The purpose of this study is to generate polypropylene (PP) blend films with improved oxygen gas and water vapor barrier properties, which are intended to be used in packaging applications. PP blend films containing 5 wt% ethylene vinyl alcohol (EVOH) or poly(m-xylene adipamide) (N-MXD6) were prepared, biaxially stretched, and characterized by employing differential scanning calorimeter, scanning electron microscope, oxygen gas and water vapor permeability analyzers. No barrier property improvement was observed, which is caused by the low amount of the dispersed phase used.
Yeo, J.H. , Lee, C.H., Park, C.-S., Lee, K.-J., Nam, J.-D. and Kim, S.W. (2001). Rheological, Morphological, Mechanical, and Barrier Properties of PP/EVOH Blends, Adv. Polym. Technol., 20(3): 191-201.
2.
Kubo, K. and Kusu, M. ( 2001). Magnetic Recording/Reproducing Device, Unitika Ltd., Japan. JP 2001001399 Jpn. Kokai Tokkyo Koho.
3.
Kale, D.D., Kharade, A.Y., Kim, J.G. and Jung, I.H. ( 1998). Blend of Nylon 6-PET Waste, Korea Polym. J., 6(1): 105-109.
4.
Nnanna, I.A., Wu, W. and Hui, Y.H. ( 2007). Handbook of Food Products Manufacturing, Wiley-Interscience, New York.
5.
Martins, C.I. and Cakmak, M. (2007). Control of the Strain-Induced Crystallization of Polyethylene Terephthalate by Temporally Varying Deformation Rates: A Mechano-optical Study, Polymer, 48(7): 2109-2123.
6.
Kit, K.M. , Schultz, J.M. and Gohil, R.M. (1995). Morphology and Barrier Properties of Blends of Poly(ethylene terephthalate) and Poly(ethylene 2,6 naphthalate) with Poly(ethylene-co-vinyl alcohol), Polym. Eng. Sci., 35(8): 680-692.
7.
Kimura, K., Katoh, T. and McCarthy, S.P. ( 1996). In: Proceedings 54th Annual Technical Conference of Society of Plastics Engineers, Indianapolis, Indiana, USA, Vol. 2, pp. 2626-2631.
8.
Samios, C.K. and Kalfoglou, N.K. ( 2001). Acrylic-modified Polyolefin Ionomers as Compatibilizers for Poly(ethylene-co-vinyl alcohol)/Aromatic Copolyester Blends, Polymer, 42(8): 3687-3696.
9.
Gopalakrishnan, R., Schultz, J.M. and Gohil, R.M. (1995). Effect of Blend Rheology on the Transport Property of Oriented Polyethylene Terephthalate Blends, J. Appl. Polym. Sci., 56(13): 1749-1759.
10.
Bandi, S., Mehta, S. and Schiraldi, DA ( 2005). The Mechanism of Color Generation in Poly(ethylene terephthalate)/Polyamide Blends, Polym. Deg. Stab., 88(2): 341-348.
11.
Doudou, B.B.Dargent, E. and Grenet, J.J. (2005). Relationship between Draw Ratio and Strain-induced Crystallinity in Uniaxially Hot-Drawn PET MXD6 Films, J. Plast. Film Sheet., 21(3): 233-251.
12.
Hu, Y.S. , Prattipati, V., Mehta, S., Schiraldi, D.A., Hiltner, A. and Baer, E. (2005). Improving Gas Barrier of PET by Blending with Aromatic Polyamides, Polymer, 46(8): 2685-2698.
13.
Prattipati, V., Hu, Y.S., Bandi, S., Schiraldi, D.A., Hiltner, A., Baer, E. and Mehta, S. (2005). Effect of Compatibilization on the Oxygen-Barrier Properties of Poly(ethylene terephthalate)/Poly(m-xylylene adipamide) Blends, J. Appl. Polym. Sci., 97(3): 1361-1370.
14.
Hu, Y.S. , Prattipati, V., Hiltner, A., Baer, E. and Mehta, S. (2005). Improving Transparency of Stretched PET/MXD6 Blends by Modifying PET with Isophthalate, Polymer, 46(14): 5202-5210.
15.
Özen, İ., Bozoklu, G., Dalgıçdir , C., Yücel, O., Ünsal, E., Çakmak, M. and Menceloğlu, Y.Z. ( 2010). Improvement in Gas Permeability of Biaxially Stretched PET Films Blended with High Barrier Polymers: The Role of Chemistry and Processing Conditions, Eur. Polym. J., 46(2): 226-237.
16.
Özen, İ. and Menceloğlu , Y.Z. (2009). Morphology of Poly(ethylene terephthalate) Blends: An Analysis under Real Processing Conditions by Rheology and Microscopy, Adv. Polym. Technol., 28(3): 173-184.
17.
http://www.resourcefilling.com/info.htm (accessed date December 20, 2010).
18.
Brahimi, B. , Ai’t-Kadi, A., Ajji, A., Fayt, R. and Pol, J. (1991). Effect of Diblock Copolymers on Dynamic Mechanical Properties of Polyethylene/Polystyrene Blends, J. Polym. Sci: Part B: Polym Phys, 29(8): 945-961.
19.
Bousmina, M. and Muller, R. (1996). Rheology/Morphology/Flow Conditions Relationships for Polymethylmethacrylate/Rubber Blend, Rheol. Acta, 35(4): 369-381.
20.
Lee, S.Y. and Kim, S.C. (1997). Laminar Morphology Development and Oxygen Permeability of LDPE/EVOH Blends, Polym. Eng. Sci., 37(2): 463-475.
21.
