Micro-electrical discharge machining (micro-EDM) is a widely used technique for producing complex geometries with high precision in metals, including nitinol (NiTi) alloys. This review provides insights into the process parameters, electrode material, and surface integrity for the micro-EDM of NiTi. The pulse duration, pulse frequency, and discharge current are critical parameters that affect the machining performance of NiTi. Copper-tungsten and tungsten carbide are commonly used electrode materials for micro-EDM of NiTi. The surface integrity of the machined surface is an essential consideration for biomedical applications. There is a pressing need for the investigation of the microstructure and phase transformation of NiTi after micro-EDM to understand the influence of machining on the material properties. This review provides valuable information for researchers and engineers to optimize the machining performance and improve the material properties of NiTi for biomedical applications.
SzoldA.Nitinol: shape-memory and super-elastic materials in surgery. Surg Endosc Other Interv Tech2006; 20(9): 1493–1496. doi: 10.1007/s00464-005-0867-1
2.
MuralidharanB, PrabuK and RajamuruganG.Pulsed Nd: YAG laser machining of nitinol: an experimental investigation. J Micromanuf2022; 5(2): 144–148. doi: 10.1177/25165984211015482
3.
ShandilyaP, BisariaH. and JainPK.Parametric study on the recast layer during EDWC of a Ni-rich NiTi shape memory alloy. J Micromanuf2018; 1(2): 134–141. doi: 10.1177/2516598418766934
4.
SellittoA and RiccioA.Overview and future advanced engineering applications for morphing surfaces by shape memory alloy materials. Materials (Basel)2019; 12(5): 708. doi: 10.3390/ma12050708
5.
HauCT, GouwandaD, GopalaiAA, . Gamification and control of nitinol based ankle rehabilitation robot. Biomimetics2021; 6(3): 53. doi: 10.3390/biomimetics6030053
6.
TahaOMA, BahromMB, TahaOY, . Experimental study on two way shape memory effect training procedure for nitinol shape memory alloy. ARPN J Eng Appl Sci2015; 10(17): 7847–7851.
7.
PeltonAR, DuerigTW and StöckelD.A guide to shape memory and superelasticity in Nitinol medical devices. Minim Invasive Ther Allied Technol2004; 13(4): 218–221. doi: 10.1080/13645700410017236
8.
GopalakrishnanT, ChandrasekaranM, SaravananR, . An ample review on compatibility and competence of shape memory alloys for enhancing composites. Adv Mater Sci Eng2022; 2022: 6988731. doi: 10.1155/2022/6988731
9.
WeaverJD, SenaGM, AycockKI, . Rotary bend fatigue of nitinol to one billion cycles. Shape Mem Superelasticity2023; 9: 50–73. doi: 10.1007/s40830-022-00409-7
10.
TomyA and HiremathSS.An experimental investigation and multi-objective optimization of abrasive jet machining on Ti-6Al-4V ELI bio-material. J Micromanuf2023; 6(1): 50–59. doi: 10.1177/25165984221139615
11.
GangadharTG., ManickavelanK, and SinghB.Analysis of fatigue behaviour of superelastic nitinol wires. EIJST2015; 4: 7–18.
12.
FragnitoM and VetrellaS.A space release/deployment system actuated by shape memory wires. Acta Astronaut2002; 51(11): 761–770. doi: 10.1016/S0094-5765(02)00027-9
13.
GuoY, KlinkA, FuC, . Machinability and surface integrity of Nitinol shape memory alloy. CIRP Ann2013; 62(1): 83–86. doi: 10.1016/j.cirp.2013.03.004
14.
ThayerTA, BagbyMD, MooreRN, . X-ray diffraction of nitinol orthodontic arch wires. Am J Orthod Dentofac Orthop1995; 107(6): 604–612. doi: 10.1016/s0889-5406(95)70103-6
15.
ShabalovskayaSA.Surface, corrosion and biocompatibility aspects of Nitinol as an implant material. Biomed Mater Eng2002; 12(1): 69–109.
16.
MaleckisK, AnttilaE, AylwardP, . Nitinol stents in the femoropopliteal artery: a mechanical perspective on material, design, and performance. Ann Biomed Eng2018; 46(5): 684–704. doi: 10.1007/s10439-018-1990-1
17.
