Aluminium powder particles produced by SAMD technique: Typical characteristics and correlations between processing conditions and powder size

The present paper consists of two parts. In the first part the principles of a new method of metal powder production, termed ‘solid assisted melt disintegration (SAMD)’ are discussed and the typical characteristics of the produced powder are outlined. In the second part the effects of some processing parameters on the size distribution and mean diameter of the powder are reported. The SAMD method involves mixing solid particles (i.e. alumina) with the liquid aluminium alloy aided by mechanical agitation. The shear force induced by the impeller is transferred to the metal via the non-wetting solid medium and results in melt disintegration. The resulting mixture of aluminium droplets and alumina particles are subsequently cooled in air and screened through 300 μm sieve to separate alumina from solidified aluminium powder particles. The SAMD technique has demonstrated the capability to produce a wide particle size distribution. The small sized particles (i.e. <53 μm) exhibited irregular shapes, but larger ones were mostly spherical. These powder particles were dense (pore free) without attached satellite particles and exhibited a relatively coarse microstructure. The processing parameters investigated include the size of Al₂O₃ particles, Al₂O₃/Al weight ratio, stirring speed and stirring time. It was concluded that there exists an optimum value for each of the aforementioned parameters corresponding to a minimum in the mean particle size.