Effect of modified filler surfaces and filler-tethered polymer chains on morphology and physical properties of poly(azo-pyridyl-urethane)/multi-walled carbon nanotube nanocomposites

Abstract

Poly(azo-pyridyl-urethane)/multi-walled carbon nanotube (PAPU/MWCNT) nanocomposites were prepared by first synthesizing polyurethane followed by solution dispersing MWCNT in the matrix. We have used two different MWCNTs: the first set of MWCNT contained carboxylic acid group (MWCNT-COOH) and the second set contained acid chloride group (MWCNT-COCl). Afterward, these MWCNT particles were used in the preparation of PAPU/MWCNT nanocomposites. In the first set of nanocomposites, MWCNT-COOH and PAPU were just physically mixed and were designated as PAPU/MWCNT-A. In the second set of nanocomposites, PAPU chains were tethered onto the surfaces of MWCNT-COCl particles and designated as PAPU/MWCNT-AC. Two types of nanocomposites were thus fabricated, including acid functionalized nanotube-based non-tethered PAPU/MWCNT and acid chloride functionalized MWCNT-based tethered system. We have incorporated hydroxyl end-terminated polyurethane via “grafting to” approach to acid chloride functional MWCNT through esterification. Fourier transform infrared spectra confirmed that the matrix was covalently attached to sidewalls of nanotube. Various nanotube loading levels and surface-modified groups were considered to regulate mechanical, thermal and electrical performance of PAPU/MWCNT. The experimental results showed that a moderate loading level of 5 wt. % MWCNT produced the maximum tensile strength (63.1 MPa) in tethered nanocomposites, while the presence of surface carboxylation of MWCNT relatively decreased the tensile strength (49.7 MPa). Comparative studies based on scanning and transmission electron microscopy of the chemically bonded samples revealed unique nano-fibriller morphology. Dynamic mechanical analysis of nanocomposite films showed an increased segmental rigidity with T_g of 144–153℃ in the tethered system relative to pristine PAPU (133℃). Addition of acid chloride functional MWCNT also contributed to an enhancement in the conductivity (2.9–4.7 S cm⁻¹), relative to PAPU/carboxylated MWCNT (2.0–2.7 S cm⁻¹).

Keywords

Poly(azo-pyridyl-urethane)multi-walled carbon nanotube tethered scanning electron microscopy transmission electron microscopy

Get full access to this article

View all access options for this article.

References

Zdenko

Dimitrios

Konstantinos

. Carbon nanotube polymer composites: Chemistry, processing, mechanical and electrical properties. Prog Polym Sci 2010; 35: 357–401.

Nanda

Sravendra

Jae

. Polymer nanocomposites based on functionalized carbon nanotubes. Prog Polym Sci 2010; 35: 837–867.

Lin

Zhou

Fernando

SKA

. Polymeric carbon nanocomposites from carbon nanotubes functionalized with matrix polymer. Macromolecules 2003; 36: 7199–7204.

Liu

Phang

Shen

. Morphology and mechanical properties of multiwalled carbon nanotubes reinforced nylon-6 composites. Macromolecules 2004; 37: 7214–7222.

Sreekumar

Liu

Min

. Polyacrylonitrile single-walled carbon nanotube composite fibers. Adv Mater 2004; 16: 58–61.

Brown

Anderson

Justice

. Hierarchical morphology of carbon single-walled nanotubes during sonication in an aliphatic diamine. Polymer 2005; 46: 10854–10865.

Kanagaraj

Varanda

Zhiltsova

. Mechanical properties of high density polyethylene/carbon nanotube composites. Compos Sci Technol 2007; 67: 3071–3077.

Kausar

Hussain

. Synthesis and properties of poly(thiourea-azo-naphthyl)/multiwalled carbon nanotube composites. J Plast Film SheetEpub ahead of print 30 April 2013. DOI: 10.1177/8756087913483650.

Chen

Hamon

. Solution properties of single-walled carbon nanotubes. Science 1998; 282: 95–98.

10.

Sano

Kamino

Okamura

. Self-organization of PEO-graft-single-walled carbon nanotubes in solutions and langmuir-blodgett films. Langmuir 2001; 17: 5125–5128.

11.

Ying

Saini

Liang

. Functionalization of carbon nanotubes by free radicals. Org Lett 2003; 5: 1471–1473.

12.

Georgakilas

Kordatos

Prato

. Organic functionalization of carbon nanotubes. J Am Chem Soc 2002; 124: 760–761.

13.

Ruan

Gao

Yang

. Toughening high performance ultrahigh molecular weight polyethylene using multiwalled carbon nanotubes. Polymer 2003; 44: 5 643–5 654.

