Preparation and properties of polyamide/epoxy/multi-walled carbon nanotube nanocomposite

Abstract

Nanocomposite composed of amine-terminated polyamide (an aramid)/bisphenol A diglycidyl ether epoxy matrix and functionalized and non-functionalized multi-walled carbon nanotube have been fabricated. Polyamide/bisphenol A diglycidyl ether/multi-walled carbon nanotube nanocomposite was cured at 120℃ with different filler content. In order to investigate the influence of functional filler on nanocomposite properties, morphological, mechanical and thermal profile of polyamide/bisphenol A diglycidyl ether nanocomposite with varying multi-walled carbon nanotube content were studied. Functional multi-walled carbon nanotube-reinforced nanocomposite showed greater strengthening at all weight percent as they actively control the failure mechanism; 5 wt% functional multi-walled carbon nanotube-based sample showed 62% improvement in toughness i.e. area under the stress–strain curve (35.6 J/m³) relative to non-functional (13.7 J/m³) nanocomposite. The ultimate tensile strength also improved from 39.2 to 59.7 MPa. The multi-walled carbon nanotube ratio was an interesting feature significantly influencing the properties of polyamide/bisphenol A diglycidyl ether/multi-walled carbon nanotube due to the contribution of hydrogen bonding and π-π staking between the matrix and filler. Thermal stability consistently increased with amalgamation of functional multi-walled carbon nanotube in the polyamide/bisphenol A diglycidyl ether matrix (T₀ 523–565℃; T_g 247–253℃) over polyamide/bisphenol A diglycidyl ether /non-functional multi-walled carbon nanotube (T₀ 499℃; T_g 246℃). Novelty of the research lies in exclusive architecture, exceptional heat stability and mechanical properties of aramid/epoxy-based nanocomposite.

Keywords

Polyamide/epoxy bisphenol A diglycidyl ether nanocomposite multi-walled carbon nanotube π-π staking

Get full access to this article

View all access options for this article.

References

Nosonovsky

Bhushan

. Multiscale friction mechanisms and hierarchical surfaces in nano and bio-tribology. Mater Sci Eng R 2007; 58: 162–193.

Tjong

. Structural and mechanical properties of polymer nanocomposites. Mater Sci Eng R 2006; 53: 73–197.

Dasari

Mai

. Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites. Mater Sci Eng R 2009; 63: 31–80.

Baur

Silverman

. Challenges and opportunities in multifunctional nanocomposite structures for aerospace applications. MRS Bull 2007; 32: 328–334.

Fiedler

Gojny

Wichmann

MHG

. Fundamental aspects of nano-reinforced composites. Comp Sci Technol 2006; 66: 3115–3125.

Andrews

Weisenberger

. Carbon nanotube polymer composites. Curr Opin Solid State Mater Sci 2004; 8: 31–37.

Xie

Mai

Zhou

. Dispersion and alignment of carbon nanotubes in polymer matrix: A review. Mater Sci Eng R 2005; 49: 89–112.

Thostenson

Ren

Chou

. Advances in the science and technology of carbon nanotubes and their composites: A review. Compo Sci Technol 2001; 61: 1899–1912.

Coleman

Khan

Gun’ko

. Mechanical reinforcement of polymers using carbon nanotubes. Adv Mater 2006; 18: 689–706.

10.

Thostenson

Chou

. Processing structure multifunctional property relationship in carbon nanotube/epoxy composites. Carbon 2006; 44: 3022–3029.

11.

Koerner

Liu

Alexander

. Deformation morphology correlations in electrically conductive carbon nanotube thermoplastic polyurethane nanocomposites. Polymer 2005; 46: 4405–4420.

12.

Satapathy

Weidisch

Potschke

. Tough to brittle transition in multiwalled carbon nanotube (MWNT)/polycarbonate nanocomposites. Compos Sci Technol 2007; 67: 867–879.

13.

Trujillo

Arnal

Muller

. Thermal and morphological characterization of nanocomposites prepared by in-situ polymerization of high-density polyethylene on carbon nanotubes. Macromolecules 2007; 40: 6268–6276.

14.

Meincke

Kaempfer

Weickmann

. Mechanical Properties and Electrical Conductivity of Carbon Nanotube Filled Polyamide 6 and its blends with Acrylonitrile/Butadiene/Styrene. Polymer 2004; 45: 739–748.

15.

Gojny

Wichmann

MHG

Fiedler

. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – a comparative study. Compos Sci Technol 2005; 65: 2300–2313.

16.

Peigney

Laurent Ch, Flahaut

. Specific surface area of carbon nanotubes and bundles of carbon nanotubes. Carbon 2001; 39: 507–514.

