A comprehensive review of powder mixed EDM on powder materials,process & response parameters,technological advancements,challenges and future prospects in precision manufacturing
Restricted accessReview articleFirst published online 2026
A comprehensive review of powder mixed EDM on powder materials,process & response parameters,technological advancements,challenges and future prospects in precision manufacturing
The standard method of EDM (electrical discharge machining) has many benefits through the new application of conductive powders into the dielectric fluid (or dielectric medium), in a hybrid type of machining called PMEDM (powder mixed EDM), which is an emerging hybrid cutting process. PMEDM provides the biggest picture of the characteristics, principles, other indicators of performance, and recent improvements. In addition, a significant number of powder types affect how well a PMEDM process will perform, including aluminum, copper, graphite, and silicon carbide. There are also many interrelated fundamental variables involved in producing electrical discharges that produce the results desired from machining. They include how much powder is mixed with the fluid; what current is used to discharge the fluid; how long the electrical discharge takes to recharge the electrodes; and how far apart the two positive electrodes are when they create their current. The results of these interactions can be seen in the wear on tools, surface finishing, and accuracy of machining. Thus, this article provides an overview of both the fundamental processes and limitations associated with the PMEDM process and gives a thorough overview of the latest technological advancements within this area of research. Ultimately, the PMEDM process has grown to become very important to the future of advanced machining technologies, and this will continue to support other forms of advanced machining technologies that could change the future of precision manufacturing.
SchumacherBM.After 60 years of EDM the discharge process remains still disputed. J Mater Process Technol2004; 149: 376–381.
2.
LazarenkoBR.To invert the effect of wear on electric power contacts. Dissertation, All-Union Institute for Electro Technique, Moscow, 1943.
3.
KansalHK, SinghS and KumarP.Technology and research developments in powder mixed electric discharge machining (PMEDM). J Mater Process Technol2007; 184: 32–41.
PathaniaV and JassalNS.Brief chronological study of the evolution of electrical discharge machining. Int J Sci Res2015; 4(10): 1287–1294.
6.
AtefiR, JavamN, RazmavarA, . The influence of EDM parameters in finishing stage on surface quality, material removal rate and electrode wear rate. Res J Appl Sci Eng Technol2012; 4(10): 1287–1294.
7.
PrabhuS and VinayagamBK.Analysis of surface characteristics of AISI D2 tool steel material using electric discharge machining process with single-wall carbon nanotubes. Int J Eng Technol2010; 2: 35–41.
8.
GuuYH, HochengH, TaiNH, . Effect of electrical discharge machining on the characteristics of carbon fibre reinforced carbon composites. J Mater Sci2001; 36: 2037–2043.
9.
KaoJY.Optimization of the EDM parameters on machining Ti-6Al-4V with multiple quality characteristics. Int J Adv Manuf Technol2010; 47: 395–402.
10.
MeenaVK and AzadMS.Grey relational analysis of micro-electrical discharge machining of Ti-6Al-4V alloy. Mater Manuf Process2012; 27: 973–977.
11.
TakinoH and HanF.Cutting of polished single-crystal silicon by wire electrical discharge machining using anti-electrolysis pulse generator. In: Proceedings of the 14th Euspen International Conference, 2014, pp.59–62.
12.
KliuevM, BaumgartC and WegenerK.Fluid dynamics in electrode flushing channel and electrode–workpiece gap during electrical discharge machining drilling. Procedia CIRP2018; 68: 254–259.
13.
PuertasI and LuisCJ.A study on the parameters optimization of electrical discharge machining. J Mater Process Technol2003; 143–144: 1–11.
14.
JoseJ and PaulL.Experimental analysis of the influence of discharge gap on electrical discharge machining performance. Mater Today Proc2022; 55: 394–398.
15.
WeingartnerE, KusterF and WegnerK.Modeling and simulation of electrical discharge machining. Procedia CIRP2012; 2: 74–78.
16.
