Al7075 using TiN coated cutting tool. SAE Tech Pap2019; 28: 1–11.
122.
RamananGSureshSRajesh PrabhaN,et al.Characterization, wear surface roughness and tensile failure analysis of Al7075-TiC-MoS2 hybrid composites using online acoustic emission. Mater Res Express2019; 6: 0–31.
123.
VinothKSSubramanianRDharmalingamS,et al.Mechanical and tribological characteristics of stir-cast Al-Si10Mg and self-lubricating Al-Si10Mg/MoS 2 composites. Mater Tehnol2012; 46: 497–501.
124.
Maivizhi SelviSSaravana KumarAIsaac Daniel RajG, et al.Influence of MoS2 on microstructure and mechanical behaviours of Al6061-Al2O3 hybrid composite. Appl Mech Mater2015; 813–814: 62–66.
125.
JosephJSDKumaragurubaranBSathishS. Effect of MoS2 on the wear behavior of aluminium (AlMg0.5Si) composite. Silicon2020; 12: 1481–1489.
126.
KumarNSharmaAManojMK,et al.Taguchi optimization of tribological properties and corrosion behavior of self-lubricating Al–Mg–Si/MoS2 composite processed by powder metallurgy. J Mater Res Technol2023; 26: 1185–1197.
127.
KumaarRKVinothKSKavithaM. Dry sliding wear performance of AA7075/MoS2 composite materials. J Eng Res2021; 9: 238–254.
128.
RamadossNPazhanivelKGaneshkumarA,et al.Effect of SiC and MoS2 co-reinforcement on enhancing the tribological and anti-corrosive performance of aluminum matrix (Al6063-T6) nanocomposites. Silicon2022; 14: 5471–5479.
129.
SatishCVijay KumarKPrasadS, et al.Effect of Al2O3 and MoS2 reinforcement on microstructure, mechanical, and wear properties of plasma sprayed aluminium hybrid composite coating. Mater Today Commun2023; 36: 106640.
130.
RengifoS. A Comparison Between Graphene and WS2 as Solid Lubricant Additives to Aluminum for Automobile Applications. Florida, USA: Florida International University, 2015. https://doi.org/10.25148/etd.FI15032181
131.
SelviEMaYAksoyR, et al.High pressure X-ray diffraction study of tungsten disulfide. J Phys Chem Solids2006; 67: 2183–2186.
132.
Ramakrishna MatteHSSGomathiAMannaAK, et al.Mos2 and WS2 analogues of graphene. Angew Chemie - Int Ed2010; 49: 4059–4062.
133.
MaharajDBhushanB. Effect of MoS2 and WS2 nanotubes on nanofriction and wear reduction in dry and liquid environments. Tribol Lett2013; 49: 323–339.
134.
PrasadSVZabinskiJSDyhouseVJ. Pulsed-laser deposition of tungsten disulphide films on aluminium metal-matrix composite substrates. J Mater Sci Lett1992; 11: 1282–1284.
135.
NakayamaNSakagamiSHoritaM, et al.Fabrication of WS2-dispersed Al composite material by compression shearing method at room temperature. Key Eng Mater2014; 622–623: 1066–1074.
136.
RengifoSZhangCHarimkarS, et al.Effect of WS2 addition on tribological behavior of aluminum at room and elevated temperatures. Tribol Lett2017; 65. https://doi.org/10.1007/s11249-017-0856-2
137.
VaziriHSShokuhfarAAfghahiSSS. Investigation of mechanical and tribological properties of aluminum reinforced with tungsten disulfide (WS2) nanoparticles. Mater Res Express2019; 6: 045018.
138.
VaziriHSShokuhfarAAfghahiSSS. Synthesis of WS2/CNT hybrid nanoparticles for fabrication of hybrid aluminum matrix nanocomposite. Mater Res Express2020; 7: 1–13.
139.
PradhanMKSinghB. Machinability and multi-response optimization of EDM of Al7075/SIC/WS2 hybrid composite using the PROMETHEE method. In: KumarKDavimJP (eds) Optim. Eng. Probl.1st ed.New Jersey, USA: Wiley, 2019, pp.39–75. https://doi.org/10.1002/9781119644552.ch3
140.