Liu, R.Y.F. , Schiraldi, D.A., Hiltner, A. and Baer, E. (2002). Oxygen-barrier Properties of Cold-drawn Polyesters, J. Polym. Sci. Part B: Polym. Phys. , 40(9): 862-877.
22.
Brazeau, J., Chenard, Y. and Zhao, Y. ( 1998). Orientation in Stretched Polymerdispersed Liquid Crystals , Can. J. Chem., 76(11): 1642-1647.
23.
Liu, R.Y.F. , Hu, Y.S., Hibbs, M.R., Collard, D.M., Schiraldi, D.A., Hiltner, A. and Baer, E. (2005). Improving Oxygen Barrier Properties of Poly(ethylene terephthalate) by Incorporating Isophthalate. I. Effect of Orientation, J. Appl. Polym. Sci., 98(4): 1615-1628.
24.
Bonis, L.J. ( 1989). Plastic Film Technology, High Barrier Plastic Films for Packaging, Vol. 1, p. 80, Technomic, Lancaster, PA.
25.
Salame, M. ( 1989). Plastic Film Technology, High Barrier Plastic Films for Packaging, Vol. 1, p. 132, Technomic, Lancaster, PA.
26.
Bourque, R.A. (1989). Plastic Film Technology , High Barrier Plastic Films for Packaging, Vol. 1, p. 32, Technomic, Lancaster, PA.
27.
Jabarin, S.A. and Kollen, W.J. (1998). Polyolefin Properties for Rigid Food Packaging, Polym. Eng. Sci., 28(18): 1156-1161.
28.
Montoya, M. , Abad, M.J., Barral, L. and Bernal, E. (2006). Mechanical and Fracture Behavior of Polypropylene/Poly(ethylene-co-vinyl alcohol) Blends Compatibilized with Ionomer Na+, Polym. J., 42(2): 265-273.
29.
Faisant, J.B. , A’it-Kadi A., Bousmina, M. and Deschenes, L. (1998). Morphology, Thermomechanical and Barrier Properties of Polypropylene-Ethylene Vinyl Alcohol Blends, Polymer, 39(3): 533-545.
30.
Kamal M.R., Garmabi, H., Hozhabr, S. and Arghyris, L. ( 1995). The Development of Laminar Morphology During Extrusion of Polymer Blends, Polym. Eng. Sci., 35(7): 41-51.
31.
Mirabella, F.M. (1987). Determination of the Crystalline and Noncrystalline Molecular Orientation in Oriented Polypropylene by Infrared Spectroscopy, J. Polym. Sci. Part B, 25(3): 591-602.
32.
Kegel, M. ( 2006). Fibres from recycled post consumer PET/Nylon 6 blends, PhD Thesis, Swinburne University of Technology, Hawthorn, Victoria, Australia.
33.
Weichuan, D. , Wei, Z., Yijian, L., Liang, S. and Qiangguo, D. (2004). Space Charge Distribution and Crystalline Structure in Polyethylene Blended with EVOH. Eur. Polym. J., 40(8): 1987-1995.
34.
http://www.scottbader.com,CrysticVE676-03,ProvisionalDataSheet (accessed date December 20, 2010).
35.
Lee, S.Y. and Kim, S.C. (1998). Effect of Compatibilizer on the Crystallization, Rheological, and Tensile Properties of LDPE/EVOH Blends . J. Appl. Polym. Sci., 68(8): 1245-1256.
36.
Ikkala, O.T. , Holsti-Miettinen R.M. and Seppala, J. (1993). Effects of Compatibilization on Fractionated Crystallization of PA6/PP Blends . J. Appl. Polym. Sci., 49(7): 1165-1174.
37.
Moon, H.S., Ryoo, B.K. and Park, J.K. ( 1994). Concurrent Crystallization in Polypropylene/Nylon-6 Blends Using Maleic Anhydride Grafted Polypropylene as a Compatibilizing Agent. J. Polym. Sci. Part B, Polym. Phys., 32(9): 1427-1435.
38.
Ibhadon, A.O. (1991). Effect of Orientation on Melting of Isotactic Polypropylene. J. Appl. Polym. Sci, 43(3): 567-571.
39.
Frensch, H., Harnischfeger, P. and Jungnickel, B.J. ( 1989). Multiphase Polymer: Blends and Ionomers, In: Utracki, L.A. and Weiss, R.A. (eds), ACS Symposium Series, American Chemical Society , Washington, DC, Vol. 395, Ch.5, pp.101-125.
40.
Holsti-Miettinen, R., Seppala J. and Ikkala, O.T. (1992). Effects of Compatibilizers on the Properties of Polyamide/Polypropylene Blends. Polym. Eng. Sci., 32(13): 868-877.
41.
Kim, H.K. and Kim, S.C. (1990). Effect of Compatibilizer on the Crystallization Kinetics and Mechanical Properties of Nylon 6/LDPE Blends. Polym. Adv. Technol., 1(5/6): 325-334.
42.
Jose, S., Francis, B., Thomas, S. and Karger-Kocsis, J. ( 2006). Morphology and Mechanical Properties of Polyamide 12/PolypropyleneBlends in Presence and Absence of Reactive Compatibiliser. Polymer , 47(11): 3874-3888.
43.
Bai, S.-L. , Wang, G.-T., Hiver, J.-M. and Sell C.G. (2005). Microstructures and Mechanical Properties of Polypropylene/Polyamide 6/Polyethelene-Octene Elastomer Blends, Polymer, 45(9): 3063-3071.
44.
Hiltner, A. , Liu, R.Y.F., Hu, Y.S., Baer, E. (2005). Oxygen Transport as a Solid-State Structure Probe for Polymeric Materials: A ReviewJ. Polym. Sci.: Part B: Polym. Phys, 43(9): 1047-1063.