WadehraV, BuxtonAE, AntoniadisAP, . The use of a novel nitinol guidewire to facilitate transseptal puncture and left atrial catheterization for catheter ablation procedures. Europace2011; 13(10): 1401–1405. doi: 10.1093/europace/eur155
18.
ContiM, De BeuleM, MortierP, . Nitinol embolic protection filters: design investigation by finite element analysis. J Mater Eng Perform2009; 18(5–6): 787–792. doi: 10.1007/s11665-009-9408-8
19.
StoeckelD.Nitinol medical devices and implants. Minim Invasive Ther Allied Technol2000; 9(2): 81–88. doi: 10.3109/13645700009063054
20.
NagarajaS., SenaG., StaffordP, . Effects of nitinol microstructural purity on localized and uniform corrosion susceptibility. Shape Mem Superelasticity2022; 8(2): 118–128. doi: 10.1007/s40830-022-00366-1
21.
BesekarN and BhattacharyyaB.Influence of energy input parameters on wire feed rate and surface characteristics during WECM of Nitinol SMA. J Micromanuf2023; 25165984231151303. doi: 10.1177/25165984231151303
22.
BainsPS, MahajanR, SidhuSS, . Experimental investigation of abrasive assisted hybrid EDM of Ti-6Al-4V. J Micromanuf2019; 2(2): 123–132. doi: 10.1177/2516598419833498
23.
ChakrabortyS, DeyV and GhoshSK.A review on the use of dielectric fluids and their effects in electrical discharge machining characteristics. Precis Eng2015; 40: 1–6. doi: 10.1016/j.precisioneng.2014.11.003
24.
DasGS, VossG, JarvisG, . Experimental atrial septal defect closure with a new, transcatheter, self-centering device. Circulation1993; 88(4 Pt. 1): 1754–1764. doi: 10.1161/01.cir.88.4.1754
25.
DuerigT, PeltonA and StöckelD.An overview of nitinol medical applications. Mater Sci Eng A1999; 273–275: 149–160. doi: 10.1016/S0921-5093(99)00294-4
26.
SahooR, KumarD, SinghNK, . Fabrication of micro-hole using novel Maglev EDM. J Micromanuf2022; 25165984221129449. https://doi.org/10.1177/25165984221129449
27.
KotlapatiA and HiremathSS.Machinability and parametric optimization of aluminum silicon carbide metal matrix composite (Al-SiC MMC) machined through µ-EDM. J Micromanuf2022; 25165984221123196, https://doi.org/10.1177/25165984221123196
28.
KlockeF, SchwadeM, KlinkA, . EDM machining capabilities of magnesium (Mg) alloy WE43 for medical applications. Procedia Eng2011; 19: 190–195. doi: 10.1016/j.proeng.2011.11.100
29.
PradhanMK, KumarA and JainVK (eds). Introduction to Micromachining. New Delhi:Narosa Publishing House, 2014, pp. 624. $43.12 (Paperback)
30.
HoangKT and YangS-H.A new approach for micro-WEDM control based on real-time estimation of material removal rate. Int J Precis Eng Manuf2015; 16(2): 241–246. doi: 10.1007/s12541-015-0032-2
31.
HoangKT and YangSH.A study on the effect of different vibration-assisted methods in micro-WEDM. J Mater Process Technol2013; 213(9): 1616–1622. doi: 10.1016/j.jmatprotec.2013.03.025
32.
MosesM-D and JahanMP.Micro-EDM machinability of difficult-to-cut Ti-6Al-4V against soft brass. Int J Adv Manuf Technol2015; 81(5–8): 1345–1361. doi: 10.1007/s00170-015-7306-9
33.
GudipudiS, NagamuthuS, SubbianKS, . A comprehensive investigation on machining of composites by EDM for microfeatures and surface integrity. J Micromanuf2022; 5(1): 5–20. doi: 10.1177/25165984211063308
34.
SinghM, JainVK and RamkumarJ.Micro-texturing on flat and cylindrical surfaces using electric discharge micromachining. J Micromanuf2021; 4(2): 127–137. doi: 10.1177/2516598420980404
SarmaP and PatowariPK.Fabrication of metallic micromixers using WEDM and EDM for application in microfluidic devices and circuitries. Micro Nanosyst2018; 10(2): 137–147. doi: 10.2174/1876402911666181128125409
37.
