Abstract
The research effort oriented towards the modelling of metal powder compaction necessitates laborious experimental work to validate theoretical assumptions. Many interesting experimental setups have been reported in the literature. However, results obtained from a setup can be significantly different from others leading to divergent efforts and conclusions. This paper will present and compare part of the experimental work done on powder cold compaction in the last 20 years. Some of the experimental setups that will be reviewed are the combined hydrostatic-uniaxial press, the angled blocks setup and the precompacted method. PM/1071
Get full access to this article
View all access options for this article.
References
1.
Drucker
D. C.
and
PRAGER
W.
Q. Appl. Math ., 1952 , 10 , 157 –165 .
2.
Dimaggio
F. L.
and
SANDLER
I. S.
ASCE J. Eng. Mech ., 1971 , 935-96 0 .
3.
Roscoe
K. H.
and
BURLAND
J. B.
Eng. Past ., 1968 , 535-60 9 .
4.
Gurson
A. L.
: Trans. ASME , J. Eng. Mater. Tech ., 1977 , 99 , 2 –15 .
5.PM MODNET COMPUTER MODELLING GROUP : Powder Me tall. , 42, (4) , 301 –311 .
6.
Brown
S.
and
ABOU-CHEDID
G.
J. Mech. Phys. Solids , 1994 , 42 , (3 ), 383 –399 .
7.
Watson
T. J.
and
WERT
J. A.
Metall. Trans A , 1993 , 24A , 2071 –2081 .
8.
Delo
D. P.
and
PIEHLER
H. R.
‘Advances in powder metallurgy and particulate materials’, Vol. 2, 5.113-5.124; 1995, Princeton, NJ, MPIF.
9.
Delo
D. P.
,
DUTTON
R. E.
,
SEMIATIN
S. L.
and
PIEHLER
H. R.
Acta Mater ., 1999 , 47 , (11 ), 3159 –3167 .
10.
Meerman
W. C. P. M.
and
KNAAPEN
A. C.
Powder Technol , 1979 , 22 , 271 –278 .
11.
Shima
S.
and
MIMURA
K.
Int. J. Mech. Sci ., 1986 , 28 , (1 ), 53 –59 .
12.
Akisanya
A. R.
,
COCKS
A. C. F.
and
FLECK
N. A.
Int. J. Mech. Sci ., 1997 , 39 , (12 ), 1315 –1324 .
13.
Doremus
P.
,
GEINDREAU
C.
,
MARTIN
A.
,
DEBOVE
L.
,
LECOT
R.
and
DAO
M.
Powder Metall ., 1995 , 38 , (4 ), 284 –287 .
14.
Brochu
M.
and
TURENNE
S.
‘Advances in powder metallurgy and particulate materials’, 1.39-1.49; 2000, Princeton, NJ, MPIF.
15.
Brown
S.
and
ABOU-CHFDID
G.
Scr. Metall ., 1993 , 28 , (1 ), 11 –16 .
16.
Pavier
E.
and
DOREMUS
P.
Powder Metall ., 1999 , 42 , (4 ), 345 –352 .
17.
Panelli
R.
and
FILHO
F. AMNROZIO
Powder Metall ., 1998 , 41 , (2 ), 131 –133 .
18.
Rong-De
G.
: Int. J. Powder Metall ., 1991 , 27 , (3 ), 211 –216 .
19.
Shapiro
I.
: ‘Advances in powder metallurgy and particulate materials’, Vol. 1, 2.97-2.114; 1995, Princeton, NJ, MPIF.
20.
Shima
S.
and
KOTERA
H.
‘Advances in powder metallurgy and particulate materials’ , Vol. 7 , 71 –82 ; 1994 , Princeton , NJ, MPIF.
21.
Shima
S.
,
KOTERA
H.
,
HONG
Z.
and
FUNATO
M.
‘Advances in powder metallurgy and particulate materials’, Vol. 2, 7.193-7.205; 1996, Princeton, NJ, MPIF.
22.
Saleh
M. A. E.
and
SHIMA
S.
J. Jpn , Soc. Powder Powder Metall ., 1994 , 41 , (12 ), 1541 –1546 .
23.
Tszeng
T. C.
and
WU
W. T.
Acta Mater ., 1996 , 44 , (9 ), 3543 –3552 .