A study of recrystallisation textures in hot band of a continuous cast Al–Mn–Mg alloy

The hot band of a commercial continuous cast (CC) Al–Mg–Mn alloy was annealed at different temperatures ranging from room temperature to 510°C for 3 h. The evolution of microstructure and crystallographic texture was investigated during the annealing treatment. It was found that the recrystallised alloy exhibited a severely elongated grain structure and a texture that consisted of a new type of component ({113}〈110〉) and two fibre components (〈100〉//ND and 〈110〉//ND), the axes of which were along the normal direction of the rolling plane (ND) in 〈100〉 and 〈110〉 respectively. The 〈100〉//ND fibre was dominated by a ND rotated cube orientation {001}〈310〉, while the 〈110〉//ND fibre was mainly composed of Goss and P orientation ({011}〈566〉). The formation of the {113}〈110〉 texture and two fibre textures was likely to be attributed to the concurrent precipitation effect taking place upon heating in annealing treatment of the alloy.