This study describes a novel method to identify the bat-ball impact location from accelerations measured at the bat knob. The magnitude of mode 1 and mode 2 accelerations were normalized by the swing speed and found as a function of the impact location. The impact location was identified by minimizing the error of normalized acceleration from impacts of batters swinging at different speeds. Impact locations from the accelerations were then compared with locations measured by high-speed video. Good agreement was found for bats with an asymmetric acceleration signature.
SmithLBrokerJNathanA.A study of softball player swing speed. In: SubicATravailoPAlamF (eds) Sports dynamics discovery and application. Melbourne: RMIT University, 2003, pp.12–17.
2.
LyuBSmithLV.Evaluation of wireless bat swing speed sensors. Sports Eng2018; 21(3): 229–234.
3.
KingKHoughJMcGinnisR, et al. A new technology for resolving the dynamics of a swinging bat. Sports Eng2012; 15(1): 41–52.
4.
AguinaldoA.Baseball bat swing sensor validation. San Diego: Center for Human Performance, 2016. pp.1–5.
5.
NathanAMCriscoJJGreenwaldRM, et al. A comparative study of baseball bat performance. Sports Eng2011; 13(4): 153–162.
6.
SmithLKensrudJ.Field and laboratory measurements of softball player swing speed and bat performance. Sports Eng2014; 17(2): 75–82.
7.
NevinsDSmithLKensrudJ.Sensitivity of batted-ball speed to swing speed models. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of sports engineering and technology2019; 233(3): 416–423.
ThomsonWT.Theory of vibration with applications. Boca Raton, FL: CRC Press, 2018.
10.
JaramilloPManarkyKSAdrezinRS, et al. “Sweet Spot” or “Sweet Zone”? Modal Analysis of a Wooden Baseball Bat for Design Optimization. In: Proceedings of the ASME 2003 international mechanical engineering congress and exposition. Dynamic systems and control, volumes 1 and 2, Washington, DC, 15–21 November 2003, pp.1019–1025. ASME.
11.
SuttonADSherwoodJA.Using vibrational analysis to investigate the batted-ball performance of baseball bats. Proc Eng2010; 2(2): 2687–2692.
12.
PotterMVOjedaLVPerkinsNC, et al. Effect of IMU design on IMU-derived stride metrics for running. Sensors2019; 19(11): 2601.
13.
McGinnisRSPerkinsNC.A highly miniaturized, wireless inertial measurement unit for characterizing the dynamics of pitched baseballs and softballs. Sensors2012; 12(9): 11933–11945.
14.
LawrenceILinK.A concordance correlation coefficient to evaluate reproducibility. Biometrics1989; 45: 255–268.
