WestmacottKH, SmallmanRE, DobsonPS: ‘The annealing of voids in quenched aluminium and a determination of the surface energy’,Met. Sci. J., 1968, 2, 177–181.
3.
PeckRL, WestmacottKH: ‘Further studies of dislocation-loop annealing in aluminium-base alloys’,Met. Sci., 1975, 9, 283–288.
4.
Roques-CarmesC, AucouturierM, LacombeP: ‘The influence of testing temperature and thermal history on the intergranular embrittlement and penetration of aluminium by liquid gallium’,Met. Sci. J., 1973, 7, 128–132.
5.
BukalilRH, Roques-CarmesC, TixierR, AucouturierM, LacombeP: ‘Fractographic investigation of grain-boundary precipitates in Al–Cu Alloys (1 and 4 wt.- Cu) by gallium embrittlement’,Met. Sci., 1974, 8, 387–393.
SaundersN, RivlinVG: ‘Thermodynamic characterization of Al–Cr, Al–Zr, and Al–Cr–Zr alloy systems’,Mater. Sci. Technol., 1986, 2, 521–527.
8.
ZhangXD, LorettoMH: ‘Stability and decomposition mechanisms of supersaturated solid solutions in rapidly solidified aluminium-transition metal alloys’,Mater. Sci. Technol., 1996, 12, 19–24.
9.
MarshallGJ, HughesIR, MillerWS: ‘Effect of consolidation route on structure and property control in rapidly solidified Al–Cr–Zr–Mn powder alloy for high temperature service’,Mater. Sci. Technol., 1986, 2, 394–399.
10.
AdkinsNJ, TsakiropoulosP: ‘Design of powder metallurgy aluminium alloys for applications at elevated temperatures: Part 2, Tensile properties of extruded and Conformed gas atomised powders’,Mater. Sci. Technol., 1991, 7, 419–426.
11.
MachlerR, UggowitzerPJ, SolenthalerC, PedrazzoliRM, O SpiedelM: ‘Structure, mechanical properties, and stress corrosion behaviour of high strength spray deposited 7000 series aluminium alloy’,Mater. Sci. Technol., 1991, 7, 447–451.
12.
MatsukiK, XiangS, KimotoT, TokizawaM, YokoteT, KusuiJ, FujiiK: ‘Effect of solidification microstructure on strength and ductility of powder metallurgical 2024–3Fe–5Ni aluminium alloy’,Mater. Sci. Technol., 1997, 13, 477–483.
13.
GholiniaA, PrangnellPB: ‘Cast microstructure and dispersoid formation in spray deposited Al–Li alloys’,Mater. Sci. Technol., 1999, 15, 328–336.
14.
EschenbachL, SolenthalerC, UggowitzerPJ, O SpeidelM: ‘Strength and fracture toughness of spray formed Al–Cu–Mg–Ag alloys’,Mater. Sci. Technol., 1999, 15, 926–932.
15.
KrajnikovAV, ShmakovYuV, ThompsonGE: ‘High strength weldable Al–Zn–Mg base alloys produced by water atomisation’,Mater. Sci. Technol., 2003, 19, 1207–1214.
16.
BallA, HutchinsonMM: ‘Superplasticity in the aluminium–zinc eutectoid’,Met. Sci. J., 1969, 3, 1–7.
17.
ToddRI: ‘Critical review of mechanism of superplastic deformation in fine grained metallic materials’,Mater. Sci. Technol., 2000, 16, 1287–1294.
18.
MatsukiK, UetaniY, YamadaM, MurakamiY: ‘Superplasticity in an Al–6 wt-Mg alloy’,Met. Sci., 1976, 10, 235–242.
19.
MatsukiK, MoritaH, YamadaM, MurakamiY: ‘Relative motion of grains during superplastic flow in an Al–9Zn–1 wt.Mg alloy’,Met. Sci., 1977, 11, 156–163.
RidleyN, CullenE, HumphreysFJ: ‘Effect of thermomechanical processing on evolution of superplastic microstructures in Al–Cu–Zr alloys’, Mater. Sci. Technol., 2000, 16,117–124.
23.
IwasakiH, MoriT, MabuchiM, HigashiK: ‘Microstructural evolution and plastic stability during superplastic flow in a 7475 aluminium alloy’,Mater. Sci. Technol., 1999, 15, 180–184.
24.
LiF: ‘Microstructural evolution and mechanisms of superplasticity in an Al–4·5Mg alloy’,Mater. Sci. Technol., 1997, 13, 17–23.
25.
WuH.-Y, LeeS, WangJ.-Y: ‘Effect of inverted pressurisation profile on deformation characteristics of 5083 aluminium alloy during superplastic forming’,Mater. Sci. Technol., 2002, 18, 438–444.
26.