SahaSK and ChoudhurySK.Experimental investigation and empirical modeling of the dry electrical discharge machining process. Int J Mach Tools Manuf2009; 49: 297–308.
17.
HoKH and NewmanST.State of the art electrical discharge machining. Int J Mach Tools Manuf2003; 43: 1287–1300.
18.
GargRK, SinghKK, SachdevaA, . Review of research work in sinking electrical discharge machining and wire electrical discharge machining on metal matrix composite materials. Int J Adv Manuf Technol2010; 50: 799–809.
19.
LauwersB, KruthJP, LiuW, . Investigation of material removal mechanisms in electrical discharge machining of composite ceramic materials. J Mater Process Technol2004; 149: 347–352.
20.
LiuJW, YueTM and GuoZN.An analysis of the discharge mechanism in electrochemical discharge machining of particulate reinforced metal matrix composites. Int J Mach Tools Manuf2010; 50: 86–96.
21.
PourGT, PourYT and GhoreishiM.Thermal model of the electro-spark nanomachining process. Int J Mater Mech Manuf2014; 2(1): 56–59.
22.
TzengYF and LeeCY.Effects of powder characteristics on electro discharge machining efficiency. Int J Adv Manuf Technol2001; 17(8): 586–592.
23.
FurutaniK, SanetoA, TakezawaH, . Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid. Precis Eng2001; 25: 138–144.
24.
WongYS, LimLC, RahumanI, . Near-mirror-finish phenomenon in electrical discharge machining using powder-mixed dielectric. Int J Adv Manuf Technol1998; 79: 30–40.
25.
GhewadeDV.Experimental study of electrical discharge machining for Inconel material. J Eng Res Stud2011; 2: 107–112.
26.
KansalHK, SinghS and KumarP.Technology and research developments in powder mixed electrical discharge machining (PMEDM). J Mater Process Technol2007; 184: 32–41.
27.
LuZZ, ZhaoFL and YangYY.Research on dielectric breakdown and discharge channel in powder-mixed electrical discharge machining. J Dalian Univ Technol2008; 48(3): 373–377.
28.
PrithandanaGS, MahardikaM and Abd ShukorMH.Effect of micro MoS2 powder mixed dielectric fluid on surface quality and material removal rate in micro-electrical discharge machining processes. Trans Mater Res Soc Jpn2009; 34(2): 329–332.
29.
GulIA, MajdiA and Al AminMA.Elucidating powder-mixed electrical discharge machining process, applicability, trends and futuristic perspectives. Machines2023; 11: 381.
30.
JabbaripourB, SadeghiMH and ShabgardMR.Investigating surface roughness, material removal rate and corrosion resistance in powder-mixed electrical discharge machining of γ-TiAl intermetallic. J Manuf Process2013; 15(1): 158–166.
31.
TzengYF and LeeCY.Effects of powder characteristics on electrodischarge machining efficiency. Int J Adv Manuf Technol2001; 17(8): 586–592.
32.
MarashiH, JafarlouDM, SarhanAAD, . State of the art in powder mixed dielectric for electrical discharge machining applications. Precis Eng2016; 46: 11–33.
33.
HaqueR, SekhM, KibriaG, . Comparative study of parametric effects on the performance of simple and powder mixed electrical discharge machining using aluminium and graphite powder on Inconel X750 alloy. Mater Today Proc2021; 46: 8366–8373.
34.
UnsesE and CogunC.Improvement of electrical discharge machining performance of Ti-6Al-4V alloy with added graphite powder to dielectric. J Mech Eng2015; 61(6): 409–418.
35.
FondaP, WangZ, YamazakiK, . A fundamental study on Ti-6Al-4V thermal and electrical properties and their relation to electrical discharge machining productivity. J Mater Process Technol2008; 202(1–3): 583–589.
36.
ChowHM, LinCT and ChenYF.The use of silicon carbide powder in water as dielectric for micro-slit electrical discharge machining. J Mater Process Technol2007; 195(1–3): 160–170.
