The present study compares the effect of Y2O3 addition and heating mode on the electrochemical response on austenitic (316L) and ferritic (434L) stainless steel during solid state sintering. Up to 12 vol.-%Y2O3 was added to 316L and 434L stainless steel. The compacts were sintered at 1350°C for 60 min. The sintered samples were characterised for their density and hardness. The effect of heating mode and Y2O3 addition on the microstructural evolution and electrochemical (corrosion) response for the microwave sintered samples are compared with conventionally sintered samples. The density of stainless steel samples sintered through the microwave sintering was higher than that of conventional sintering.
ShawB: ‘ASM handbook’Vol. 7978–1005; 1998Materials Park, OHASM International.
2.
GermanRM: ‘Powder metallurgy of iron and steel’437–460; 1998New YorkJohn Wiley.
3.
KlarE and SamalP: ‘Powder metallurgy stainless steel’; 2007Materials Park, OHASM International.
4.
LalS and UpadhyayaGS: ‘Sintering of stainless steel and their based composites’Rev. Powder Metall. Phys. Ceram.19863(2)165–203.
5.
ShankarJUpadhyayaABalasubramaniamR and Ramesh KumarAV: ‘Electrochemical behaviour of sintered yttria reinforced ferritic stainless steel’Powder Metall.200346(1)25–29.
6.
ShankarJUpadhyayaA and BalasubramaniamR: ‘Electrochemical behavior of sintered oxide dispersion strengthened stainless steels’Corros. Sci.200446487–498.
7.
LalS and UpadhyayaGS: ‘Effect of Y2O3 addition and sintering period on the properties of P/M 316L austenitic stainless steel’J. Mater. Sci. Lett.19876761–764.
8.
JainJKarAM and UpadhyayaA: ‘Effect of YAG addition on sintering of P/M 316L and 434L stainless steels’Mater. Lett.2004582037.
9.
BalajiS and UpadhyayaA: ‘Electrochemical behavior of sintered YAG dispersed 316L stainless steel composites’Mater. Chem. Phys.2007101(2-3)310–316.
10.
TiwariSMBalajiS and UpadhyayaA: ‘Sintering and characterization of YAG dispersed ferritic stainless steels’Mater. Sci. Eng. A2008A492(1-2)60–67.
KatzJD: ‘Microwave sintering of ceramics’Ann. Rev. Mater. Sci.199222153.
13.
AgrawalD: ‘Metal parts from microwaves’Mater. World19997(11)672–673.
14.
RoyRAgrawalDChengJ and GedevanishviliS: ‘Full sintering of powdered-metal bodies in a microwave field’Nature1999399668.
15.
AnklekarRMAgrawalDK and RoyR: ‘Microwave sintering and mechanical properties of P/M steel’Powder Metall.200144(4)355–362.
16.
AnklekarRMBauerKAgrawalDK and RoyR: ‘Improved mechanical properties and microstructural development of microwave sintered copper and nickel steel PM parts’Powder Metall.200548(1)39–46.
17.
Raja AnnamalaiAKumarRUpadhyayaA and AgrawalD: ‘Effect of heating mode on sinterability of Fe-Ni steels’J. Microw. Power Electromagn. Energy201145(4)162–177.
18.
Raja AnnamalaiAUpadhyayaA and AgrawalD: ‘Effect of heating mode on sintering of ferrous compacts through powder metallurgy route’Int. Heat Treatment Surface Eng.20115(4)155–160.
19.
SaitouK: ‘Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders’Scr. Mater.200654875.
20.
PandaSSSinghVUpadhyayaA and AgrawalD: ‘Sintering response of austenitic (316L) and ferritic (434L) stainless steel consolidated in conventional and microwave furnaces’Scr. Mater.200654, 2179-2183.
21.
PadmavathiCUpadhyayaA and AgrawalD: ‘Corrosion behaviour of microwave sintered austenitic stainless steel composites’Scr. Mater.200757651–654.
22.
PandaSSUpadhyayaA and AgrawalD: ‘Effect of heating mode and temperature on sintering of YAG dispersed 434L ferritic stainless steel’J. Mater. Sci.200742966.
23.
PandaSSUpadhyayaA and AgrawalD: ‘Effect of conventional and microwave sintering on the properties of yttria alumina garnet-dispersed austenitic stainless steel’Metall. Mater. Trans. A200637A2253.
24.
ChenLMaXCWangLM and YeXM: ‘Effect of rare earth element yttrium addition on microstructures and properties of a 21Cr–11Ni austenitic heat-resistant stainless steel’Mater. Des.201132, 2206-2212.
25.
YuPWangWWangFH and ZhuSL: ‘High-temperature corrosion behavior of sputtered K38 nanocrystalline coatings with and without yttrium addition in molten sulfate at 900°C’Surface Coat. Technol.201120668–74.
26.
NayerA (ed.): ‘The metals data book’; 1997New YorkMcGraw-Hill.
27.
SedriksAJ: ‘Effects of alloy composition and microstructure on the passivity of stainless steels, Corrosion198642(7)376–388.
28.
‘ASM hand book’Vol. 9, ‘Metallography: an introduction, metallography and microstructures’1017; 2004Materials Park, OHASM Internationa1.
29.
OteroEPardoAUtrillaMVSaenzE and AlvarezFJ: ‘Corrosion behaviour of AISI 304L and 316L stainless steels prepared by powder metallurgy in the presence of sulphuric and phosphoric acid’Corros. Sci.199840, 1421-1434.
30.
OteroEPardoAUtrillaMVSaenzE and HierroMP: ‘A study of the influence of nitric acid concentration on the corrosion resistance of sintered austenitic stainless steels’Corros. Sci.199638, 1485-1493.
31.
FedrizziLCrousierJBonoraPL and CrousierJP: ‘Corrosion mechanism of an AISI type 316L sintered stainless steels in sodium chloride solution’Werkst. Korros.199142403–409.
