Hydrogen is expected to become a commonly used energy carrier on the global scale in the near future. However, hydrogen as a fuel is environmentally friendly only when generated from water using renewable energy, such as solar energy. Therefore, intensive research aims to develop a new generation of solar materials, which may be used for the production of hydrogen fuel from water using solar energy. The highly promising candidates for solar energy conversion are photosensitive oxide semiconductors (POSs), particularly the TiO2-based semiconductors, which may be used for converting solar energy into the chemical energy required for hydrogen generation from water, as well as water purification (removal of microbial agents and toxic contaminants from water). The present work considers an R&D strategy for developing TiO2-based systems capable of converting solar energy into the chemical energy via water oxidation. The effect of surface versus bulk semiconducting properties on the performance of POSs is considered in terms of partial and total water oxidation. The progress requires modification of the key performance-related properties (KPPs) in order to enhance the light-induced reactivity of the POSs with water. The most recent approach in the development of POSs with enhanced performance is deposition of metallic islets of different size and shape in order to induce a plasmonic effect. The development of high-performance POSs can be achieved through a multidisciplinary approach. It is shown that defect disorder has a critical effect on the light-induced reactivity of POSs and the solar energy conversion. Therefore, defect engineering may be applied in the development of high-performance POSs. This work considers the hurdles in the development of high-performance POSs for specific applications and formulates the key questions that must be addressed to overcome these hurdles. The concepts developed for TiO2 may be expanded for other metal oxides.
Get full access to this article
View all access options for this article.
References
1.
NeftelAMooreEOeschgerH and StaufferB: Nature, 1985, 315, 45–47.
2.
FriedliHLötscherH and SiegenthalerH: Nature, 1996, 324, 237–238.
3.
KeelingCDBacastowRBCarterACPiperSCWhorfTPHeimannMMookWG and RoeloffzenRB: Geogr. Monogr., 1989, 55, 165–235.
4.
ThomasCEJamesBD and LomaxFDJr: Int. J. Hydrogen Energy, 1998, 23, 949–966.
5.
VezirogluTN: Int. J. Hydrogen Energy, 2000, 25, 1143–1150.
6.
ArnasonB and SigfussonTI: Int. J. Hydrogen Energy, 2000, 25, 389–394.
7.
BakTNowotnyJSucherNJ and WachsmanE: J. Phys. Chem. C, 2011, 115, 15711–15738.
8.
NowotnyJ: Energy Environ. Sci., 2008, 1, 565–572.
9.
NowotnyJ: ‘Oxide semiconductors for solar energy conversion’; 2012, Boca Raton, CRC.
10.
BakT: ‘Oxide semiconductors’, Res. Rep, 2010.
11.
AbdiF. FHanLSmetsA. HZemaMDamBandvan de KrolR: ‘Efficient solar water splitting by enhanced charge separation in a bismuth vanadate-silicon tandem photoelectrode’, Nat Commun, 2013, 4, 2195.
12.
KashelevO and TurnerJA: Science, 1998, 280, 425–427.
13.
FujishimaA and HondaK: Nature, 1972, 238, 37–38.
14.
LichtSWangBMukerjiSUmenoM and TributschH: J. Phys. Chem., 2000, 104, 8920.
15.
ServiceRF: Science, 2002, 297, 2189–2190.
16.
NowotnyJBakT and NowotnyMK: ‘Surface active sites for water splitting’, J. Chem. Phys. B, 2006, 110, 18492–18495.
17.
NowotnyJ and VezirogluTN: Int. J. Hydrogen Energy, 2011, 36, 13218–13224.
18.
SucherNJCarlesMCNowotnyJ and BakT: Adv. Appl. Ceram., 2012, 111, 16.
19.
FujishimaAHashimotoK and WatanabeT: ‘TiO2 photocatalysis’; 1999, Tokyo, BKC.
20.
KofstadP: ‘Electrical conductivity, diffusion and nonstoichiometry in binary metal oxides’; 1972, New York, Wiley.
21.
HenrichVE and CoxPA: ‘The surface science of metal oxides’; 1994, Cambridge, Cambridge University Press.
22.
KrögerFA: ‘The chemistry of imperfect crystals’; 1974, Amsterdam, North Holland.
