The consumable and non-consumable electrode indirect arc droplet welding is a novel method that applies an indirect arc generated between a consumable electrode and a non-consumable electrode to welding. It was successfully used to overlap join the thin zinc coated steel plate. In the point to point (consumable electrode and non-consumable electrode) configuration, the stable metal transfer was obtained. The globular, projected spray and streaming spray transfer modes were promoted. With the increase in welding power, the metal transfer became faster and more stable. At the same time, the indirect arc became brighter, smaller and more stable. The arc self-regulation guaranteed the stable burning of the indirect arc. The desire stability was observed from the fluctuation of the welding current and the arc voltage waveforms. The side concentrated melting on the root of the droplet produced high pinch effect, which facilitated the detachment of the droplet.
DengD, MurakawaH, MaM: ‘Predicting welding deformation in thin plate panel structure by means of inherent strain and interface element’, Sci. Technol. Weld. Join., 2012, 17, (1), 13–21.
2.
TriyonoT, JamasriJ, IlmanMN, SoekrisnoR, SutiarsoS: ‘Assessment of nugget size of spot weld using neutron radiography’, Atom Indonesia J., 2011, 37, (2), 71–72.
3.
ZhangL, JiS, GuanL, DongC, FuL: ‘Friction stir welding of Al alloy thin plate by rotational tool without pin’, J. Mater. Sci. Technol., 2011, 27, (7), 647–652.
4.
BiswasP, MandalNR, DasS: ‘Prediction of welding deformations of large stiffened panels using average plastic strain method’, Sci. Technol. Weld. Join., 2011, 16, (3), 227–231.
5.
ZhangWH, QiuXM, SunDQ, HanLJ: ‘Effects of resistance spot welding parameters on microstructures and mechanical properties of dissimilar material joints of galvanised high strength steel and aluminium alloy’, Sci. Technol. Weld. Join., 2011, 16, (2), 153–161.
6.
Mahmoudi GhaznaviM, EkramiA, KokabiAH: ‘Effect of solidification mechanism on microstructure and mechanical properties of joint in TLP bonded Al2024-T6 alloy’, Sci. Technol. Weld. Join., 2011, 16, (2), 174–180.
7.
ChenYB, ZhaoYB, LeiZL, LiLQ: ‘Effects of laser induced metal vapour on arc plasma during laser arc double sided welding of 5A06 aluminium alloy’, Sci. Technol. Weld. Join., 2012, 17, (1), 69–76.
8.
XuD, LiuXS, WangP, YangJG, FangHY: ‘New technique to control welding buckling distortion and residual stress with non-contact electromagnetic impact’, Sci. Technol. Weld. Join., 2009, 14, (8), 753–759.
9.
ColegroveP, KeaguC, ThistlethwaiteA, WilliamsS, NagyT, SuderW, SteuwerA: ‘Welding process impact on residual stress and distortion’, Sci. Technol. Weld. Join., 2009, 14, (8), 717–725.
10.
OgawaY: ‘High speed imaging technique. Part 1: high speed imaging of arc welding phenomena’, Sci. Technol. Weld. Join., 2011, 16, (1), 33–43.
11.
ZhangHT, FengJC, HeP, HacklH: ‘Interfacial microstructure and mechanical properties of aluminium zinc-coated steel joints made by a modified metal inert gas welding of brazing process’, Mater. Charact., 2007, 58, 588–592.
12.
JahrsdoerferB, EsserG, GeigerM, GovekarE: ‚Laser droplet weld: an innovative joining technology opens new application possibilities’, Proc. SPIE, 2003, 4977, 518.
