A range of custom alloys based on the Al–4Mg–0·4Mn system were produced with selected quaternary microalloying additions. Alloying elements studied include silicon, zinc, lead, titanium, tin, zirconium, strontium and neodymium. To characterise the corrosion response, electrochemical tests were carried out in 0·1M NaCl, supplemented by constant immersion tests and basic microstructural characterisation by means of scanning electron microscopy (SEM). Optical profilometery was used to determine the form and intensity of localised corrosion. The results indicate that low level quaternary alloying additions can have a marked influence on specific aspects of the first order correlation between chemistry, microstructure, hardness and corrosion.
DavisJr: ‘Corrosion of aluminum and aluminum alloys’; 1999Materials Park, OHASM International.
2.
PolmearIJ: ‘Light alloys: from traditional alloys to nanocrystals’4th edn2006; Burlington, MAElsevier/Butterworth-Heinemann.
3.
MullerIL and GalveleJr: Corros. Sci.197717995–1007.
4.
SearlesJLGoumaPI and BuchheitRG: Mater. Sci. Forum2002396-402, 1437-1442.
5.
BaerDrWindischCFEngelhardMHDanielsonMJJonesRH and VetranoJS: J. Vacuum Sci. Technol. A: Vacuum Surf. Films200018131–136.
6.
GoswamiRSpanosGPaoPS and HoltzRL: Mater. Sci. Eng. A2010A527, 1089-1095.
7.
GoswamiRSpanosGPaoPS and HoltzRL: Metall. Mater. Trans. A: Phys. Metall. Mater. Sci.201142348–355.
8.
DavenportAJYuanYAmbatRConnollyBJStrangwoodMAfsethA and ScamansGM: Mater. Sci. Forum2006519-521641–646.
9.
OguochaIAdigunO and YannacopoulosS: J. Mater. Sci.200843, 4208-4214.
10.
GoswamiRSpanosGPaoPS and HoltzRL: Metall. Mater. Trans. A201042A348–355.
11.
CarrollMCGoumaPIDaehnGS and MillsMJ: Mater. Sci. Eng. A2001A319–A321425–428.
12.
CarrollMCGoumaPIMillsMJDaehnGS and DunbarBR: Scr. Mater.200042335–340.
13.
BirbilisNZhangRLimMLCGuptaRKDaviesCHJLynchSPKellyRG and ScullyJr: Corrosion201369396.
14.
GuptaRKWangYZhangRSukimanNLDaviesCHJ and BirbilisN: Corrosion2012694.
15.
LodgaardL and RyumN: Mater. Sci. Eng. A2000A283144–152.
16.
VetranoJSBruemmerSMPawlowskiLM and RobertsonIM: Mater. Sci. Eng. A1997A238101–107.
17.
BhattamishraAK and LalK: Mater. Des.19971825–28.
18.
CavanaughMBirbilisNBuchheitR and BovardF: Scr. Mater.200756995–998.
19.
SinyavskiiVSVal'kovVD and TitkovaEV: Protect. Met.199834549–555.
20.
YinZPanQZhangY and JiangF: Mater. Sci. Eng. A2000A280151–155.
21.
RøysetJ and RyumN: Int. Mater. Rev.20055019–44.
22.
SukimanNLZhouXBirbilisNHughesAEMolJMCGarciaSJZhouX and ThompsonGE: ‘Durability and corrosion of aluminium and its alloys: overview, property space, techniques and developments’2012. dx.doi.org/41099
23.
RalstonKDBirbilisNWeylandM and HutchinsonCR: Acta Mater.201058, 5941-5948.
24.
GuptaRKSukimanNLCavanaughMKHintonBRWHutchinsonCR and BirbilisN: Electrochim. Acta201266245–254.
25.
RalstonKDBirbilisNCavanaughMKWeylandMMuddleBC and MarceauRKW: Electrochim. Acta201055, 7834-7842.
26.
GuptaRKDeschampsACavanaughMKLynchSP and BirbilisN: J. Electrochem. Soc.2012159C492–C502.
27.
GuptaRKSukimanNLFlemingKMGibsonMA and BirbilisN: ECS Electrochem. Lett.20121B1–B3.
28.
YasakauKAZheludkevichMLLamakaSV and FerreiraMGS: Electrochim. Acta200752, 7651-7659.
29.
