Control of the Thickness Distribution of Blown Film By Changing the Flow Channel Gap of the Die Over the Circumference

Abstract

The thickness distribution of blown film is conventionally controlled by either changing the temperature or the velocity of the cooling air. This technique cannot be used for the double bubble process, where the film is cooled by water before being reheated and blown up in a second step. A new technique to alter the localized gap of the flow channel at the exit of the die has been developed. It can be used to control the thickness over the circumference of the blown film for both the conventional and double bubble process. The technology is explained and initial test results achieved are presented herein.

Keywords

blown film die flow channel adjustment layer thickness thickness control.

Get full access to this article

View all access options for this article.

References

Kanai, T. and Campbell, G.A. (1999). Film Processing, Ch. 7.1, Hanser Verlag, München, Wien , p. 386.

Gross, H. (2003). Die Optimization: Flexible Die Walls, Kunststoffe International, 8: 8-9.

Gross, H. (2008). New Flex Ring Dies Improve the Thickness Tolerances of Pipes and Thus Save Material, In: Proceedings SPE ANTEC 2008, Milwaukee, Wisconsin.

Gross, H. (2008). New Technology to Vary the Radial Thickness Distribution of the Parison in Extrusion Blow Moulding, In: Proceedings SPE ANTEC 2008, Milwaukee, Wisconsin.

Michaeli, W. , Brümmer, T. , Wenigmann, S. and Fink, B. (2006). Extrusionswerkzeuge. In: Proceedings of 23 Internationales Kunststofftechnisches Kolloquium of IKV, Ch. 2, 15-16 March, Aachen, Germany.