Induction welding and heat treatment of steel pipes: Evolution of crystallographic texture detrimental to toughness

Abstract

Steel welding using induction heating to produce pipelines is found to have lower toughness at the weld junction than the base material, even after a heat treatment which reaustenitises the weld zone. Detailed crystallographic characterisation indicates that the poor toughness is due to the crystallographically coarse grains present after welding; the coarse scale is not visible using just optical microscopy. The post-weld heat treatment does not improve the situation at the weld junction, because the detrimental crystallographic characteristics are reproduced on cooling.

Keywords

STEEL PIPELINE INDUCTION WELDING TOUGHNESS CRYSTALLOGRAPHY

Get full access to this article

View all access options for this article.

References

Durand

, Coupard

, Goetz

and Girot

: ‘Determination of optimal brazing frequency by solution of thermal and electromagnetic models’, Sci. Technol. Weld. Join., 2001, 6, 177–181.

Saida

, Jeong

and Nishimoto

: ‘Development of hyperinterfacial bonding technique for ultra-fine grained steels and microstructural analysis of bonded joints’, Sci. Technol. Weld. Join., 2004, 9, 548–554.

Mikami

, Shirakawa

, Fujimoto

, Hamaguchi

and Yasamura

: ‘Development of new hot-welded steel pipe-making process’, ISIJ Int., 1991, 31, 635–639.

Houghton

K. D.

: ‘Welded linepipe for offshore sour service applications’, J. Offshore Technol., 1995, 3, 46–48.

Kim

H.-J.

and Youn

S.-K.

: ‘Three dimensional analysis of high frequency induction welding of steel pipes with impeder’, J. Manuf. Sci. Eng., 2008, 130, 0310051–0310057.

AWS: ‘High frequency welding’, in ‘Welding handbook’ , 156; 1982, Miami, FL, AWS.

Shiga

, Kamada

, Hatomura

, Hirose

, Junichi

and Sekine

: ‘Development of large diagmeter high strength line pipes for low temperature services’, Technical report 4, Kawasaki Steel Technical Report, 97–109, Kawasaki Steel, Tokyo, Japan, 1981.

Wang

J. Q.

, Atrens

, Cousens

D. R.

and Kinaev

: ‘Microstructure of X52 and X65 pipeline steels’, J. Mater. Sci., 1999, 34, 1721–1728.

Zhao

M. C.

, Yang

, Xiao

F. R.

and Shan

Y. Y.

: ‘Continuous cooling transformation of undeformed and deformed low carbon pipeline steels’, Mater. Sci. Eng. A, 2003, A355, 126–136.

10.

Treiss

: ‘Induction annealing of welds in the fabrication of high-frequency induction welded steel line pipes’, 3R Int., 1981, 20, (11), 627–630.

11.

Williams

J. G.

, Killmore

C. R.

, Barbaro

F. J.

, Piper

and

Fletcher: ‘High strength erw linepipe manufacture in australia’, Mater. Forum, 1996, 20, 13–28.

12.

Pradhan

, Banerjee

, Reddy

B. B.

, Sahay

S. K.

, Basu

D. S.

, Bhor

P. K.

, Das

and Bhattyacharya

: ‘Control of defects during continuous casting of line pipe (API) quality steels’, Scand. J. Metall., 2005, 34, 232–240.

13.

: ‘Metallographic examination evaluation criteria and control for ERW pipe production’, Tube Int., Mar. 1996, 153–155.

14.

Thewlis

: ‘Weldability of X100 linepipe’, Sci. Technol. Weld. Join., 2000, 5, 365–377.

15.

Faes

, Dhooge

, de Baet

and Afschrift

: ‘Influence of deceleration phase on properties of friction welded pipelines using intermediate ring’, Sci. Technol. Weld. Join., 2008, 13, 136–145.

16.

Magudeeswaran

, Balasubramanian

T. S.

and Reddy

G. M.

: ‘Effect of welding consumables on tensile and impact properties of shielded metal arc welded high strength, quenched and tempered steel joints’, Sci. Technol. Weld. Join., 2008, 13, 97–105.

17.

Militzer

, Pandi

and Hawbolt

E. B.

: ‘Ferrite nucleation and grouth during continuous cooling’, Metall. Trans. A, 1996, 27A, 1547–1556.

18.

Yan

, Güngör

Ö. E.

, Thibaux

and Bhadeshia

H. K. D. H.

: ‘Induction-welded and heat-treated pipeline steel’, Adv. Mater. Res., 2010, 651–656.

19.

Lambert-Perlade

, Gourgues

A. F.

and Pineau

: ‘Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel’, Acta Mater., 2004, 52, 2337–2348.

20.

Bhattacharjee

, Knott

J. F.

and Davis

C. L.

: ‘Charpy-impact-toughness prediction using an ‘effective’ grain size for thermo- mechanically controlled rolled microalloyed steels’, Metall. Mater. Trans. A, 2004, 35A, 121–130.

21.

Kim

Y. M.

, Shin

S. Y.

, Lee

, Wang

, Lee

and Kim

N. J.

: ‘Effects of molybdenum and vanadium addition on tensile and charpy impact properties of API X70 linepipe steels’, Metall. Mater. Trans. A, 2007, 38A, 1731–1742.

22.

Dingley

D. J.

and Nowell

M. M.

: ‘The use of electron backscatter diffraction for the investigation of nano crystalline materials and the move towards orientation imaging in the TEM’, Microchim. Acta, 2004, 147, 157–165.

23.

Humphreys

F. J.

: ‘Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD)’, Scr. Mater., 2004, 51, 771–776.

24.

Gourgues-Lorenzon

A. F.

: ‘Application of electron backscatter diffraction to the study of phase transformations’, Int. Mater. Rev., 2007, 52, 65–128.

25.

Mujica

, Weber

, Thomy

and Vollertsen

: ‘Microstructure and mechanical properties of laser welded austenitic high manganese steels’, Sci. Technol. Weld. Join., 2009, 14, 517–522.

26.

Tyson

W. R.

, Ayres

R. A.

and Stein

D. F.

: ‘Anisotropy of cleavage in BCC transition metals’, Acta Metall., 1973, 21, 621–627.

27.

Goritskii

V. M.

and Khromov

D. P.

: ‘Crystallographic direction of brittle transcrystalline cleavage in the ferrite of low-carbon low-alloy steels’, Probl. Proch., 1984, 6, 81–82.

28.

Shin

S. Y.

, Han

S. Y.

, Hwang

, Lee

C. G.

and Lee

: ‘Effects of Cu and B addition on microstructure and mechanical properties of high-strength bainitic steels’, Mater. Sci. Eng. A, 2009, A517, 212–218.