23.
NorbyT: ‘Proton conduction in solids’, MRS Bull., 2009, 34, 923–928.
24.
IkumaYOgoeSWatanabeYNiwaKTajiriH and SakataO: J. Ceram. Soc. Jpn., 2013, 121, 254–257.
25.
BakTNowotnyJ and NowotnyMK: ‘Defect disorder of TiO2’, J. Phys. Chem. B, 2006, 110, 21560–21567.
26.
NowotnyJBakT and SheppardL: J. Am. Chem. Soc., 2008, 130, 9984–9993.
27.
IsmailABen BrachimAPalauJM and LassabatereLA: Surf. Sci., 1985, 164, 43–54.
28.
HenrichVEDresselhausG and ZeigerHJ: J. Vac. Sci. Technol., 1978, 15, 534–537.
29.
BourasseauSMartinJRJullietF and TaichnerSJ: J. Chim. Phys., 1974, 71, 1017–1024.
30.
MenetreyMMarkivitsA and MinotC: Surf. Sci., 2003, 524, 49–62.
31.
NowotnyJ: ‘Science of ceramic interfaces’, 79–204; 1991, Amsterdam, Elsevier.
32.
AtanacioABakT and NowotnyJ: ACS Appl. Mater. Interfaces, 2012, 4, 6626–6634.
33.
NowotnyJ and RekasM: Solid State Ionics, 1984, 12, 253.
34.
NowotnyJSikoraI and WagnerJBJr: J. Am. Ceram. Soc., 1982, 65, 192.
35.
HaberJNowotnyJ and StochJ: Appl. Surf. Sci., 1984, 17, 324.
36.
BakTChuDFrancisALiW and NowotnyJ: Catalysis Today, 2014, 224, 200–208.
37.
TaoJLuttrellT and BasillM: Nat. Chem., 2011, 3, 296.
38.
DoYRLeeWDwightK and WoldA: J. Solid State Chem., 1994, 108, 198.
39.
MartinCSolanaGRivesVMerciGPalmisanoL and SclafaniA: Catal. Lett., 1997, 49, 235.
40.
AnpoM and TakeuchiM: J. Catal., 2003, 216, 505.
41.
JinS and ShirasakiF: Chem. Eng., 2004, 97, 203.
42.
NowotnyJBakT and SorrellCC: Adv. Appl. Ceram., 2005, 104, 214.
43.
AwazuKet al.: J Am Chem Soc, 2008, 130, 1676.
44.
KerkerM: J. Colloid Interface Sci., 1985, 105, 297–314.
45.
ChenY and MingH: Photonic Sens., 2012, 2, (1), 37–49.
46.
El-BrolossyTAAbdallahTMohamedMBAbdallahSEasawiKNegmS and TalaatH: Eur. Phys. J. Spec. Top., 2008, 153, 361–364.
47.
MockJJBarbicMSmithDRSchultzDA and SchultzS: J. Chem. Phys., 2002, 116, 6755.
48.
KumariPRickardH and MajewskiP: J. Nanosci. Nanotechnol., 2012, 12, 8001–8007.
49.
MorisakiHWatanabeTIwaseM and YazawaK: Appl. Phys. Lett, 1976, 29, 338.
50.
PeharzGDimrothF and WittstadtU: Int. J. Hydrogen Energy, 2007, 32, 3248–3252.
51.
YoneyamaHSakamotoH and TamuraH: Electrochem. Acta, 1975, 20, 341.
52.
NozikA: J. Appl. Phys., 1976, 29, 150.
53.
AbdiFFFiretN and van de KrolR: ‘Efficient BiVO4 thin film photoanodes modified with cobalt phosphate catalyst and W-doping’, ChemCatChem, 2013, 5, 490–496.
54.
ParacchinoALaporteVSivulaKGrätzelM and ThimsenE: ‘Highly active oxide photocathode for photoelectrochemical water reduction’, Nat. Mater., 2011, 10, 456–461.
55.
KaiserBJaegermannWFiechterS and LewerenzHJ: ‘Hydrogen production by direct photoelectrochemical conversion of sun light’, Bunsen-Magazin, 2011, 13, 104–111.