37.
IshfaqK, AsadM, AnwarS, . Comprehensive analysis of the effect of graphene-based dielectric for sustainable electrical discharge machining of Ti-6Al-4V. Materials2021; 14(13): 23.
38.
SivaprakasamP, HariharanP and GowriS.Experimental investigations on nano powder mixed micro-wire electrical discharge machining process of Inconel-718 alloy. Measurement2019; 147: 106844.
39.
KlockeF, LungD, AntonoglouG, . The effects of powder suspended dielectrics on the thermal influenced zone by electrical discharge machining with small discharge energies. J Mater Process Technol2004; 149: 191–197.
40.
KumarS and BatraU.Surface modification of die steel materials by electrical discharge machining method using tungsten powder mixed dielectric. J Manuf Process2012; 14: 35–40.
41.
JoshiAY and JoshiAY.A systematic review on powder mixed electrical discharge machining. Heliyon2019; 5(12): e02963.
42.
Al KharafiA and AminSA.The effect of silicon carbide powder mixed electrical discharge machining on white layer thickness, heat flux and fatigue life of AISI D2 die steel. Eng Sci Technol Int J2016; 19: 1400–1415.
43.
GostimirovicM, KovacP, SkoricB, . Effect of electrical pulse parameters on the machining performance in electrical discharge machining. Indian J Eng Mater Sci2012; 18: 411–415.
44.
DhakarK, DvivediA and DhimanA.Experimental investigation on effects of dielectric mediums in near-dry electrical discharge machining. J Mech Sci Technol2016; 30: 2179–2185.
45.
NguyenHP, NgoNV and NguyenQT.Optimizing process parameters in electrical discharge machining using low frequency vibration for material removal rate and surface roughness. J King Saud Univ Eng Sci2021; 13: 284–291.
46.
MuthuramalingamT, MohanB, RajaduraiA, . Experimental investigation of iso energy pulse generator on performance measures in electrical discharge machining. Mater Manuf Process2013; 28: 1137–1142.
47.
ChungDK and ChuCN.Effect of inductance in micro electrical discharge machining using high frequency bipolar pulse generator. Int J Precis Eng Manuf Green Technol2015; 2: 299–303.
48.
LiuH, WangZ, ChiG, . Influence of open-circuit voltage on micro electrical discharge machining of Ni-Al2O3 functionally graded materials. Procedia CIRP2018; 68: 5–10.
49.
HouP, GuoY and TangL.Influence of open-circuit voltage on high-speed wire electrical discharge machining of insulating zirconia. Int J Adv Manuf Technol2014; 73: 229–239.
50.
MohantyA, TallaG and GangopadhyayS.Experimental investigation and analysis of electrical discharge machining characteristics of Inconel 825. Mater Manuf Process2014; 29(5): 620–627.
51.
GavaliPB, WaghmareCA and KalashettySS.Experimental investigation of changing polarity in powder mixed electrical discharge machining. Int J Eng Technol2016; 8(5): 2040–2046.
52.
TaqiSA and ShatherSK.Investigation of the effect of negative polarity on surface roughness and material removal rate during electrical discharge machining process. Eng Technol J2020; 38(12A): 1852–1861.
53.
GostimirovicM, KovacP, SekulicM, . Influence of discharge energy on machining characteristics in electrical discharge machining. J Mech Sci Technol2012; 26: 173–179.
54.
KibriaG, SarkarBR, PradhanBB, . Comparative study of different dielectrics for micro electrical discharge machining performance during microhole machining of Ti-6Al-4V alloy. Int J Adv Manuf Technol2010; 48: 557–570.
55.
SanghaniCR and AcharyaGD.Effect of various dielectric fluids on performance of electrical discharge machining: A review. Int J Sci Res2016; 6(1): 145–149.
56.
BatishA, BhattacharyaA and KumarN.Powder mixed dielectric: An approach for improved process performance in electrical discharge machining. In: Proceedings of Conference on Powder and Granular Bulk Solids, 2013.
