Abstract
A low alloy steel (T11) has been bonded to an austenitic stainless steel 347H by hot coextrusion under industrial conditions. The final product was a seamless bimetallic tube with 347H cladding the exterior for corrosion resistance in severely corrosive environments at high temperatures. The microstructures of the coextruded bonding have been compared to those obtained in the laboratory, after diffusion bonding experiments, using hot isostatic pressing (hipping). In all cases both the interdiffusion of the different elements across the interface and the microstructure have been analysed by optical microscopy, SEM, and TEM. On the 347H side a profuse precipitation, mainly of NbC, was found in a region near the interface. Only in the hipped specimens, as result of nickel and chromium diffusion from the stainless steel to the T11 steel, a martensite band was observed parallel to the interface. The heat treatment performed on the bimetallic tubes, to obtain the optimum combination of mechanical properties and corrosion resistance, consisted of austenitisation between 1050–1100°C, water quenching, and a stabilisation treat ment at 850–900°C, followed by slow cooling.
Get full access to this article
View all access options for this article.