DP980 dual phase and high strength low alloy (HSLA) steels were welded, using fibre laser, with varying amounts of concavity to determine its effects on the tensile and fatigue properties. Higher concavity, 25 to 35%, was observed to reduce the tensile strength of the DP980 welds, while not affecting the tensile strength of HSLA welds. All welds exhibited lower fatigue resistance compared to their base metals. However, DP980 welds with higher concavity (25 to 35%) exhibited even lower fatigue resistance while HSLA welds showed similar performance regardless of changes in concavity. Concavity could be minimised by reducing welding power and increasing the welding speed.
Auto/Steel Partnership: ‘Advanced high strength steel applications, design and stamping process guidelines’, Southfield, MI, Jan 2010, e-book available at: http://www.a-sp.org
2.
World Auto Steel: ‘Advanced high strength steel (AHSS) application guidelines’, Version 4·1, 1–30; June 2009, e-book available at: www.worldautosteel.org
3.
Campbell,F. C. (ed.): ‘Elements of metallurgy and engineering alloys’, 387–391; 2008, Materials Park, OH, ASM International.
4.
Bhadeshia,H. K. D. H. and Honeycombe,R. W. K.: ‘Steels: microstructure and properties’, 3rd edn, 220–223; 2006, Cambridge, Oxford, Elsevier.
5.
Davies,R. G.: ‘The deformation behaviour of a vanadium-strengthened dual phase steel’, Metall. Trans. A, 1978, 9A, 41–52.
6.
Xia,M., Biro,E., Tian,Z. and Zhou,Y.: ‘Effects of heat input and martensite on HAZ softening in laser welding of dual phase steels’, ISIJ Int., 2008, 48, (6), 809–814.
7.
Biro,E., McDermid,J., Embury,J. and Zhou,Y.: ‘Softening kinectics in the subcritical heat-affected zone of dual-phase steel welds’, Miner., Met. Mater. Soc. A, 2010, 41A, 2348–2356.
8.
Xu,W., Westerbaan,D., Nayak,S. S., Chen,D. L., Goodwin,F., Biro,E. and Zhou,Y.: ‘Microstructure and fatige performance of single and multiple linear fiber laser welded DP980 dual-phase steel’, Mater. Sci. Eng. A, 2012, A553, 51–58.
9.
Xu,W., Westerbaan,D., Nayak,S. S., Chen,D. L., Goodwin,F. and Zhou,Y.: ‘Tensile and fatigue properties of fiber laser welded high strength low alloy’, Mater. Des., 2012, 43, 373–383.
10.
Farabi,N., Chen,D. L. and Zhou,Y.: ‘Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints’, J. Alloys Compd, 2011, 509, 982–989.
11.
Farabi,N., Chen,D. L., Li,J., Zhou,Y. and Dong,S.: ‘Microstructure and mechanical properties of laser welded DP600 steel joints’, Mater. Sci. Eng. A, 2010, A527, 1215–1222.
12.
Anand,D., Chen,D. L., Bhole,S. D., Andreychuck,P. and Boudreau,G.: ‘Fatigue behaviour of tailor (laser)-welded blanks for automotive applications’, Mater. Sci. Eng. A, 2006, A420, 199–207.
13.
Panda,S. K., Sreenivasan,N., Kuntz,M. and Zhou,Y.: ‘Numerical simulations and experimental results of tensile test behavior of laser butt welded DP980 steels’, J. Eng. Mater. Technol., 2008, 130, 041003-1-9.
14.
Sreenivisan,N., Xia,M., Lawson,S. and Zhou,Y.: ‘Effect of laser welding on formability of DP980 steel’, J. Eng. Mater. Technol., 2008, 130, 041004-1-9.
15.
Westerbaan,D., Nayak,S. S., Parkes,D., Xu,W., Chen,D. L., Bhole,S. D., Goodwin,F., Biro,E. and Zhou,N.: ‘Microstructure and mechanical properties of fiber laser welded DP980 and HSLA steels’, Proc. SMWC XV, Detriot, MI, USA, October 2012, AWS, 3/1–13.
16.
Canning,J.: ‘Fiber lasers and related technologies’, Opt. Lasers Eng., 2005, 44, 645–676.
17.
Assuncao,E., Quintino,L. and Miranda,R.: ‘Comparative study of laser welding in tailor blanks for the automotive industry’, Int. J. Adv. Manuf. Technol., 2012, 49, 123–131.
18.
Rooks,B.: ‘Tailor-welded blanks bring multiple benefits to car design’, Assem. Autom., 2001, 21, (4), 323–328.
19.
Duley,W. W.: ‘Laser welding’, 94–113; 1999, New York, John Wiley & Sons, Inc.
20.
Sharma,R. S. and Molian,P.: ‘Yb:YAG laser welding of TRIP780 steel with dual phase and mild steels for use in tailor welded blanks’, Mater. Des., 2009, 30, 4146–4155.
21.
Kawahito,Y., Mizutani,M. and Ktayama,S.: ‘Elucidation of high-power fibre laser welding phenomena of stainless steel and effect of factors on weld geometry’, J. Phys. D: Appl. Phys., 2007, 40, 5854–5859.
22.
Chan,C. and Mazumder,J.: ‘One-dimensional steady-state model for damage by vaporization and liquid expulsion due to laser-material interaction’, J. Appl. Phys., 1987, 62, (11), 4579–4586.
23.
Mazumder,J.: ‘Overview of melt dynamics in laser processing’, Opt. Eng., 1991, 30, (8), 1208–1219.
24.
Dawes,C.: ‘Laser welding’, 117–132; 1992, New York, McGraw-Hill, Inc.
25.
Ono,M., Yoshitake,A. and Omura,M.: ‘Laser wedlability of high-strength steel sheets in fabrication of tailor welded blanks’, Weld. Int., 2004, 18, (10), 777–784.
26.
General Motors Co.: ‘Weld specifications for laser welds – butt joints’, GM4485M, General Motors Co., Detriot, MI, USA, 2002.
27.
‘Standard test methods for tension testing of metallic materials’, E8/E8M-11, ASTM International, West Conshohocken, PA, USA, 2012.
28.
‘Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials’, E466-07, ASTM International, West Conshohocken, PA, USA, 2012.
29.
Lampman,S. R.: ‘Fatigue and fracture’, Vol. 19, in ‘ASM handbook’, 241–320; 1996, Materials Park, OH, ASM International.