57.
ShivamG and SinghRK.Parametric study of powder mixed electrical discharge machining and optimization of material removal rate and surface roughness. Int J Sci Eng Technol2017; 3: 56–62.
58.
MarashiH, JafarlouDM and SarhanAAD.State of the art in powder mixed dielectric for electrical discharge machining applications. Precis Eng2016; 46: 11–33.
59.
KumarA, KumarS, MandalA, . Investigation of powder mixed electrical discharge machining process parameters for machining Inconel alloy using response surface methodology. Mater Today Proc2018; 5: 6183–6188.
60.
KansalHK, Sehijpal and KumarP.Effect of silicon powder mixed electrical discharge machining on machining rate of AISI D2 die steel. J Manuf Process2007; 9: 13–22.
61.
WongYS, LimLC and TeeWM.Near-mirror-finish phenomenon in electrical discharge machining using powder mixed dielectric. J Mater Process Technol1998; 79: 30–40.
62.
BhattacharyaA, BatishA and SinglaVK.Optimal parameter settings for rough and finish machining of die steels in powder mixed electrical discharge machining. Int J Adv Manuf Technol2012; 61: 537–548.
63.
TiwaryAP, PradhanBB and BhattacharyyaB.Influence of various metal powder mixed dielectric on micro electrical discharge machining characteristics of Ti-6Al-4V. Mater Manuf Process2019; 34: 1103–1119.
64.
AminMA, RaniAMA and BryantMG.Powder mixed electrical discharge machining for potential biomedical applications: A critical review. Mater Manuf Process2020; 35: 1789–1811.
65.
SrivastavaS, VishnoiM and KukshalV.An insight on powder mixed electrical discharge machining: A state-of-the-art review. Proc Inst Mech Eng B J Eng Manuf2022; 237(5): 657–690.
66.
JampanaVNR, RaoPSVR and SampathkumarA.Experimental and thermal investigation on powder mixed electrical discharge machining using finite element method and artificial neural networks. J Adv Mater Sci Eng2021; 2021: 8138294.
67.
BhowmickS, MondalR, SarkarS, . Parametric optimization and prediction of material removal rate and surface roughness of titanium mixed electrical discharge machining for Inconel 718 using response surface methodology and fuzzy logic. CIRP J Manuf Sci Technol2023; 40: 10–28.
68.
TripathySK and TripathyDK.Grey relational analysis and its application on surface properties during electrical discharge machining and powder mixed electrical discharge machining. J Eng Sci Technol2017; 12(9): 2374–2392.
69.
SahuDR and MandalA.Critical analysis of surface integrity parameters and dimensional accuracy in powder mixed electrical discharge machining. Mater Manuf Process2020; 35: 430–441.
70.
TripathyS and TripathyDK.Optimization of process parameters in powder mixed electrical discharge machining. In: Precision product–process design and optimization, 2018, pp.239–283.
71.
KumarS, KumarA, KumarV, . Study of machining of Inconel 825 superalloy using powder mixed electrical discharge machining process. Mater Today Proc2018; 5: 18129–18134.
72.
SyedKH and KuppanP.Studies on recast layer in electrical discharge machining using aluminium powder mixed distilled water dielectric fluid. Int J Eng Technol2013; 5.
73.
ShabgardM, OliaeiSNB and NajadebrahimiA.Experimental investigation and three-dimensional finite element prediction of the white layer thickness, heat affected zone and surface roughness in electrical discharge machining process. J Mech Sci Technol2011; 25: 3173–3183.
74.
TallaG, GangopadhyayS and BiswasCK.Influence of graphite powder mixed electrical discharge machining on the surface integrity characteristics of Inconel 625. Particul Sci Technol2017; 35: 219–226.
75.
BatishA, BhattacharyaA and KumarN.Powder mixed dielectric: An approach for improved process performance in electrical discharge machining. Particul Sci Technol2015; 33: 150–158.
