Numerical study on the effect of the frequency and amplitude of the tool on the material removal rate in ultrasonic-assisted electrical discharge machining
Free accessResearch articleFirst published online March, 2011
Numerical study on the effect of the frequency and amplitude of the tool on the material removal rate in ultrasonic-assisted electrical discharge machining
This paper investigates the effects on the rate of material removal of the frequency and amplitude of the ultrasonic vibration of the tool used in ultrasonic-assisted electrical discharge machining. It is shown that increases in the amplitude and frequency of the tool vibration increase the rate of pressure drop inside the bubble and consequently increase the rate of pressure drop on the surface of the workpiece. The latter facilitates the escape of the molten material from the crater and consequently increases the rate of material removal from the workpiece.
StruttJ. W., ‘On the pressure developed in a liquid during collapse of a spherical void’Phil. Mag.34 (1911): 94–98.
4.
BestJ. P., The dynamics of underwater explosions (1991) PhD Thesis, Department of Mathematics, University of Wollongong, Wollongong, Australia.
5.
Shervani-TabarM. T., Computer study of a cavity bubble near a rigid boundary, a free surface, and a compliant wall (1995) PhD Thesis, Department of Mechanical Engineering, University of Wollongong, Wollongong, Australia.
6.
Shervani-TabarM. T.AbdullahA.ShabgardM. R., ‘Numerical study on the dynamics of an electrical discharge generated bubble in EDM’Engng Anal. Bound. Elem.30 (2002): 503–514.
7.
KremerD.LhiaubetC.MoisanA., ‘A study of the effect of synchronizing ultrasonic vibrations with pulses in EDM’Ann. CIRP40 (1) (1991): 211–215.
8.
Shervani-TabarM. T.AbdullahA.ShabgardM. R., ‘Numerical and experimental study on the effect of vibration of the tool in ultrasonic assisted EDM’Int. J. Adv. Mfg Technol.32 (7–8) (2007): 719–731.
9.
AbdullahA.ShabgardM. R., ‘Effect of ultrasonic vibration of tool on electrical discharge machining of cemented tungsten carbide (WC-Co)’Int. J. Adv. Mfg Technol.38 (2002): 1137–1147 DOI: 100.1007/s00170-007-1168-8.
