Cavitation studies in materials: New insights from modern techniques in 2D/3D/4D characterisation

Abstract

Get full access to this article

View all access options for this article.

References

Smith

and Barnby

: ‘Nucleation of grain boundary cavities during high temperature creep’, Met. Sci., 1967, 1, 1–4.

Francis

, Mazur

, and Bhadeshia

HKDH

: ‘Review of type IV cracking in ferritic power plant steels’, Mater. Sci. Technol., 2006, 22, 1387–1395.

Abe

, Tabuchi

, Tsukamoto

and Shirane

: ‘Microstruture evolution in HAZ and suppression of type IV fracture in advanced ferritic power plant steels’, Int. J. Press. Vessels Pip., 2010, 87, 598–604.

Schlacher

, Pelzmann

, Beal

, Sommitsch

, Gupta

, Toda

and Mayr

: ‘Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography’, Mater. Sci. Technol., 2015, 31, 516–521.

Burnett

, Geurts

, Jazaeri

, Northover

, McDonald

, Haigh

, Bouchard

and Withers

: ‘Multiscale 3D analysis of creep cavities in AISI 316 stainless steel’, Mater. Sci. Technol., 2015, 31, 522–534.

Jazaeri

, Bouchard

, Hutchings

, Mamun

and Heenan

: ‘Application of small angle neutron scattering to study creep cavitation in stainless steel weldments’, Mater. Sci. Technol., 2015, 31, 535–539.

Abbasi

, Dziecol

and Borbelry

: ‘Three-dimensional analysis of creep voids in copper by serial sectioning combined with large field EBSD’, Mater. Sci. Technol., 2015, 31, 540–546.

Yardley

, Fahimi

, and Payton

: ‘Classification of creep crack and cavitation sites in the tempered martensitic ferritic steel microstructure using MTEX toolbox for EBSD’, Mater. Sci. Technol., 2015, 31, 547–553.

Yadav

, Sonderegger

, Sartory

, Sommitsch

and Poletti

: ‘Characterisation and quantification of cavities in a 9Cr martensitic steel for power plants’, Mater. Sci. Technol., 2015, 31, 554–564.

10.

Campbell

: ‘Entrainment defects’, Mater. Sci. Technol., 2006, 22, 127–145.

11.

Campbell

: ‘Cavitation in liquid and solid metals’, Mater. Sci. Technol., 2015, 31, 565–572.

12.

Chapman

, Silva

, Williams

, Chawla

and Xiao

: ‘Characterisation of thermal cycling induced cavitation in particle reinforced metal matrix composites by three dimensional (3D) X-ray synchrotron micro-tomography’, Mater. Sci. Technol., 2015, 31, 573–578.

13.

Ferre

, Dancette

, and Maire

: ‘Damage characterisation in aluminium matrix composites reinforced with amorphous metal inclusions’, Mater. Sci. Technol., 2015, 31, 579–586.

14.

Sket

, Rodriguez-Hortala

, Molina-Aldareguia

, Llorca

, Maire

and Requena

: ‘In situ tomographic investigation of damage development in ±45° carbon fibre reinforced laminates’, Mater. Sci. Technol., 2015, 31, 587–593.

15.

Gupta

, van de Casteele

, Wever

, Hoshino

, Kobayashi

, and Biswas

: ‘Quantitative 3D characterisation of porous NiTi fabricated by self-propagating high temperature synthesis using X-ray micro-tomography’, Mater. Sci. Technol., 2015, 31, 594–602.

16.

Gupta

, Toda

, Mayr

, and Sommitsch

: ‘The 3D nature of creep cavitation and its implications for residual life estimation methods in heat resistant steels: a critical review’, Mater. Sci. Technol., 2015, 31, 603–626.