A new approach for calculating the influence of droplets on the arc and weld pool in gas metal arc welding is presented. A three-dimensional self-consistent model of the arc, workpiece and electrode that includes the influence of metal vapour is used to track the temperature, velocity and diameter of a droplet as it detaches and passes through the arc. The time averaged influence of the droplet on the arc and weld pool is then calculated. The approach allows very large savings of computational time compared to the usual volume of fluid method. The approach has been applied to one-drop per pulse welding of aluminium. Weld pool depth and shape were predicted accurately. The enthalpy transferred to the weld pool was found to have a strong influence on weld pool depth, while the flow in the weld pool depends on the momentum transferred by the droplet and the magnetic pinch force.
HaidarJ: ‘An analysis of the formation of metal droplets in arc welding’, J. Phys. D: Appl. Phys., 1998, 31D, 1233–1244.
2.
WangF, HouWK, HuSJ, Kannatey-AsibuE, SchultzWW, WangPC: ‘Modelling and analysis of metal transfer in gas metal arc welding’, J. Phys. D: Appl. Phys., 2003, 36D, 1143–1152.
3.
FanHG, KovacevicR: ‘A unified model of transport phenomena in gas metal arc welding including electrode, arc plasma and molten pool’, J. Phys. D: Appl. Phys., 2004, 37D, 2531–2544.
4.
ZhuFL, TsaiHL, MarinSP, WangPC: ‘A comprehensive model on the transport phenomena during gas metal arc welding process’, Prog. Comput. Fluid Dynam., 2004, 4, 99–117.
5.
HuJ, TsaiHL: ‘Heat and mass transfer in gas metal arc welding. Part I: The arc’, Int. J. Heat Mass Transfer, 2007, 50, 833–846.
6.
HuJ, TsaiHL: ‘Heat and mass transfer in gas metal arc welding. Part II: The metal’, Int. J. Heat Mass Transfer, 2007, 50, 808–820.
7.
XuG, HuJ, TsaiHL: ‘Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding’, Int. J. Heat Mass Transfer, 2009, 52, 1709–1724.
8.
SchnickM, FuesselU, HertelM, HaesslerM, Spille-KohoffA, MurphyAB: ‘Modelling of gas–metal arc welding taking into account metal vapour’, J. Phys. D: Appl. Phys., 2010, 43D, 434008.
9.
MurphyAB: ‘The effects of metal vapour in arc welding’, J. Phys. D: Appl. Phys., 2010, 43D, 434001.
10.
MurphyAB: ‘A self-consistent three-dimensional model of the arc, electrode and weld pool in gas–metal arc welding’, J. Phys. D: Appl. Phys., 2011, 44D, 194009
11.
MurphyAB: ‘Diffusion in equilibrium mixtures of ionized gases’, Phys. Rev. E, 1993, 48E, 3594–3603.
12.
MurphyAB: ‘Thermal plasmas in gas mixtures’, J. Phys. D: Appl. Phys., 2001, 34D, R151–R173.
13.
BarrettJ, ClementC: ‘Kinetic evaporation and condensation rates and their coefficients’, J. Colloid Interface Sci., 1992, 150, 352–364.
14.
HaidarJ: ‘The dynamic effects of metal vapour in gas metal arc welding’, J. Phys. D: Appl. Phys., 2010, 43D, 165204.
15.
LinQ, LiX, SimpsonSW: ‘Metal transfer measurements in gas metal arc welding’, J. Phys. D: Appl. Phys., 2001, 34D, 347–353.
16.
CroweCT, SharmaMP, StockDE: ‘The particle-source-in cell (PSI-CELL) model for gas-droplet flows’, J. Fluid. Eng., 1977, 99, 325–332.
17.
LeeYC, HsuKC, PfenderE: ‘Modeling of particles injected into a d.c. plasma jet’, Proc. 5th Int. Symp. on ‘Plasma chemistry’, Edinburgh, UK, August 1981, Heriot-Watt University, Vol. 2, 795–802.
ChyouYP, PfenderE: ‘Behavior of particulates in thermal plasmas’, Plasma Chem. Plasma Process., 1989, 9, 45–71.
20.
KimJ.-W, NaS.-J: ‘A study on the effect of contact tube-to-workpiece distance on weld pool shape in gas metal arc welding’, Weld. J., 1995, 74, 141s–152s.
21.
WuCS, ChenJ, ZhangYM: ‘Numerical analysis of both front- and back-side deformation of fully-penetrated GTAW weld pool surfaces’, Comput. Mater. Sci., 2007, 39, 635–642.
22.
CramLE: ‘Statistical evaluation of radiative power losses from thermal plasmas due to spectral lines’, J. Phys. D: Appl. Phys., 1985, 18D, 401–411.
23.
EssoltaniA, ProulxP, BoulosMI, GleizesA: ‘Volumetric emission of argon plasmas in the presence of vapors of Fe, Si and Al’, Plasma Chem. Plasma Process., 1994, 14, 437–450.
24.
GleizesA, CressaultY, TeuletP: ‘Mixing rules for thermal plasma properties in mixtures of argon, air and metallic vapours’, Plasma Sources Sci. Technol., 2010, 19, 055013.
25.
PatankarSV: ‘Numerical heat transfer and fluid flow’; 1980, Washington, DC, Hemisphere.
26.
SchnickM, FüsselU, HertelM, Spille-KohoffA, MurphyAB: ‘Metal vapour causes a central minimum in arc temperature in gas-metal arc welding through increased radiative emission’, J. Phys. D: Appl. Phys., 2010, 43D, 022001.
