Microstructure and mechanical properties of dissimilar welded Mg–Al joints by ultrasonic spot welding technique

Dissimilar spot welds of magnesium–aluminium alloy were produced via a solid state welding process, i.e. ultrasonic spot welding, and a sound joint was obtained under most of the welding conditions. It was observed that a layer of intermetallic compound (IMC) consisting of Al₁₂M₁₇ formed at the weld centre where the hardness became higher. The lap shear strength and failure energy of the welds first increased and then decreased with increasing welding energy, with the maximum lap shear strength and failure energy occurring at ∼1250 J. This was a consequence of the competition between the increasing diffusion bonding arising from higher temperatures and the deterioration effect of the intermetallic layer of increasing thicknesses. Failure predominantly occurred in between the aluminium alloy and the intermetallic layer, which normally stayed at the magnesium side or from the cracks of the IMCs in the reaction layer.