PiraniC, IaconoF, GeneraliL, . HyFlex EDM: superficial features, metallurgical analysis and fatigue resistance of innovative electro discharge machined NiTi rotary instruments. Int Endod J2016; 49(5): 483–493. doi: 10.1111/iej.12470
38.
Umar FarooqM, Pervez MughalM, AhmedN, . On the investigation of surface integrity of Ti6Al4V ELI using Si-mixed electric discharge machining. Materials (Basel)2020; 13(7): 1549. doi: 10.3390/ma13071549
39.
GadallaAM and BozkurtB.Expanding heat source model for thermal spalling of TiB2 in electrical discharge machining. J Mater Res1992; 7(10): 2853–2858. doi: 10.1557/JMR.1992.2853
40.
FengCC, LiL, ZhangCS, . Surface characteristics and hydrophobicity of Ni-Ti alloy through magnetic mixed electrical discharge machining. Materials (Basel)2019; 12(3): 388. doi: 10.3390/ma12030388.
41.
WanYL, LianZX, LouJ, . Fabrication and coupling mechanism of Super-hydrophobical aluminium alloy surface. China Surf Eng2014; 27: 112–116.
42.
WanY, XuL and YuH.Fabrication of superhydrophobic aluminium alloy surface by twice nanosecond laser scanning. Micro Nano Lett2018; 13(4): 469–472. doi: 10.1049/mnl.2017.0505
43.
LiuW, LuoY, SunL, . Fabrication of the superhydrophobic surface on aluminum alloy by anodizing and polymeric coating. Appl Surf Sci2013; 264: 872–878. doi: 10.1016/j.apsusc.2012.10.167
44.
WanY, LiuZ, DongB, . Orthogonal experiment on super-hydrophobic aluminum surface by high-speed wire electrical discharge machining. In: 2016 IEEE international conference on mechatronics and automation, Harbin, China, 7–10 August 2016, pp. 1876–1880. Piscataway, NJ: IEEE.
45.
LiC, XuX, LiY, . Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy. J Alloys Compd2019; 783: 95–102. doi: 10.1016/j.jallcom.2018.12.283
46.
TanPC and YeoSH.Modeling of recast layer in micro-electrical discharge machining. J Manuf Sci Eng2010;132(3): 031001. https://doi.org/10.1115/1.4001480
47.
ZhuZ, GuoD, XuJ, . Processing characteristics of micro electrical discharge machining for surface modification of TiNi shape memory alloys using a TiC powder dielectric. Micromachines2020; 11(11): 1018. doi: 10.3390/mi11111018
48.
AlidoostiA, Ghafari-NazariA, MoztarzadehF, . Electrical discharge machining characteristics of nickel-titanium shape memory alloy based on full factorial design. J Intell Mater Syst Struct2013; 24(13): 1546–1556. doi: 10.1177/1045389X13476147
49.
SamuelMP and PhilipPK.Power metallurgy tool electrodes for electrical discharge machining. Int J Mach Tools Manuf1997; 37(11): 1625–1633. doi: 10.1016/S0890-6955(97)00006-0
50.
DaveK V and PatelDS.Influence of electrode geometry and process parameters on surface quality and MRR in electrical discharge machining (EDM) of AISI H13. Int J Eng Res Appl2012; 2: 1498–1505.
51.
AbhilashPM and ChakradharD.Image processing algorithm for detection, quantification and classification of microdefects in wire electric discharge machined precision finish cut surfaces. J Micromanuf2022; 5(2): 116–126. doi: 10.1177/25165984211015410
52.
SinghR, DurejaJS, DograM, . Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy. Tribol Int2020; 145: 106183. doi: 10.1016/j.triboint.2020.106183
53.
GaoQ.Impact of electrode length on EDM inclined hole drilling process. Int J Adv Manuf Technol2018; 94(1–4): 1171–1175. doi: 10.1007/s00170-017-0937-2
54.
MishraDK, DattaS and MasantaM.Effects of tool electrode on EDM performance of Ti-6Al-4V. Silicon2018; 10(5): 2263–2277. doi: 10.1007/s12633-018-9760-0
55.
GopalakannanS and SenthilvelanT.Effect of electrode materials on electric discharge machining of 316 L and 17-4 PH stainless steels. J Miner Mater Charact Eng2012; 11(7): 685–690. doi: 10.4236/jmmce.2012.117053
56.
