Effect of reduced or zero pin length and anvil insulation on friction stir spot welding thin gauge 6111 automotive sheet

Abstract

Friction stir spot welding (FSSW) is a relatively new process, which has not yet been fully optimised. The aim of the work presented was to investigate the influence of pin length and an insulating anvil on FSSW thin (0·9 mm) 6111-T4 aluminium automotive closure panels. A pinless, or ‘zero pin length’, tool was also tested. With a normal pin tool and a steel anvil the optimum pin length was found to be considerably shorter than conventionally used, being in the range 0·7–1 mm, as opposed to ∼1·4 mm. The insulated anvil increased the peak temperature in the bottom sheet by 45°C, but there was a 15% reduction in lap shear strength when used with a conventional pin tool. In the case of the pinless tool, successful welds were produced with comparable strengths to the highest values measured with the optimum conventional tool without a retained weld keyhole or top sheet thinning (hooking).

Keywords

FRICTION STIR SPOT WELDING PINLESS TOOL AA6111 THERMAL CONTROL SHEAR STRENGTH LAP JOINTS

Get full access to this article

View all access options for this article.

References

Sakaguchi

: J. Light Met. Weld. Constr., 1979, 17, (3), 291–297.

Peng

, Fukumoto

, Brown

and Zhou

: Sci. Technol. Weld. Join., 2004, 9, 331–336.

Harsha

, Hunt

and Okamoto

: in ‘Friction stir welding and processing’, (ed. R. S. Mishra and M. W. Mahoney), 235–272; 2007, Metals Park, OH, ASM International.

Barnes

T. A.

and Pashby

I. R.

: J. Mater. Process. Technol., 2000, 99, (1–3), 62–71.

Barnes

T. A.

and Pashby

I. R.

: J. Mater. Process. Technol., 2000, 99, (1–3), 72–79.

Jahn

, Cooper

and Wilkosz

: Metall. Mater. Trans. A, 2007, 38A, 570–583.

Sakano

, Murakami

, Yamashit

, Hyoe

, Fujimoto

, Inuzuka

, Nagao

and Kashiki

: Proc. 3rd Int. FSW Sym., Kobe, Japan, September 2001, TWI, CD-ROM.

Iwashita

: ‘Method and apparatus for joining’, US patent no. 6601751, 2003. 9. J. Mortimer: Int. J. Ind. Robot, 2004, 31, (5), 423–428.

Thomas

W. M.

, Nicholas

E. D.

, Needham

J. D.

, Murc

M. G.

, Temple-Smith

and Daws

C. J.

: ‘Friction welding’, GB patent application no. 9125978·8, 1991; US patent no. 5460317, 1995.

10.

Hancock

: Weld. J., 2004, 83, (2), 40.

11.

Mazda: the Aluminium Association, http://www.aluminium.org/AM/Template.cfm?Section=Home&template=/CM/HTMLDisplay.cfm& ContentID

5211 67

12.

Mitlin

V. Radmilovic, T. Pan, J. Chen, Z. Feng and M. L. Santella: Mater. Sci. Eng. A, 2006, A441, (1–2), 79–76.

13.

Lin

P. C.

, Pan

and Pan

: Int. J. Fatigue, 2008, 30, (1), 74–89.

14.

Lin

P. C.

, Pan

and Pan

: Int. J. Fatigue, 2008, 30, (1), 90–105.

15.

Gerlich

, Su

and North

T. H.

: J. Mater. Sci., 2005, 40, 6473–6481.

16.

Gerlich

, Su

and North

T. H.

: Metall. Mater. Trans. A, 2006, 37A, 2773–2786.

17.

, Gerlich

, North

T. H.

and Bendzsak

G. J.

: Sci. Technol. Weld. Join., 2004, 11, 163–169.

18.

Tozaki

, Uematsu

and Tokaji

: Int. J. Mach. Tools Manuf., 2007, 47, (15), 2230–2236.

19.