PatelRKPradhanMK, et al.Process parameters optimization of electrical discharge machining of Al7075/SiC/WS2 by using MCDM. In: NarayananRG (eds) Lect. Notes in Multidisciplinary Industrial. Eng.,Singapore: Springer Nature, 2019, pp.329–336. https://doi.org/10.1007/978-981-32-9072-3_28
141.
LoganathanPGnanavelbabuARajkumarK,et al.A comparative study of solid lubricant types on the microstructure and mechanical behaviour of AA7075-zirconium boride aerospace composites. IOP Conf Ser Mater Sci Eng2020; 764: 012001.
142.
BegSRizwanMSheikhAM, et al.Advancement in carbon nanotubes: basics, biomedical applications and toxicity. J Pharm Pharmacol2011; 63: 141–163.
143.
CheJÇaginTGoddardWA. Thermal conductivity of carbon nanotubes. Nanotechnology2000; 11: 65–69.
144.
AnasNSDashRKRaoTN,et al.Effect of carbon nanotubes as reinforcement on the mechanical properties of aluminum-copper-magnesium alloy. J Mater Eng Perform2017; 26: 3376–3386.
145.
IrelandRArroncheLLa SaponaraV. Electrochemical investigation of galvanic corrosion between aluminum 7075 and glass fiber/epoxy composites modified with carbon nanotubes. Compos Part B Eng2012; 43: 183–194.
146.
XuRTanZFanG, et al.High-strength CNT/Al-Zn-Mg-Cu composites with improved ductility achieved by flake powder metallurgy via elemental alloying. Compos Part A Appl Sci Manuf2018; 111: 1–11.
147.
WeiHLiZXiongDB, et al.Towards strong and stiff carbon nanotube-reinforced high-strength aluminum alloy composites through a microlaminated architecture design. Scr Mater2014; 75: 30–33.
148.
MokdadFChenDLLiuZY, et al.Deformation and strengthening mechanisms of a carbon nanotube reinforced aluminum composite. Carbon N Y2016; 104: 64–77.
149.
YildirimMÖzyürekDGürüM. Investigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotube. Fullerenes Nanotub Carbon Nanostructures2016; 24: 467–473.
150.
LeeKMJoJOLeeES, et al.Incorporation of carbon nanotubes into oxide layer on 7075 Al alloy by plasma electrolytic oxidation. J Electrochem Soc2011; 158: C325.
151.
LeeKMKoYGShinDH. Incorporation of multi-walled carbon nanotubes into the oxide layer on a 7075 Al alloy coated by plasma electrolytic oxidation: coating structure and corrosion properties. Curr Appl Phys2011; 11: S55–S59.
152.
ThirumaranB. Corrosion behaviour of CNT reinforced AA 7075 nanocomposites. Adv Mater2013; 2: 1.
153.
Carreño-GallardoCUriza-VegaEEstrada-GuelI, et al.Effect of multiwall carbon nanotubes (MWCNs) reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical milling. Microsc Microanal2017; 23: 1930–1931.
154.
Uriza-VegaECarreño-GallardoCLópez-MeléndezC, et al.Mechanical behavior of multiwalled carbon nanotube reinforced 7075 aluminum alloy composites prepared by mechanical milling and hot extrusion. Mater Res2019; 22: 1–9.
155.
GandhiCDixitNMohantyA,et al.Study on effect of heat treatment on mechanical properties of AA7075-MWCNT composite. Mater Today Proc2019; 18: 37–46.
156.
ZhangHBWangBZhangYT, et al.Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites. J. Alloys Compd2020; 814: 152357.
157.
ReddyMSChettySVPremkumarS,et al.Influence of reinforcements and heat treatment on mechanical and wear properties of Al 7075 based hybrid composites. Procedia Mater Sci2014; 5: 508–516.
158.
ChenBZhangJLiangZ, et al.Effects of MoS2 on tribological properties and mechanically mixed layer of al matrix composites. Mater Sci Forum2017; 896: 83–96.
159.
LoganathanARengifoSHernandezAF, et al.Effect of 2D WS2 addition on cold-sprayed aluminum coating. J Therm Spray Technol2017; 26: 1585–1597.