56.
MillerELMarsenBPaluselliD and RocheleauR: ‘Optimization of hybrid photoelectrodes for solar water-splitting’, Electrochem. Solid-State Lett., 2005, 8, (2013), A247–A249.
57.
BeckerJH and FrederikseHPR: J. Appl. Phys., 1962, 33, 447–455.
58.
Herrmann-GeppertIBogdanoffPRadnikJFenglerSDittrichT and FiechterS: ‘Surface aspects of sol–gel derived hematite films for the photoelectrochemical oxidation of water’, Phys. Chem. Chem. Phys., 2013, 15, 1389–1398.
59.
KronikL and ShapiraY: Surf Sci Rep., 1999, 37, 1–206.
60.
HossainFMEvteevAVBelovaIVNowotnyJ and MurchGE: Adv Appl Ceram., 2012, 111, 72–93.
61.
WangMLiuY and YangH: ‘A unified theory for the formation of anodized metal oxide structures’, Electrochim. Acta, 2012, 62, 424–432.
62.
LiSZhangGGuoDYuL and ZhangW: ‘Anodization fabrication of highly ordered TiO2 nanotubes’, J. Phys. Chem. C, 2009, 113, 12759–12765.
63.
GalstyanVVomieroACominiEFagliaG and SberveglieriG: ‘TiO2 nanotubular and nanoporous arrays by electrochemical anodization on different substrates’, RSC Adv., 2011, 1, 1038–1044.
64.
ZhangGHuangHZhangYChanH and ZhouL: ‘Highly ordered nanoporous TiO2 and its photocatalytic properties’, Electrochem. Commun., 2007, 9, 2854–2858.
65.
GopalP: Sol. Energy Mater. Sol. Cells, 2006, 90, 2011–2075.
66.
RoyPBergerS and SchmukiP: ‘TiO2 nanotubes: synthesis and applications’, Angew. Chem. Int. Ed., 2011, 50, 2904–2939.
67.
PauloseMPrakasamHVargheseOPengLPopatKMorGDesaiT and GrimesC: ‘TiO2 nanotube arrays of 1000 μm length by anodization of titanium foil: phenol red diffusion’, J. Phys. Chem. C, 2007, 111, 14992–14997.
68.
HaringAMorrisA and HuM: ‘Controlling morphological parameters of anodized titania nanotubes for optimized solar energy applications’, Materials, 2012, 5, 1890–1909.
69.
GopalKOommanMVargheseKPauloseMShankarK and GrimesCA: Sol. Energy Mater. Sol. Cells, 2006, 90, 2011–2075.
70.
AbidinZMatsueN and HenmiT: J. Comput.-Aided Mater. Des., 2007, 14, 5.
IkedaJASChiangY.-MGarratt-ReedAJ and Vander SandeJB: J. Am. Ceram. Soc., 1993, 76, 2447.
73.
PrasadM and SianoT: J. Comput-Aided Mater. Res., 2005, 12, 17.
74.
LiuC.-L and PlimptonSJ: Phys. Rev. B, 1995, 51, 4523.
75.
MurchGE and OatesWA: Philos. Mag. Lett., 1987, 56, 187.
76.
DieboldU: Surf. Sci. Rep., 2003, 48, 53–229.
77.
ArmstrongENDuncanKL and WachsmanED: ‘Effect of A and B-site cations on surface exchange coefficient for ABO3 perovskite materials’, Phys. Chem. Chem. Phys., 2013, 15, 2298–2308.
78.
KanCC and WachsmanED: ‘Identifying drivers of catalytic activity through systematic surface modification of cathode materials’, J. Electrochem. Soc., 2009, 156, B695–B702.
79.
ArmstrongENDuncanKL and WachsmanED: ‘Surface exchange coefficients of composite cathode materials using in situ isothermal isotope exchange’, J. Electrochem. Soc., 2011, 158, B283–B289.
80.
DearnaleyGFreemanJHNelsonRS and StephenJ: ‘Ion implantation’; 1973, New York, American Elsevier Publishing Co.
81.
AzimiSSongJDangZYLiangHD and BreeseMBH: J. Micromech. Microeng., 2012, 22, 113001.