TsaiHC, YanBH and HuangFY.EDM performance of Cr/Cu-based composite electrodes. Int J Mach Tools Manuf2003; 43(3): 245–252. doi: 10.1016/S0890-6955(02)00238-9
57.
PecasP and HenriquesE.Electrical discharge machining using simple and powder-mixed dielectric: the effect of the electrode area in the surface roughness and topography. J Mater Process Technol2008; 200(1–3): 250–258. doi: 10.1016/j.jmatprotec.2007.09.051
58.
BarenjiRV, PouraslHH and KhojastehnezhadVM.Electrical discharge machining of the AISI D6 tool steel: prediction and modeling of the material removal rate and tool wear ratio. Precis Eng2016; 45: 435–444. doi: 10.1016/j.precisioneng.2016.01.012
59.
AbdulkareemS, KhanAA and KonnehM.Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining. Int J Adv Manuf Technol2009; 45(11–12): 1146–1151. doi: 10.1007/s00170-009-2060-5
60.
KhanAA, AliMY and HaqueMM.A study of electrode shape configuration on the performance of die sinking EDM. Int J Mech Mater Eng2009; 4: 19–23.
61.
ErdenA.Effect of materials on the mechanism of electric discharge machining (EDM). J Eng Mater Technol1983; 105(2): 132–138. doi: 10.1115/1.3225627
62.
LiuQ, ZhangQ, ZhuG, . Effect of electrode size on the performances of micro-EDM. Mater Manuf Process2016; 31(4): 391–396. doi: 10.1080/10426914.2015.1059448
63.
SinghR, SinghRP and TrehanR.State of the art in processing of shape memory alloys with electrical discharge machining: a review. Proc Inst Mech Eng Part B J Eng Manuf2021; 235(3): 333–366. doi: 10.1177/0954405420958771
64.
DavisR, SinghA, DebnathK, . Surface modification of medical-grade Ni55. 6Ti44. 4 alloy via enhanced machining characteristics of Zn powder mixed-µ-EDM. Surf Coat Technol2021; 425: 127725. doi: 10.1016/j.surfcoat.2021.127725
65.
JahanMP, KakavandP and AlaviF.A comparative study on micro-electro-discharge-machined surface characteristics of Ni-Ti and Ti-6Al-4V with respect to biocompatibility. Procedia Manuf2017; 10: 232–242. doi: 10.1016/j.promfg.2017.07.051
66.
IshfaqK, MaqsoodMA and MahmoodMA.Machining characteristics of various powder-based additives, dielectrics, and electrodes during EDM of micro-impressions: a comparative study. Int J Adv Manuf Technol2022; 123(5–6): 1521–1541. doi: 10.1007/s00170-022-10254-8
67.
DavisR, SinghA, DebnathK, . Effect of powder particle concentration and tool electrode material amid zinc powder-mixed µEDM of biocompatible Mg alloy AZ91D. J Mater Eng Perform2021; 30(8): 5704–5718. doi: 10.1007/s11665-021-05788-z
68.
JahanMP, RahmanM and WongYS.Study on the nano-powder-mixed sinking and milling micro-EDM of WC-Co. Int J Adv Manuf Technol2011; 53: 167–180. doi: 10.1007/s00170-010-2826-9
69.
GhoshG, SidparaA and BandyopadhyayPP.Review of several precision finishing processes for optics manufacturing. J Micromanuf2018; 1(2): 170–188. doi: 10.1177/2516598418777315
70.
YaoZ, KaneCL and DekkerC.High-field electrical transport in single-wall carbon nanotubes. Phys Rev Lett2000; 84(13): 2941–2944. doi: 10.1103/PhysRevLett.84.2941
YuM-F, LourieO, DyerMJ, . Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science2000; 287(5453): 637–640. doi: 10.1126/science.287.5453.637
73.
XiaK, ZhanH and GuY.Graphene and carbon nanotube hybrid structure: a review. Procedia IUTAM2017; 21: 94–101. doi: 10.1016/j.piutam.2017.03.042
74.
OthmanAM and ElsayedAM.Carbon Nanotubes for Environmental Remediation Applications. In: AbrahamJ, ThomasS and KalarikkalN (eds) Handbook of Carbon Nanotubes. Cham:Springer, 2021, pp. 1–30.
