Polypropylene/multiwall carbon nanotube composites with 1, 9, 81, and 729 layers were prepared with a novel microlayer extrusion technology. The influences of multiwall carbon nanotube dispersion and orientation on crystallization behavior, mechanical properties, and thermal stability of composites were investigated. The results indicated that homogeneous dispersion and improved multiwall carbon nanotube orientation in matrix were obtained with more layers. The tensile strength, Young’s modulus, and elongation at break of polypropylene/multiwall carbon nanotube composites with 729 layers increased by 77%, 78%, and 149%, respectively, compared with 1 layer composites. The 81 and 729 layer samples displayed obvious double yielding points on the stress–strain curves. Furthermore, thermogravimetric analysis showed that the composites with more layers exhibited better thermal stability than the 1 layer composites. These results suggest that multiwall carbon nanotube dispersion and orientation in a matrix can be effectively improved through microlayer extrusion.
ParkCOunaiesZWatsonKA. Dispersion of single wall carbon nanotubes by in situ polymerization under sonication. Chem Phys Lett2002; 364: 303–308.
11.
XiaoYZhangXCaoW. Dispersion and mechanical properties of polypropylene/multiwall carbon nanotubes composites obtained via dynamic packing injection molding. J Appl Polym Sci2007; 104: 1880–1886.
12.
PötschkePBrünigHJankeA. Orientation of multiwalled carbon nanotubes in composites with polycarbonate by melt spinning. Polymer2005; 46: 10355–10363.
13.
HaggenmuellerRGommansHHRinzlerAG. Aligned single-wall carbon nanotubes in composites by melt processing methods. Chem Phys Lett2000; 330: 219–225.
14.
FischerDPötschkePBrünigH. Investigation of the orientation in composite fibers of polycarbonate with multiwalled carbon nanotubes by Raman microscopy. Macromol Symp2005; 230: 167–172.
15.
LiSNLiBLiZ. Morphological manipulation of carbon nanotube/polycarbonate/polyethylene composites by dynamic injection packing molding. Polymer2006; 47: 4497–4500.
16.
LinYHiltnerABaerE. A new method for achieving nanoscale reinforcement of biaxially oriented polypropylene film. Polymer2010; 51: 4218–4224.
17.
XuSWenMLiJ. Structure and properties of electrically conducting composites consisting of alternating layers of pure polypropylene and polypropylene with a carbon black filler. Polymer2008; 49: 4861–4870.
18.
LinYHiltnerABaerE. Nanolayer enhancement of biaxially oriented polypropylene film for increased gas barrier. Polymer2010; 51: 5807–5814.
19.
GuptaMLinYJDeansT. Structure and gas barrier properties of poly(propylene-graft-maleic anhydride)/phosphate glass composites prepared by microlayer coextrusion. Macromolecules2010; 43: 4230–4239.
20.
WangHKeumJKHiltnerA. Confined crystallization of polyethylene oxide in nanolayer assemblies. Science2009; 323: 757–760.
21.
LangheDSHiltnerABaerE. Melt crystallization of syndiotactic polypropylene in nanolayer confinement impacting structure. Polymer2011; 52: 5879–5889.
22.
LangheDSKeumJKHiltnerA. Fractionated crystallization of α- and β-nucleated polypropylene droplets. J Polym Sci Pol Phys2011; 49: 159–171.
AlfereyTGurneeEFSchrenkWJ. Physical optics of iridescent multilayered plastic films. Polym Eng Sci1969; 9: 400–404.
25.
ImJSchrenkWJ. Coextruded Microlayer Film and Sheet. J Plast Film Sheet1988; 4: 104–115.
26.
LiuRYFBernal-LaraTEHiltnerA. Polymer interphase materials by forced assembly. Macromolecules2005; 38: 4819–4827.
27.
BaerEHiltnerAKeithHD. Hierarchical structure in polymeric materials. Science1987; 235: 1015–1022.
28.
LeePCDooleyJRobackiJ. Improvements in flex oxygen barrier properties of polymeric films by microlayer coextrusion. J Plast Film Sheet2013; 30: 234–247.
29.
LeePCDooleyJ. Experimental and numerical analysis of micro/nanolayer coextrusion. J Plast Film Sheet2012; 29: 78–98.
30.
WenMSunXSuL. The electrical conductivity of carbon nanotube/carbon black/polypropylene composites prepared through multistage stretching extrusion. Polymer2012; 53: 1602–1610.
31.
ShenJLiJGuoS. The origin of a new transition in dynamic mechanical spectra of multilayer polymeric composite. Polymer2012; 53: 2519–2523.
32.
XiongLYangWLiC. Plasticizer migration from micro-layered flexible poly (vinyl chloride) films prepared by multi-layer co-extrusion technology. J Plast Film Sheet2015; 32: 402–418.
33.
Yang W. Apparatus and method for preparing laminated nano-composite material. Patent CN200910237622.5, 2009.
34.
JiangSQiaoCTianS. Confined crystallization behavior of PEO in organic networks. Polymer2001; 42: 5755–5761.
35.
QiuFWangMHaoYB. The effect of talc orientation and transcrystallization on mechanical properties and thermal stability of the polypropylene/talc composites. Compos Part A2014; 58: 7–15.
36.
SandlerJShafferMSPPrasseT. Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties. Polymer1999; 40: 5967–5971.
37.
RenWCChengHM. Aligned double-walled carbon nanotube long ropes with a narrow diameter distribution. J Phys Chem B2005; 109: 7169–7173.
38.
VoyiatzisGAAndrikopoulosKSPapatheodorouGN. Polarized resonance Raman and FTIR reflectance spectroscopic investigation of the molecular orientation in industrial poly(vinyl chloride) specimens. Macromolecules2000; 33: 5613–5623.
39.
ShenJChampagneMFGendronR. The development of conductive carbon nanotube network in polypropylene-based composites during simultaneous biaxial stretching. Eur Polym J2012; 48: 930–939.
40.
MarcoCNaffakhMGómezMA. The crystallization of polypropylene in multiwall carbonnanotube-based composites. Polym Compos2011; 32: 324–333.
41.
SaujanyaCRadhakrishnanS. Structure development and crystallization behaviour of PP/nanoparticulate composite. Polymer2001; 42: 6723–6731.
42.
ZhuYDuZLiH. Preparation and crystallization behavior of multiwalled carbon nanotubes/poly(vinyl alcohol) nanocomposites. Polym Eng Sci2011; 51: 1770–1779.
43.
PodsiadloPKaushikAKArrudaEM. Ultrastrong and stiff layered polymer nanocomposites. Science2007; 318: 80–83.
44.
RussoGMSimonGPIncarnatoL. Correlation between rheological, mechanical, and barrier properties in new copolyamide-based nanocomposite films. Macromolecules2006; 39: 3855–3864.