76.
DewanPR, KunduPK and PhiponR.Powder mixed electrical discharge machining: A review. AIP Conf Proc2020; 2273: 050075.
77.
PatelS, ThesiyaD and RajurkarA.Aluminium powder mixed rotary electrical discharge machining on Inconel 718. Aust J Mech Eng2016; 16: 21–30.
78.
RoutPK and JenaPC.A review of current researches on powder mixed electrical discharge machining technology. In: Advances in mechanical processing and design, 2020, pp.489–497.
79.
ErdenA and BilginS.Role of impurities in electrical discharge machining. In: Proceedings of the International Machine Tool Design and Research Conference, 1980, pp.345–350.
80.
JeswaniML.Effect of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining. Wear1981; 70(2): 133–139.
81.
ErdenA.Effect of materials on the mechanism of electrical discharge machining. J Eng Mater Technol1983; 105(2): 132–138.
82.
MingQY and HeLY.Powder suspension dielectric fluid for electrical discharge machining. J Mater Process Technol1995; 52(1): 44–54.
83.
UnoY, OkadaA, HayashiY, . Surface integrity in electrical discharge machining of aluminum bronze with nickel powder mixed fluid. J Jpn Soc Electr Mach Eng1998; 32(70): 24–31.
84.
FukuzawaY, TaniT and MohriN.Machining characteristics of insulated silicon nitride ceramics by electrical discharge machining. J Ceram Soc Jpn2000; 102(2): 184–190.
85.
YanBH, LinYC, HuangFY, . Surface modification of SKD62 tool steel during electrical discharge machining with metal powder in dielectric. Mater Trans2000; 42(12).
86.
FurutaniK and ShirakiK.Deposition of lubricant layer during finishing process by electrical discharge machining with molybdenum disulphide powder suspended in working fluid. In: Proceedings of the ASME International Conference on Materials Processing, Honolulu, 2002.
87.
PecasP and HenriquesE.Influence of silicon powder mixed dielectric on conventional electrical discharge machining. Int J Mach Tools Manuf2003; 43: 1465–1471.
88.
KlockeF, LungD, AntonoglouG, . The effects of powder suspended dielectrics on the thermal influenced zone by electrical discharge machining with small discharge energies. J Mater Process Technol2004; 149: 191–197.
89.
KansalHK, SinghS and KumarP.Parametric optimization of powder mixed electrical discharge machining by response surface methodology. J Mater Process Technol2005; 169: 427–436.
90.
CogunC, OzerkanB and KaracayT.An experimental investigation on the effect of powder mixed dielectric in machining performance in electrical discharge machining. Proc Inst Mech Eng B J Eng Manuf2006; 220(7): 1035–1050.
91.
KansalHK, SinghS and KumarP.Effect of silicon powder mixed electrical discharge machining on machining rate of AISI D2 die steel. J Manuf Process2007; 9(1): 13–22.
92.
PecasP and HenriquesE.Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder mixed dielectric. Int J Adv Manuf Technol2008; 37: 1120–1132.
93.
KungKY, HorngJT and ChiangKT.Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide. Int J Adv Manuf Technol2009; 40: 95–104.
94.
JahanMP, RahmanM and WongYS.Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide. Proc Inst Mech Eng B J Eng Manuf2010; 224(11): 1725–1739.
95.
JahanMP, RahmanM and WongYS.Study on the nano powder mixed sinking and milling micro electrical discharge machining of WC-Co. Int J Adv Manuf Technol2011; 53: 167–180.
96.
BhattacharyaA, BatishA, SinghG, . Optimal parameter settings for rough and finish machining of die steels in powder mixed electrical discharge machining. Int J Adv Manuf Technol2012; 61: 537–548.
97.
HuFQ, CaoFY, SongBY, . Surface properties of SiCp/Al composite by powder mixed electrical discharge machining. Procedia CIRP2013; 6: 101–106.
98.