75.
VeemanD, ShreeMV, SureshkumarP, . Sustainable development of carbon nanocomposites: synthesis and classification for environmental remediation. J Nanomater2021; 2021: 1–21. doi: 10.1155/2021/5840645
76.
VoraJ, KhannaS, ChaudhariR, . Machining parameter optimization and experimental investigations of nano-graphene mixed electrical discharge machining of nitinol shape memory alloy. J Mater Res Technol2022; 19: 653–668. doi: 10.1016/j.jmrt.2022.05.076
77.
ChaudhariR, KhannaS, VoraJ, . Experimental investigations and optimization of MWCNTs-mixed WEDM process parameters of nitinol shape memory alloy. J Mater Res Technol2021; 15: 2152–2169. doi: 10.1016/j.jmrt.2021.09.038
78.
ShouW, MahajanBK, LudwigB, . Low-cost manufacturing of bioresorbable conductors by evaporation–condensation‐mediated laser printing and sintering of Zn nanoparticles. Adv Mater 2017; 29(26): 1700172. doi: 10.1002/adma.201700172
79.
AugustyniakAW, SucheckiTT and KumazawaH.Reactivity of nano-size zinc powder in the aqueous solution of [FeIII (edta)(H2O)]. Environ Technol2017; 38(1): 103–107. doi: 10.1080/09593330.2016.1186745
80.
MaQ, WangL, SunW, . Effect of chemical conversion induced by self-corrosion of zinc powders on enhancing corrosion protection performance of zinc-rich coatings. Corros Sci2022; 194: 109942. doi: 10.1016/j.corsci.2021.109942
81.
VathsalaK and VenkateshaTV.Zn–ZrO2 nanocomposite coatings: elecrodeposition and evaluation of corrosion resistance. Appl Surf Sci2011; 257(21): 8929–8936. doi: 10.1016/j.apsusc.2011.05.067
82.
AliZ, ChaSN, SohnJI, . Design and evaluation of novel Zn doped mesoporous TiO 2 based anode material for advanced lithium ion batteries. J Mater Chem2012; 22(34): 17625–17629. doi: 10.1039/c2jm33315e
83.
MeiX, ZhengH and OuyangJ.Ultrafast reduction of graphene oxide with Zn powder in neutral and alkaline solutions at room temperature promoted by the formation of metal complexes. J Mater Chem2012; 22(18): 9109–9116. doi: 10.1039/c2jm30552f
84.
TallaG, GangopadhayayS and BiswasCK.State of the art in powder-mixed electric discharge machining: a review. Proc Inst Mech Eng Part B J Eng Manuf2017; 231(14): 2511–2526. doi: 10.1177/0954405416634265
85.
LiuJF and GuoYB.Process capability of wire-EDM of NiTi shape memory alloy at main cut and trim cut modes. Procedia Manuf2015; 1: 904–914. doi: 10.1016/j.promfg.2015.09.083
86.
SullivanSJL, DreherML, ZhengJ, . Effects of oxide layer composition and radial compression on nickel release in nitinol stents. Shape Mem Superelasticity2015; 1(3): 319–327. doi: 10.1007/s40830-015-0028-x
87.
OleshkoO, HusakY, KorniienkoV, . Biocompatibility and antibacterial properties of zno-incorporated anodic oxide coatings on TiZrNb alloy. Nanomaterials (Basel) 2020; 10(12): 2401. doi: 10.3390/nano10122401
88.
LiuJ, LiuJ, AttarilarS, . Nano-modified titanium implant materials: a way toward improved antibacterial properties. Front Bioeng Biotechnol2020; 8: 576969. doi: 10.3389/fbioe.2020.576969
89.
SchubertM, LeupoldN, ExnerJ, . High-temperature electrical insulation behavior of alumina films prepared at room temperature by aerosol deposition and influence of annealing process and powder impurities. J Therm Spray Technol2018; 27(5): 870–879. doi: 10.1007/s11666-018-0719-x
90.
SharmaP, MishraDK and DixitP.Experimental investigations into alumina ceramic micromachining by electrochemical discharge machining process. Procedia Manuf2020; 48: 244–250. doi: 10.1016/j.promfg.2020.05.044
91.