Bakavos

and Prangnell

P. B.

: Proc. 7th Int. FSW Sym., Awaji Island, Japan, May 2008, TWI, CD-ROM.

20.

Badarinarayan

, Yang

and Zhu

: Int. J. Mach. Tools Manuf., 2009, 49, 142–148.

21.

Okamoto

, Hunt

and Hirano

: ‘Development of friction stir welding technique and machine for aluminum sheet metal assembly – friction stir welding of aluminum for automotive’, SAE Technical Series 2005-01-1254, 2005.

22.

Gerlich

, Su

, Yamamoto

and North

T. H.

: J. Mater. Sci., 2007, 42, 5589–5601.

23.

, Gerlich

, North

T. H.

and Bendzsak

G. J.

: ‘Energy generation and stir zone dimensions in friction stir spot welds’, SAE Technical Series 2006–01–0971, 2006.

24.

Wang

, Mucino

V. H.

, Feng

and David

S. A.

: ‘Modeling of friction stir spot welding process’, SAE Technical Series 2005-01-1251, 2005.

25.

Schilling

C and J. F. dos Santos: ‘Method and device for joining at least two adjoining work pieces by friction welding’, US patent no. 6722556 B2, 2004.

26.

Tier

1, T. Rosendo, C. W. Olea, C. Mazzaferro, F. D. Ramos, M. Bayer, J. F. dos Santos, A. A. M. da Silva, J. Mazzaferro and T. R. Strohaecker: Proc. 7th Int. FSW Sym., Awaji Island, Japan, May 2008, TWI, CD-ROM.

27.

Uematsu

, Tokaji

, Tozaki

, Kurita

and Murata

: Int. J. Fatigue, 2008, 30, 1956–1966.

28.

Addison

A. C.

and Robelou

A. J.

: Proc. 5th Int. FSW Sym. Metz, France, September 2004, TWI, CD-ROM.

29.

Tweedy

B. M.

: Proc. 7th Int. FSW Sym., Awaji Island, Japan, May 2008, TWI, CD-ROM.

30.

Miyagawai

, Matsumural

, Yasui

, Tsubaki

and Fukumoto

: Proc. 7th Int. FSW Sym., Awaji Island, Japan, May 2008, TWI, CD-ROM.

31.

Gross

, Tweedy

and Widener

: ‘Development of an end-effector for friction stir spot welding’, SAE Technical Series, 2008-01-2286, 2008.

32.

Huang

and Humphreys

F. J.

: Mater. Charact., 2001, 47, 235–240.

33.

Gerlich

, Yamamoto

and North

T. H.

: J. Mater. Sci., 2008, 43, 2–11.

34.

Gerlich

, Yamamoto

and North

T. H.

: Metal. Mater. Trans., 2006, 38, (6), 1291–1302.

35.

Uematsu

and Tokaji

: Sci. Technol. Weld. Join., 2009, 14, (1), 61–71.

36.

http://www.thermotech.co.uk/consult.html

37.

Mishra

R. S.

and Ma

Z. Y.

: Mater. Sci. Eng. R, 2005, R50, (1–2), 1–78.

38.

Sullivan

and Robson

: Mater. Sci. Eng. A, 2008, A478, (1–2), 351–360.

39.

Kamp

, Sullivan

and Robson

J. D.

: Mater. Sci. Eng., 2007, 467, (1–2), 246–255.

40.

A. A.

Hassan

P. B.

Prangnell

A. F.

Norman

D. A

. Price and S. W. Williams: Sci. Technol. Weld. Join., 2003, 8, 257–268.

41.

Staley

J. T.

: Proc. 3rd Int. Conf. on ‘Aluminum alloys’, Trondheim, Norway June 1992, The Norwegian Institute of Technology and SINTEF Metallurgy, 107–143.

42.

Prangnell

P. B.

, Heason

C. P.

and Colligan

K. J.

: Int. J. Offshore PolarEng., 2004, 14, 289–295.

43.

Prangnell

P. B.

and Heason

C. P.

: Acta Mater., 2005, 53, 3179–3192.