RathiMG and ManeDV.Study on effect of powder mixed dielectric in EDM of Inconel 718. Int J Sci Res Publ2014; 4(11): 1–7.
99.
KumarH.Development of mirror-like surface characteristics using nano powder mixed electrical discharge machining. Int J Adv Manuf Technol2014; 76: 105–113.
100.
SinghB, KumarJ and KumarS.Influences of process parameters on material removal rate improvement in simple and powder mixed electrical discharge machining of AA6061/10%SiC composite. Mater Manuf Process2015; 30: 303–312.
101.
ToshimitsuR, OkadaA, KitadaR, .Improvement in surface characteristics by EDM with chromium powder mixed fluid. Procedia Cirp2016; 42: 231–235.
102.
TallaG, GangopadhyayS and BiswasCK.Influence of graphite powder mixed electrical discharge machining on the surface integrity characteristics of Inconel 625. Particul Sci Technol2017; 35: 219–226.
103.
ModicaF, MarroccoV, ValoriM, . Study about the influence of powder mixed water-based fluid on micro electrical discharge machining process. In: Proceedings of CIRP Conference on Electro Physical and Chemical Machining, 2018.
104.
BainsPS, SidhuSS, PayalHS, . Magnetic field influence on surface modifications in powder mixed electrical discharge machining. Silicon2018; 11: 415–423.
105.
JamilNAH, LajisMA and IdrisMR.Modelling and optimization of chromium powder mixed electrical discharge machining parameter effect over the surface characteristics using response surface methodology. Int J Eng Mater Manuf2018; 3(2): 78–86.
106.
TiwaryAP, PradhanBB and BhattacharyyaB.Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V. Mater Manuf Process2019; 34(10): 1103-1119.
107.
DerO and BertolaV.An experimental investigation of oil–water flow in a serpentine channel. Int J Multiphase Flow2020; 129: 103327.
108.
LuziaCAO, LaurindoCAH, SoaresPC, . Recast layer mechanical properties of tool steel after electrical discharge machining with silicon powder in the dielectric. Int J Adv Manuf Technol2019; 103: 15–28.
109.
KumarA, MandalA, DixitAR, . Quantitative analysis of bubble size and electrode gap at different dielectric conditions in powder mixed electrical discharge machining process. Int J Adv Manuf Technol2020; 107: 3065–3075.
110.
RameshS, JenarthananMP.Optimizing the powder mixed EDM process of nickel based super alloy. Proc Inst Mech Eng E J Process Mech Eng2021; 235(4): 1092–1103.
111.
AlhodaibA, ShandilyaP, RouniyarAK, . Experimental investigation on silicon powder mixed electrical discharge machining of Nimonic-90 superalloy. Metals2021; 11: 1673.
112.
PenmetsaRV, IlankoAK, RajeshS, . Experimental study and machining parameter optimization on powder-mixed EDM of Nimonic 901 using feed-forward backpropagation neural networks. Int J Adv Manuf Technol2022: 1–5.
113.
SuraniK, PatelSK, AlrubaleAJ, . Performance comparison of powder mixed electrical discharge machining and traditional electrical discharge machining on TZM-molybdenum superalloy using response surface methodology. Int J Interact Des Manuf2023; 17: 2647–2658.
114.
LeVT, HoangL, FathullahM, . Optimization and comparison of machining characteristics of SKD61 steel in powder mixed electrical discharge machining process using TOPSIS and desirability approach. Int J Adv Manuf Techno. 2024; 130: 403–424.
115.
BasarG, KahramanF and DerO.Multi-response optimization of parameters in direct hot-pressed Al/B4C/SiC hybrid composites using Taguchi-based entropy–CoCoSo method. Materials2025; 18: 4319.
116.
SirinTB, DerO, KusH, . Optimization of end mill geometry for machining 1.2379 cold-work tool steel through hybrid RSM-ANN-GA coupled finite element analysis approach. Machines2026; 14: 15.
