Design strategies to achieve target collapse risks for reinforced concrete wall buildings in sedimentary basins

Studies of recorded ground motions and simulations have shown that deep sedimentary basins can greatly increase the damage expected during earthquakes. Unlike past earthquake design provisions, future ones are likely to consider basin effects, but the consequences of accounting for these effects are uncertain. This article quantifies the impacts of basin amplification on the collapse risk of 4- to 24-story reinforced concrete wall building archetypes in the uncoupled direction. These buildings were designed for the seismic hazard level in Seattle according to the ASCE 7-16 design provisions, which neglect basin effects. For ground motion map frameworks that do consider basin effects (2018 USGS National Seismic Hazard Model), the average collapse risk for these structures would be 2.1% in 50 years, which exceeds the target value of 1%. It is shown that this 1% target could be achieved by: (1) increasing the design forces by 25%, (2) decreasing the drift limits from 2.0% to 1.25%, or (3) increasing the median drift capacity of the gravity systems to exceed 9%. The implications for these design changes are quantified in terms of the cross-sectional area of the walls, longitudinal reinforcement, and usable floor space. It is also shown that the collapse risk increases to 2.8% when the results of physics-based ground motion simulations are used for the large-magnitude Cascadia subduction interface earthquake contribution to the hazard. In this case, it is necessary to combine large changes in the drift capacities, design forces, and/or drift limits to meet the collapse risk target.