UnocicKAKobePMillsMJ and DaehnGS: Mater. Sci. Forum2006519-521327–332.
30.
VetranoJSHenagerCHJRBruemmerSMGeY and HamiltonCH: ‘Use of Sc, Zr and Mn for grain size control in Al-Mg alloys’Mater. Res. Soc. Sympos. Proceed.199889–98.
31.
LiuZLiZWangM and WengY: Mater. Sci. Eng. A2008A483–A484120–122.
32.
WangXChenGLiBWuG and JiangD: Gongcheng/Rare Met. Mater. and Eng.201039719–722.
33.
FazeliFPooleWJ and SinclairCW: Acta Mater.200856, 1909-1918.
34.
BirbilisN and BuchheitRG: J. Electrochem. Soc2005152B140.
35.
‘ASM handbook’, Volume 02, ‘Properties and selection: nonferrous alloys and special-purpose materials’; 1990Materials Park, OHASM International.
36.
SongSGVetranoJS and BruemmerSM: Mater. Res. Soc.1997458237–242.
37.
KeuongYWNordlienJHOnoS and NisanciogluK: J. Electrochem. Soc.2003150B547–B551.
38.
WalmsleyJCSævikØGraverBMathiesenRHYuY and NisanciogluK: J. Electrochem. Soc.2007154C28–C35.
39.
GraverBPedersenAM and NisanciogluK: ECS Trans.20091655–69.
40.
SævikØYuYNordlienJH and NisanciogluK: J. Electrochem. Soc.2005152B334–B341.
41.
JiaZGraverBWalmsleyJCYuYSolbergJK and NisanciogluK: J. Electrochem. Soc.2008155C1–C7.
42.
GundersenJTBAytaçANordlienJH and NişancıoğluK: Corros. Sci.200446697–714.
43.
GraverBPedersenAM and NisanciogluK: ECS Trans.200916(52)55–69.
44.
AnawatiGraverBNordmarkHZhaoZFrankelGSWalmsleyJC and NisanciogluK: J. Electrochem. Soc.2010157C313–C320.
45.
FieldDJScamansGM and ButlerEP: Metall. Trans. A198718A463–472.
46.
BockrisJOMWhiteRE and ConwayBE: ‘Modern aspects of electrochemistry (No. 31)’; 1998DordrechtSpringer.
47.
LiHWangHLiangXWangY and LiuH: J. Mater. Eng. Perform.20122183–88.
48.
SongTXuXFanZZhangZWangB and LuoY: Chin. J. Rare Met.201236196–200.
49.
TimpelMWanderkaNSchlesigerRYamamotoTLazarevNIsheimDSchmitzGMatsumuraS and BanhartJ: Acta Mater.201260, 3920-3928.
50.
LiaoCChenJLiYTuR and PanC: J. Mater. Sci. Technol.201228524–530.
51.
SamuelFHSamuelAMOuelletP and DotyHW: Metall. Mater. Trans. A199829A, 2871-2884.
52.
CavanaughMK: ‘Modelling the environmental dependence of localized corrosion evolution in AA7075-T651’PhD thesis, Ohio State University2009.
53.
TanL and AllenTR: Corros. Sci.201052548–554.
54.
VetranoJSBruemmerSM and RobertsonIM: Mater. Res. Soc. Symp. Proceed.1996177–182.
55.
FangHCChenKHChenXChaoH and PengGS: Corros. Sci.200951, 2872-2877.
56.
WangYGuptaRKSukimanNLZhangRDaviesCHJ and BirbilisN: Corros. Sci.201373181.
57.
EckermannFSuterTUggowitzerPJAfsethA and SchmutzP: Electrochim. Acta200854844–855.
58.
ScullyJrKnightTOBuchheitRG and PeeblesDE: Corros. Sci.199335185–195.
59.
RaghavanV: J. Phase Equil. Diffus.200728473–476.
60.
AshtariPTezukaH and SatoT: Mater. Trans.200344, 2611-2616.
61.
EidhedW: J. Mater. Sci. Technol.20082445–47.
62.
MulazimogluMHZaluskaAParayF and GruzleskiJE: Metall. Mater. Trans. A: Phys. Metall. Mater. Sci.199728, 1289-1295.
63.
KliškićMRadoševićJGudićS and ŠmithM: Electrochim. Acta199843, 3241-3255.
