This paper describes experiments conducted in the framework of a research project aimed at finding suitable barrier films for vacuum insulation panels (VIPs), which are used for applications in the cooling industry (especially for ducts in liquified natural gas [LNG] installations) and in the building industry. It explores the heat seal strength of four makes of film used for this purpose. A secondary purpose was to investigate the influence of the heat seal parameters on the heat seal strength of the tested films. The heat seals were tested at room temperature and at -130°C, from which it readily became clear that the heat seal parameters can be chosen freely within certain limits.
Fricke, J., Schwab, H. and Heinemann, U. (2006). Vacuum Insulation Panels - Exciting Thermal Properties and Most Challenging Applications, International Journal of Thermophysics, 27(4): 1123-1139.
2.
Simmler, H., Brunner, S., Heinemann, U., Schwab, H., Kumaran, K., Mukhopadhyaya, Ph., Quénard, D., Sallée, H., Noller, K., Kücükpinar-Niarchos, E., Stramm, C., Tenpierik, M.J., Cauberg, J.J.M. and Erb, M. (2005). Panels, Vacuum Insulation Panels. Study on VIP-components and Panels for Service Life Prediction of VIP in Building Applications (Subtask A), IEA/ ECBCS, Paris, 150 pages, online available at http://www.vip-bau.ch
3.
Brunner, S., Gasser, Ph., Simmler, H. and Ghazi Wakili, K. (2006). Investigation of Multilayered Aluminium-coated Polymer Laminates by Focused Ion Beam (FIB) Etching, Surface & Coatings Technology, 200(20-21): 5908-5914.
4.
Meka, P. and Stehling, F.C. (1994). Heat Sealing of Semicrystalline Polymer Films. I. Calculation and Measurement of Interfacial Temperatures: Effect of Process Variables on Seal Properties, J. of Appl. Poly. Sci., 51(1): 89-103.
5.
Mueller, C., Capaccio, G., Hiltner, E. and Bear, E. (1998). Heat Sealing of LLDPE: Relationships to Melting and Interdiffusion, J. of Appl. Poly. Sci., 70(10): 2021-2030.
6.
Fiscus, D.M. (2004). Metallocenne LLDPE Films for Heavy-Duty Sack Applications, J. Plas. Film & Shtg. , 20(2): 105-148.
7.
Morris, B.A. (2002). Predicting the Heat Seal Performance of Ionomer Films, J. Plas. Film & Shtg., 18(3): 157-167.
8.
Young, R.J. and Lovell, P.A. (1991). Introduction to Polymers, 2nd edn, p. 91, London: Chapman and Hall.
9.
CallisterJr, W.D. (1994). Materials Science and Engineering, an Introduction , 3rd edn, p. 131, New York: John Wiley and Sons Inc.
10.
Ashby, M.F. (2005). Materials Selection in Mechanical Design, 3rd edn, Appendix C, Oxford: Elsevier Butterworth-Heinemann.
