The mechanical and thermal properties of the pseudostem of Pupunha (Bactris gasipaes) palm were evaluated in order to identify possible engineering applications for this material. The microstructure of the material was analyzed by digital optical microscopy, and microstructural features were quantified. Also, the wear behavior and the shear bond strength of adhesively bonded pupunha planks were analyzed. The results show that the material obtained from the pseudostem of this palm tree has superior mechanical properties, comparable or higher than those of several commonly used hardwoods.
MohantyA.K., MisraM., and DrzalL.T.Sustainable Bio-Composites from Renewable Resources: Opportunities and Challenges in the Green Materials World, J. Polym. Environ., 10(1/2), (2002) 19–26.
2.
d'AlmeidaA.L.F.S., d'AlmeidaJ.R.M., and TemerB.Thermal Analysis Of Pupunha (Bactris gasipaes), Proceedings of the 4th International Conference on Science and Technology of Composite Materials - COMAT2007, 9–12 December, Rio de Janeiro, Brazil. CD-Rom, Paper_131 AP15, 2007.
3.
BacellarR.S., and d'AlmeidaJ.R.M.Mechanical Properties of Pupunha (Bactris gasipaes) Palm, Proceedings of the 9th International Conference on Chemical and Process Engineering, 10–13 May, Rome, Italy. CD-Rom, Paper A120, 2009.
4.
Mora-UrpíJ., WeberJ.C., and ClementC.R.Peach palm, Bactris gasipaes Kunth. Gatersleben/International Plant Genetic Resources Institute, Rome, 1997.
5.
FonsecaE.B.A., MoreiraM.A., and de CarvalhoJ.G.Cultura da pupunheira (Bactris gasipaes Kunth.), Bulletin n.29, Federal University of Lavras, Lavras, Brazil, 2002.
6.
PaciornikS., and MaurícioM.H.P.Digital Imaging, In Vander VoortG. (ed.). ASM Handbook: Metallography and Microstructures, ASM International, Materials Park, pp. 368–402, 2004.
7.
PaciornikS., and d'AlmeidaJ.R.M.Measurement of void content and distribution in composite materials through digital microscopy, J. Comp. Mater., 43(2), (2009) 101–112.
GeorgetD.M.R., CairnsP., SmithA.C., and WaldronK.W.Crystallinity of lyophilised carrot cell wall components, Int. J. Biol. Macromol., 26(5), (1999) 325–331.
10.
RongM.Z., ZhangM.Q., LiuY., YangG.C., and ZengH.M.The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites, Comp. Sci. Technol., 61(10), (2001) 1437–1447.
11.
d'AlmeidaJ.R.M., d'AlmeidaA.L.F.S., de CarvalhoL.H.Mechanical, morphological, and structural characteristics of caroa (Neoglaziovia variegata) fibres, Polym. Polym. Comp., 16(9), (2008) 589–595.
12.
TserkiV., ZafeiropoulosN.E., SimonF., and PanayiotouC.A study of the effect of acetylation and propionylation surface treatments on natural fibres, Comp. Part A., 36(8), (2005) 1110–1118.
13.
RevolJ.F., DietrichA., GoringD.A.I.Effect of mercerization on the crystallite size and crystallinity index in cellulose from different sources, Can. J. Chem., 65(8), (1987) 1724–1725.
14.
AngeliniL.G., LazzeriA., LevitaG., FontanelliD., and BozziC.Ramie (Boehmeria nivea (L.) Gaud.) and Spanish Broom (Spartium junceum L.) fibres for composite materials: agronomical aspects, morphology and mechanical properties, Ind. Crops Prod., 11(2–3), (2000) 145–161.
15.
WangW.-M., CaiZ.-S., YuJ.-Y., and XiaZ.-P.Changes in Composition, Structure, and Properties of Jute Fibers after Chemical Treatments, Fibers and Polym., 10(6), (2009) 776–780.
16.
BismarckA., MohantyA.K., Aranberri-AskargortaI., CzaplaS., MisraM., HinrichsenG., and SpringerJ.Surface characterization of natural fibers; surface properties and the water up-take behavior of modified sisal and coir fibers, Green Chem., 3(2), (2001) 100–107.
17.
d'AlmeidaA.L.F.S., BarretoD.W., CaladoV., and d'AlmeidaJ.R.M.Thermal analysis of less common lignocellulose fibers, J. Therm. Anal. Calorim., 91(2), (2008) 405–408.
18.