14.

Tang

Santare

Advani

. Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite films. Carbon 2003; 41: 2779–2785.

15.

Gordeyev

Macedo

Ferreira

. Transport properties of polymer-vapour grown carbon fibre composites. Phys B: Cond Matt 2000; 279: 33–36.

16.

Jin

Pramoda

. Dynamic mechanical behavior of melt-processed multi-walled carbon nanotube/poly(methyl methacrylate) composites. Chem Phys Lett 2001; 337: 43–47.

17.

Chapellem

Stephan

Nguyen

. Raman characterization of single walled carbon nanotubes and pmma-nanotubes composites. Synth Met 1999; 103: 2510–2512.

18.

Jia

Wang

. Surface modified multiwalled carbon nanotubes in CNT/Epoxy-composites. Mater Sci Eng A 1999; 271: 395–400.

19.

Andrews

Jaques

Rao

. Nanotube composite carbon fibers. Appl Phys Lett 1999; 75: 1329–1331.

20.

Schadler

Ciannaris

Ajayan

. Load transfer in carbon nanotube epoxy composites. Appl Phys Lett 1998; 73: 3842–3844.

21.

Park

Kim

Lee

. Nondestructive damage sensitivity and reinforcing effect of carbon nanotube/epoxy composites using electro-micromechanical technique. Mater Sci Eng C 2003; 23: 971–975.

22.

Gojny

Nastalczyk

Roslaniec

. Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites. Chem Phys Lett 2003; 370: 820–824.

23.

Quan

Dickey

Andrews

. Load transfer and deformation mechanisms in carbon nanotube–polystyrene composites. Appl Phys Lett 2000; 76: 2868–2870.

24.

Fernandez

Landa

Eugenia Munoz

. Thermal and viscoelastic features of new nanocomposites based on a hot- melt adhesive polyurethane and multi-walled carbon nanotubes. Macromol Mater Eng 2010; 295: 1031–1041.

25.

Chattopadhyay

Dean

. Thermal stability and flame retardancy of polyurethanes. Prog Polym Sci 2009; 34: 1068–1133.

26.

Marc

Muhammad

Andreas

. Multifunctional shape-memory polymers. Adv Mater 2010; 22: 3388–3410.

27.

Sahoo

Jung

Yoo

. Effect of functionalized carbon nanotubes on molecular interaction and properties of polyurethane composites. Macromol Chem Phys 2006; 207: 1773–1780.

28.

Sahoo

Jung

Yoo

. Influence of carbon nanotubes and polypyrrole on the thermal, mechanical and electroactive shape-memory properties of polyurethane nanocomposites. Compos Sci Technol 2007; 67: 1920–1929.

29.

Guo

Zhang

Wang

. Preparation and characterization of polyurethane/multiwalled carbon nanotube composites. Polym Compos 2008; 16: 501–507.

30.

Hussain ST. Novel catalyst to manufacture carbon nanotubes and hydrogen gas. Patent US2009208403, 2009.

31.

Kausar

Hussain

. Effect of multi-walled carbon nanotubes reinforcement on the physical properties of poly(thiourea-azo-ether)-based nanocomposites. J Plast Film SheetEpub ahead of print 24 May 2013. DOI: 10.1177/8756087913487003.

32.

Hussain

Abbas

Kausar

. New polyaniline/polypyrrole/polythiophene and functionalized multi-walled carbon nano-tubes based nanocomposites: Layer by layer in-situ polymerization. High Perform Polym 2012; 25: 70–78.

33.

Kausar

Zulfiqar

Sarwar

. High performance segmented polyurethanes derived from a new aromatic diisocyanate and polyol. Polym Degrad Stab 2012; 98: 368–376.

34.

Sahoo

Jung

Yoo

. Influence of carbon nanotubes and polypyrrole on the thermal, mechanical and electroactive shape-memory properties of polyurethane nanocomposites. Compos Sci Tech 2007; 67: 1920–1929.

35.

Wang

T-L

Tseng

C-G

. Polymeric carbon nanocomposites from multiwalled carbon nanotubes functionalized with segmented polyurethane. J Appl Polym Sci 2007; 105: 1642–1650.

36.

Gunes

Pérez-Bolivar

Cao

. Analysis of non-covalent interactions between the nanoparticulate fillers and the matrix polymer as applied to shape memory performance. J Mater Chem 2010; 20: 3467–3474.

37.

Buffa

Abraham

Grady

. Effect of nanotube functionalization on the properties of single-walled carbon nanotube/polyurethane composites. J Polym Sci Part B Polym Phys 2007; 45: 490–501.