Coupled heat and fluid flow model and experimental verification of aluminium plate die casting

Abstract

The present work aims to forecast mould filling, void shape, location and size as well as columnar to equiaxed transition (CET) in commercial pure aluminium casting. A model coupling the momentum equations of the fluid flow and heat transfer equations is presented, in which metallostatic pressure, air gap and oxide layer are considered. Different casting parameters were investigated such as casting configuration by varying the plate thickness from 5 to 20 mm, melt superheat from 40 to 120°C, mould preheat up to 200°C and different pouring heads ranging from 0·3 to 0·6 m. Regarding the microstructure and void formation, the approach based on the Niyama criterion, was considered. The experimental verification of the model was achieved by gravity die casting in the form of a rectangular cavity. Voids inside aluminium plate were investigated by X-ray imaging. Microstructure and CET was investigated microscopically. The supposed model proves its validity for mould filling and in detecting the void features and CET.

Keywords

SOLIDIFICATION ALUMINIUM CASTING COUPLED HEAT AND MOULD FILLING AIR GAP FORMATION CET CRITERIA CASTING VOIDS

Get full access to this article

View all access options for this article.

References

Bonollo

, Urban

, Bonatto

and Botter

: Metall Ital., 2005, 6, 23–32.

Stefanescu

D. M.

: Proc. Conf. on ‘Numerical simulation of casting solidification in automotive applications’, 69-97; 1991, Warrendale, PA, TMS.

Pequet

and Rappaz

: in ‘Modelling of casting, welding and advanced solidification processes IX’, 71-81; 2000, Aachen, Shaker Verlag.

Huang

, Mori

and Conley

: Metall. Mater. Trans. B, 1998, 29B, 1249–1260.

Attar

, Homayonifar

, Babaei

, Asgari

and Davami

: Model. Simul Mater. Sci. Eng., 2005, 13, 903–917.

Dai

N. M.

and Goldak

J. A.

: in ‘Modelling of casting, welding and advanced solidification processes VII’, 57-65; 1995, Warrendale PA, TMS.

Barkhudarov

M. R.

: Proc. Conf. on ‘Solidification process’, (ed. Beech

and Jones

), 181-184; 1997, Sheffield, Department of Engineering Materials.

El-Sabbagh

: ‘Solidification simulation and structure evolution in aluminium castings’, PhD thesis, Ain Shams University, Cairo, Egypt, 2004.

vander Graff

G. B.

, vanDen Akker

H. E. A.

and Katgerman

: Metall Mater. Trans. B, 2001, 32B, 69–78.

10.

Poirier

and Poirier

E. J.

: ‘Heat transfer fundamentals for metal casting’, 2nd edn; 1994, Warrendale, PA, TMS.

11.

Hassan

: ‘Modelling of solidification structures in cast alloys’, PhD thesis, Ain Shams University, Cairo, Egypt, 1999.

12.

Zhang

, Cockcroft

S. L.

, Maijer

D. M.

, Zhu

J. D.

and Phillion

A. B.

: JOM, 2005, 57, 36–43.

13.

Berry

J. T.

and Pehlke

R. D.

: in ‘Metals handbook’, 9th edn,Vol. 15, ‘Modelling of solidification heat transfer’, 858-866; 1988, Materials Park, OH, ASM International.

14.

Fryer

Y. D.

, Bailey

, Cross

and Chow

: in ‘Modelling of casting, welding and advanced solidification processes VI’, 143-151; 1993, Warrendale, PA, TMS.

15.

Niyama

, Uchida

, Morikawa

and Saito

: Proc. 49th Int. Foundry Cong., Chicago, IL, USA, April 1982, AFS, Paper 10.

16.

Rigaut

, Laurent

, Kreziak

and Laty

: in ‘Modelling of casting, welding and advanced solidification processes VI’, 277-284; 1993, Warrendale, PA, TMS.

17.

McClain

, Berry

and Dawsey

: AFS Trans., 2003, 111, 147–158.

18.

Carlson

K. D.

, Ou

, Hardin

R. A.

and Beckermann

: Metall Mater. Trans. B, 2002, 33B, 731–740.