17.

Zhidong

Alberto

. Thermal conductivity of carbon nanotubes and their polymer Nanocomposites: A review. Prog Poly Sci 2011; 36: 914–944.

18.

Zhang

Shen

Phang

. Carbon nanotubes reinforced nylon-6 composite prepared by simple melt compounding. Macromolecules 2004; 37: 256–259.

19.

Zhu

Kim

Peng

. Improving the dispersion and integration of single walled carbon nanotubes in epoxy composites through functionalization. Nano Lett 2003; 3: 1107–1113.

20.

Gao

Zhao

Itkis

. Chemical engineering of the single walled carbon nanotube nylon 6 interface. J Am Chem Soc 2006; 128: 7492–7496.

21.

Nigrawal

Chand

. Studies on dielectric and a.c. conductivity behavior of activated carbon filled epoxy graded composites. Polym Plast Technol Eng 2011; 50: 547–551.

22.

Wang

Feng

. Preparation and properties of organic rectorite/epoxy resin nano composites. Polym Plast Technol Eng 2012; 51: 1583–1588.

23.

Wang

Zhan

. Mechanical and damping properties of glass fiber and mica reinforced epoxy composites. Polym Plast Technol Eng 2012; 51: 840–844.

24.

Tang

. Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites. Carbon 2010; 48: 1824–1835.

25.

Kevin

White

Sue

. Electrical conductivity and fracture behavior of epoxy/polyamide-12/multiwalled carbon nanotube composites. Poly Eng Sci 2011; 51: 2245–2253.

26.

White

Sue

. Delamination toughness of fiber-reinforced composites containing a carbon nanotube/polyamide-12 epoxy thin film interlayer. Polymer 2012; 53: 37–42.

27.

Hussain ST. Novel catalyst to manufacture carbon nanotubes and hydrogen gas. Patent US 2009208403, 2009.

28.

Kausar A and Hussain ST. Effect of multi-walled carbon nanotubes reinforcement on the physical properties of poly(thiourea-azo-ether)-based nanocomposites. J Plast Film Sheet 2013. DOI: 10.1177/8756087913487003.

29.

Tournus

Latil

Heggie

. π-Stacking interaction between carbon nanotubes and organic molecules. Phys Rev B 2005; 72: 075431–075431.

30.

Grimme

. Do special noncovalent π-π stacking interactions really exist? Angew Chem Int Ed 2008; 47: 3430–3434.

31.

Gunes

Pérez-Bolívar

Jimenez

. Analysis of energy transfer and ternary non-covalent filler/matrix/UV stabilizer interactions in carbon nanofiber and oxidized carbon nanofiber filled poly(methyl methacrylate) composites. Polymer 2011; 52: 5355–5361.

32.

Moniruzzaman

Winey

. Polymer nanocomposites containing carbon nanotubes. Macromolecules 2006; 39: 5194–5205.

33.

Zhou

Wang

. Isothermal crystallization kinetics of polypropylene with silane functionalized multi-walled carbon nanotubes. J Polym Sci B: Polym Phys 2007; 45: 1616–1624.

34.

Shen

Qin

. Dispersion behavior of single-walled carbon nanotubes by grafting of amphiphilic block copolymer. Comp A 2008; 39: 1679–1683.

35.

Špitalský

Matějka

Šlouf

. Modification of carbon nanotubes and its effect on properties of carbon nanotube/epoxy nanocomposites. Polym Compos 2009; 30: 1378–1387.

36.

Buschhorn

Schulte

. The imaging mechanism, imaging depth, and parameters influencing the visibility of carbon nanotubes in a polymer matrix using SEM. Carbon 2011; 49: 1955–1964.

37.

Biercuk

Llaguno

Radosavljevic

. Carbon nanotube composites for thermal management. Appl Phys Lett 2002; 80: 2767–2769.

38.

Yang

CCM

Teng

. Effect of functionalized carbon nanotubes on the thermal conductivity of epoxy composites. Carbon 2010; 48: 592–603.

39.

Zhu

Peng

Rodriguez-Macias

. Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes. Adv Funct Mater 2004; 14: 643–648.

40.

Yanbing

Zhixiong

Ming

. Experimental investigation on the damping behaviour of epoxies with different epoxy value. Polymer Plast Technol Eng 2007; 46: 973–977.

41.

Kausar A and Hussain ST. Synthesis and properties of poly(thiourea-azo-naphthyl)/multiwalled carbon nanotube composites. J Plast Film Sheet 2013. DOI: 10.1177/8756087913483650.