DaudW.M.A.W., AliW.S.W., and SulaimanM.Z.The effects of carbonization temperature on pore development in palm-shell-based activated carbon, Carbon, 38(14), (2000) 1925–1932.
19.
d'AlmeidaJ.R.M., AquinoR.C.M.P., and MonteiroS.N.Tensile mechanical properties, morphological aspects and chemical characterization of piassava (Attalea funifera) fibers, Comp. Part A, 37(9), (2006) 1473–1479.
20.
DasM., and ChakrabartyD.Thermogravimetric analysis and weathering study by water immersion of alkali treated bamboo strips, Bioresour., 3(4), (2008) 1051–1062.
21.
d'AlmeidaA.L.F.S., MaurícioM.H.P., and d'AlmeidaJ.R.M.Mechanical, thermal and microstructural analysis of the bamboo Dendrocalamus giganteus, J. Bamboo and Rattan, Accepted.
22.
WielageB., LampkeTh., MarxG., NestlerK., and StarkeD.Thermogravimetric and differential scanning calorimetric analysis of natural fibres and polypropylene, Thermochim. Acta., 337(1–2), (1999) 169–177.
23.
NairK.C.M., ThomasS., and GroeninckxG.Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres, Comp. Sci. Technol., 61(16), (2001) 2519–2529.
24.
RamiahM.V.Thermogravimetric and differential thermal analysis of cellulose, hemicellulose, and lignin, J. Appl. Polym. Sci., 14(5), (1970) 1323–1337.
25.
Kifani-SahbanF., BelkbirL., and ZoulalianA.Etude de la pyrolyse lente de l'Eucalyptus marocain par analyse thermique, Thermochim. Acta., 284(2), (1996) 341–349.
26.
ÓrfãoJ.J.M., AntunesF.J.A., and FigueiredoJ.L.Pyrolysis kinetics of lignocellulosic materials – three independent reactions model, Fuel, 78(3), (1999) 349–358.
27.
SchniewindA.P.Mechanical behavior and properties of wood. In: WangaardF.F. (Ed.), Wood: its structure and properties. Forest Products Laboratory, Madison, pp. 233–270, 1979.
28.
RaveendranK., GaneshA., and KhilarK.C.Pyrolisis characteristics of biomass and biomass components, Fuel, 75(8), (1996) 987–998.
29.
DasS., SahaA.K., ChoudhuryP.H., BasakR.K., MitraB.C., ToddT., LangS., and RowellR.M.Effect of steam pretreatment of jute fiber on dimensional stability of jute composite, J. Appl. Polym. Sci., 76(11), (2000) 1652–1661.
30.
GreenD.W., WinandyJ.E., and KretschmannD.E.Mechanical properties of wood. In: Wood Handbook.Madison, WI: Forest Product Society, Chapter 4, 1999.
31.
DiasF.M., and LahrF.A.R.Strength and stiffness properties of wood estimated through the specific gravity, Sci. Forestalis, 65(1), (2004) 102–113.
32.
ChacónY.G., PaciornikS., and d'AlmeidaJ.R.M.Microstructural evaluation, and flexural mechanical behavior of pultruded glass fiber composites.Submitted.
33.
LapoL.E.R., and BeraldoA.L.Pasted bamboo laminate (PBL), Rev. Agro. Meio Amb., 1(2), (2008) 165–177.
34.
LoT.Y., CuiH.Z., TangP.W.C., and LeungH.C.Strength analysis of bamboo by microscopic investigation of bamboo fibre, Construct. Build. Mater., 22(7), (2008) 1532–1535.
35.
OliveiraA.K.F.Physico-mechanical characterization of adhesively bonded bamboo laminates. MsC Dissertation, Universidade Federal de Campina Grande, Brazil. (in Portuguese), 2005.
36.
DwivediU.K., and ChandN.Influence of Fibre Orientation on Friction and Sliding Wear Behaviour of Jute Fibre Reinforced Polyester Composite, Appl. Compos. Mater., 16(2) (2009) 93–100.
37.
KonnerthJ., GindlW., HarmM., and MüllerU.Comparing dry bond strength of spruce and beech wood glued with different adhesives by means of scarf-and lap joint testing method, Holz als Roh- und Werkstoff, 64(4), (2006) 269–271.
38.
WescottJ.M., BirkelandM.J., TraskaA.E., FrihartC.R., and DallyB.N.New method for rapid testing of bond strength for wood adhesives.Proceedings of the 30th Annual Meeting of the Adhesion Society, February 18–21, 2007, Tampa Bay, FL., pp. 219–221, 2007.
