Abstract
Category:
Ankle
Introduction/Purpose:
Knowledge of cartilage pressure distribution in healthy ankle joints during gait is important for understanding the loading environment of articular cartilage and for providing a basis for comparison to evaluate how ankle pathology and surgical procedures affect cartilage loading. Finite element models of the ankle have been developed to examine in vitro loads at the tibiotalar joint during simulated standing in healthy and injured ankle joints [1, 2]. However, there are currently no in vivo studies of tibiotalar cartilage pressure during dynamic loading activities. The goal of this study was to develop a subject-specific finite element model of the tibiotalar joint to estimate contact pressure during walking and running.
Methods:
Informed consent was obtained from one healthy male, age 23 yrs., BMI 27 kg/m2). Synchronized biplane radiographs of the ankle were acquired at 100 and 150 frames per second during the support phase of overground walking and running, respectively, at a self-selected pace (1.5 m/s and 3.0 m/s, respectively). CT-based bone models of the tibia and talus were matched to the stereoradiographic images to precisely track the three-dimensional bone movement [3]. Six degrees-of-freedom joint kinematics were calculated for each bone model, and used to position bone models in the finite element analysis. Cartilage volumes for the distal tibia and proximal talus were created in Geomagic software by extruding the articulating bone surface. Bones were modeled as rigid bodies and cartilage was modeled as deformable bodies with uniform thickness of 1.3 mm [4-7]. Simulations were performed using FEBio software. The primary outcome parameter was peak cartilage pressure in the tibiotalar joint.
Results:
On average, peak tibiotalar cartilage pressure was approximately 25% greater during the midstance phase of running in comparison to walking (Figure 1). During walking, peak contact pressure occurred on the lateral-central region of the tibiotalar cartilage throughout the entire stance phase. During the early support phase of running, the location of peak contact pressure was also on the lateral-central region of the tibiotalar cartilage. During running push-off, pressure increased in the medial-central cartilage region and the overall peak cartilage pressure increased.
Conclusion:
A novel finding of this study is that the peak pressure in tibiotalar cartilage moves from the lateral to medial side of the joint during running, but remains on the lateral side throughout the support phase of walking. This suggests that the location and magnitude of the loads seen by tibiotalar joint cartilage are activity dependent, even in the healthy ankle joint. Future work will investigate cartilage loading in pathologic ankles before and after surgical intervention, as well as during other common athletic activities.