RamanenkaD, AnttiM-L, GustafssonG, . Characterization of high-alumina refractory bricks and modelling of hot rotary kiln behaviour. Eng Fail Anal2017; 79: 852–864. doi: 10.1016/j.engfailanal.2017.04.038
92.
MamathaS, BiswasP, RamavathP, . 3D printing of complex shaped alumina parts. Ceram Int2018; 44(16): 19278–19281. doi: 10.1016/j.ceramint.2018.07.153
93.
PandeyK and PandeyPM.Use of chemical oxidizers with alumina slurry in double disk magnetic abrasive finishing for improving surface finish of Si (100). J Manuf Process2018; 32: 138–150. doi: 10.1016/j.jmapro.2018.02.007
94.
AlzarrugFA, DimitrijevićMM, HeinemannRMJ, . The use of different alumina fillers for improvement of the mechanical properties of hybrid PMMA composites. Mater Des2015; 86: 575–581. doi: 10.1016/j.matdes.2015.07.069
95.
Al-SanabaniFA, MadfaAA and Al-QudaimiNH.Alumina ceramic for dental applications: a review article. Am J Mater Res2014; 1: 26–34.
96.
GattuSD and YanJ.Micro Electrical discharge machining of ultrafine particle type tungsten carbide using dielectrics mixed with various powders. Micromachines 2022; 13(7): 998. doi: 10.3390/mi13070998
97.
KansalHK, SinghS and KumarP.Effect of silicon powder mixed EDM on machining rate of AISI D2 die steel. J Manuf Process2007; 9(1): 13–22. doi: 10.1016/S1526-6125(07)70104-4
98.
TzengY-F and LeeC-Y.Effects of powder characteristics on electrodischarge machining efficiency. Int J Adv Manuf Technol2001; 17(8): 586–592. doi: 10.1007/s001700170142
99.
DaneshmandS, NeyestanakAAL and MonfaredV.Effects of Al2O3 powder on electro discharge machining process of nickel-titanium shape memory alloy. Optoelectron Adv Mater Rapid Commun2014; 8: 1119–1124.
100.
RajeshA and VenkateshJ.Taguchi method and Pareto ANOVA: an approach for process parameters optimization in micro-EDM drilling. Int J Sci Eng Res2014; 5: 38–42.
101.
KolahanF and Azadi MoghaddamM.The use of Taguchi method with grey relational analysis to optimize the EDM process parameters with multiple quality characteristics. Sci Iran2015; 22: 530–538.
102.
YadavS and VermaRK.Multi Criteria optimization approaches in electric discharge machining. Mater Today Proc2019; 18: 4243–4252. doi: 10.1016/j.matpr.2019.07.382
103.
ShivhareM and McCreathG.Practical considerations for DoE implementation in quality by design. BioProcess Int2010; 8: 22–30.
104.
DaneshmandS, KahriziEF, LotfineyestanakAA, . Optimization of electrical discharge machining parameters for NiTi shape memory alloy by using the Taguchi method. J Mar Sci Technol2014; 22: 506–512.
105.
DaneshmandS, MonfaredV and Lotfi NeyestanakAA.Effect of tool rotational and Al 2 O 3 powder in electro discharge machining characteristics of NiTi-60 shape memory alloy. Silicon2017; 9(2): 273–283. doi: 10.1007/s12633-016-9412-1
106.
AbidiMH, Al-AhmariAM, SiddiqueeAN, . An investigation of the micro-electrical discharge machining of nickel-titanium shape memory alloy using grey relations coupled with principal component analysis. Metals (Basel)2017; 7(11): 486. doi: 10.3390/met7110486
107.
AbidiMH, Al-AhmariAM, UmerU, . Multi-objective optimization of micro-electrical discharge machining of nickel-titanium-based shape memory alloy using MOGA-II. Measurement2018; 125: 336–349. doi: 10.1016/j.measurement.2018.04.096
108.
SahuAK, ChatterjeeS, NayakPK, . Study on effect of t18; 338: 12033. doi: 10.1088/1757-899X/338/1/012033
109.
SahooAK and MishraDR.Multi-response optimization of edm drilling of nitinol submerged in distilled water using gra and taguchi analysis. In: Baskent international conference on multidisciplinary studiesAnkara, Turkey, 2022, pp. 57–73.
