Design and development of a self-supported polymer electrolyte fuel cell system with anodic dead-end operation

Abstract

Design and operational details for a self-supported polymer electrolyte fuel cell (PEFC) system with anodic dead-end fuel supply and internally humidified cathodic oxidant flow are described. During the PEFC operation, nitrogen and water back diffuse across the Nafion membrane from the cathode to the anode and accumulate in the anode flow channels affecting stack performance. The accumulated inert species are flushed from the stack by purging the fuel cell stack with a timer-activated purge valve to address the aforesaid problem. To minimize the system complexity, stack is designed in such a way that all the inert species accumulate in only one cell called the purge cell. A pulsed purge sequence comprises opening the valve for purge duration followed by purge-valve closing for the hold period and repeating the sequence in cycles. Since self-humidification is inadequate to keep the membrane wet, the anodic dead-end-operated PEFC stack with composite membrane comprising perflourosulphonic acid (Nafion) and silica is employed for keeping the membrane humidified even while operating the stack with dry hydrogen and internally humidified air.

Keywords

polymer electrolyte fuel cell dead-end self-supported purge sequence composite membrane self-humidification

Get full access to this article

View all access options for this article.

References

Büchi

F. N.

Vielstich

Lamm

Gasteiger

H. A.

Eds., ‘Small-size PEM systems for special applications’ Handbook of fuel cells fundamentals, technology and applications (Chichester, UK: John Wiley & Sons Ltd. 2003): pp. 1152–1161. Ch. 83.

Lee

Jang

Y. H.

Jung

Chung

J. T.

Kim

, ‘Performance characteristics of a polymer electrolyte fuel cell with the anodic supply mode’ ECS Trans. 3 (2002): 871–878.

Ahluwalia

R. K.

Wang

, ‘Buildup of nitrogen in direct hydrogen polymer electrolyte fuel cell stacks’ J. Power Sources 171 (2002): 63–71.

Yoshioka

Yoshimura

Fukumoto

Hirori

Yoshiyasu

, ‘Development of PEFC under low humidified conditions’ J. Power Sources 144 (2002): 146–151.

Giddey

Ciacchi

F. T.

Badwal

S. P. S.

, ‘Design, assembly and operation of polymer electrolyte membrane fuel cell stacks to 1 kWe capacity’ J. Power Sources 125 (2002): 155–165.

Jer-Huan

Han-Chieh

Wei-Mon

Wei-Lian

, ‘Effects of operating conditions on the performances of individual cell and stack of PEM fuel cell’ J. Power Sources 180 (2002): 476–483.

Urbani

Barbera

Giacoppo

Squadrito

Passalacqua

, ‘Effect of operative conditions on a PEFC stack performance’ Int. J. Hydrog. Energy 33 (2002): 3137–3141.

St-Pierre

Wilkinson

D. P.

Knights

Bos

, ‘Relationships between water management, contamination and lifetime degradation in PEFC’ J. New Mater. Electrochem. Syst. 3 (2002): 99–106.

Susai

Kawakami

Hamada

Miyake

Azegami

, ‘Development of a 1 kW power source’ J. Power Sources 92 (2002): 131–138.

10.

Knobbe

M. W.

Chong

P. Y.

Nguyen

T. V.

, ‘Active gas management for PEM fuel cell stacks’ J. Power Sources 138 (2002): 94–100.

11.

Karimi

Baschuk

J. J.

, ‘Performance analysis and optimization of PEM fuel cell stacks using flow network approach’ J. Power Sources 147 (2002): 162–177.

12.

Buchi

F. N.

Srinivasan

, ‘Operating proton exchange membrane fuel cells without external humidification of the reactant gases’ J. Electrochem. Soc. 144 (1991): 2767–2772.

13.

Hikita

Nakatani

Yamane

Takagi

, ‘Power-generation characteristics of hydrogen fuel cell with dead-end system’ JSAE Rev. 23 (2002): 177–182.

14.

Himanen

Hottinen

Tuurala

, ‘Operation of a planar free-breathing PEMFC in a dead-end mode’ Electrochem. Commun. 9 (2002): 891–894.

15.

Siegel

J. B.

McKay

D. A.

Stefanopoulou

A. G.

Hussey

D. S.

Jacobson

D. L.

, ‘Measurement of liquid water accumulation in a PEMFC with dead-ended anode’ J. Electrochem. Soc. 155 (2002): B1168–B1178.

16.

Siegel

J. B.

Bohac

S. V.

Stefanopoulou

A. G.

Yesilyurt

, ‘Nitrogen front evolution in purged polymer electrolyte membrane fuel cell with dead-ended anode’ J. Electrochem. Soc. 157 (2012): B1081–B1093.

17.

Yoshio

Jun

Keiichi

, ‘Energy balance and stack performance of 1 kW class PEFC’ ECS Trans. 16 (2002): 181–190.

18.

Wenhua

H. Z.

Robert

U. P.

Donald

R. C.

Bruce

J. T.

, ‘Uniformity analysis at MEA and stack levels for a Nexa PEM fuel cell system’ J. Power Sources 128 (2002): 231–238.

19.

Wenhua

H. Z.

Robert

U. P.

Bruce

J. T.

, ‘Critical flow rate of anode fuel exhaust in a PEM fuel cell system’ J. Power Sources 156 (2002): 512–519.

20.

Young-Jun

Gu-Gon

Tae-Hyun

Young-Gi

Won-Yong

Sung-Dae

Chang-Soo

, ‘Operating characteristics of an air-cooling PEMFC for portable applications’ J. Power Sources 145 (2002): 604–609.

21.

Eckl

Zehtner

Leu

Wagner

, ‘Experimental analysis of water management in a self-humidifying polymer electrolyte fuel cell stack’ J. Power Sources 138 (2002): 137–144.

22.

Kocha

S. S.

Yang

J. D.

J. S.

, ‘Characterization of gas crossover and its implications in PEM fuel cells’ AIChE J. 52 (2002):1925–1916.

23.

Dumercy

Péra

M.-C.

Glises

Hissel

Hamandi

Badin

Kauffmann

J.-M.

, ‘PEFC stack operating in anodic dead end mode’ Fuel Cells 4 (2002): 352–357.

24.

Mench

M. M.

, Fuel cell engines (New Jersey, USA: John Wiley & Sons Inc. 2008): 296–298.

25.

Sahu

A. K.

Selvarani

Pitchumani

Sridhar

Shukla

A. K.

, ‘A sol-gel modified alternative Nafion-Silica composite membrane for polymer electrolyte fuel cells’ J. Electrochem. Soc. 154 (2002): B123–B132.

26.

Summers

D. A.

Hass

H. R.

, Methods of operating fuel cells having closed reactant supply systems (2006) US Patent 7153598.

27.

Barton

R. H.

Uong

T. D.

Schembri

C. J.

Skinner

G. A.

, Fuel cell purging method and apparatus (2005) US Patent 6 960 401 B2.