GrimesR, DashwoodRJ, HarrisonAW, FlowerHM: ‘Development of a high strain rate superplastic Al–Mg–Zr alloy’,Mater. Sci. Technol., 2000, 16, 1334–1339.
27.
GrimesR: ‘Superplastic forming: evolution from metallurgical curiosity to major manufacturing tool?’,Mater. Sci. Technol., 2003, 19, 3–10.
28.
StowellMJ: ‘Cavity growth in superplastic alloys’,Met. Sci., 1980, 14, 267–272.
29.
StowellMJ: ‘Failure of superplastic alloys’,Met. Sci., 1983, 17, 1–11.
30.
MartinCF, JosserondC, BlandinJJ, SalvoL, CloetensP, BollerE: ‘X-ray microtomography study of cavity coalescence during superplastic deformation of an Al–Mg alloy’,Mater. Sci. Technol., 2000, 16, 1299–1301.
31.
ClyneTW, RobertMH: ‘Stability of intermetallic aluminides in liquid aluminium and implications for grain refinement’,Metals Tech., 1980, 7, 177–185.
QuestedTE: ‘Understanding mechanisms of grain refinement of aluminium alloys by inoculation’,Mater. Sci. Technol., 2004, 20, 1357–1369.
34.
KearnsMA, CooperPS: ‘Effects of solutes on grain refinement of selected wrought aluminium alloys’,Mater. Sci. Technol., 1997, 13, 650–654.
35.
KarantzalisAE, KennedyAR: ‘Nucleation behaviour of TiB2 particles in pure Al and effect of elemental additions’,Mater. Sci. Technol., 1998, 14, 1092–1096.
36.
SchumacherP, GreerAL, WorthJ, EvansPV, KearnsMA, FisherP, GreenAH: ‘New studies of nucleation mechanisms in aluminium alloys: implications for grain refinement practice’,Mater. Sci. Technol., 1998, 14, 394–404.
37.
BowenJR, PrangnellPB, HumphreysFJ: ‘Microstructural evolution during formation of ultrafine grain structures by severe deformation’,Mater. Sci. Technol., 2000, 16, 1246–1250.
38.
HayesJS, KeyteR, PrangnellPB: ‘Effect of grain size on tensile behaviour of a submicron grained Al–3 wt-Mg alloy produced by severe deformation’,Mater. Sci. Technol., 2000, 16, 1259–1263.
39.
GholiniaA, HumphreysFJ, PrangnellPB: ‘Processing to ultrafine grain structures by conventional routes’,Mater. Sci. Technol., 2000, 16, 1251–1255.
40.
HumphreysFJ: ‘Recrystallization mechanisms in two-phase alloys’,Met. Sci., 1979, 13, 136–145.
StonehamAM, HardingJH: ‘Mesoscopic modelling: materials at the appropriate scale’,Mater. Sci. Technol., 2009, 25, 460–465.
54.
Castro-FernandezFR, SellarsCM, WhitemanJA: ‘Changes of flow stress and microstructure during hot deformation of Al–1Mg–1Mn’,Mater. Sci. Technol., 1990, 6, 453–460.
55.
SellarsCM: ‘Modelling microstructural development during hot rolling’,Mater. Sci. Technol., 1990, 6, 1072–1081.
56.
ShiH, McLarenAJ, SellarsCM, ShahaniR, BolingbrokeR: ‘Constitutive equations for high temperature flow stress of aluminium alloys’,Mater. Sci. Technol., 1997, 13, 210–216.
57.
MizraMS, SellarsCM, KarhausenK, EvansP: ‘Multipass rolling of aluminium alloys: finite element simulations and microstructural evolution’,Mater. Sci. Technol., 2001, 17, 874–879.
58.
TimothySP, YiuHL, FineJM, RicksRA: ‘Simulation of single pass of hot rolling deformation of aluminium alloy by plane strain compression’,Mater. Sci. Technol., 1991, 7, 255–261.
59.
ChenBK, ThomsonPF, ChoiSK: ‘Computer modelling of microstructure during hot flat rolling of aluminium’,Mater. Sci. Technol., 1992, 8, 72–77.
60.
WellsMA, MaijerDM, JuppS, LockhartG, van der WindenMR: ‘Mathematical model of deformation and microstructural evolution during hot rolling of aluminium alloy 5083’,Mater. Sci. Technol., 2003, 19, 467–476.
61.
SerajzadehS: ‘Modelling flow stress behaviour of aluminium alloys during hot rolling’,Mater. Sci. Technol., 2006, 22, 713–718.
62.
AhmedH, WellsMA, MaijerDM, van der WindenMR: ‘Application of a mathematical model to multipass hot deformation of aluminium alloy AA 5083’,Mater. Sci. Technol., 2008, 24, 787–797.
GoJ, PooleWJ, MilitzerM, WellsMA: ‘Modelling recovery and recrystallisation during annealing of AA 5754 aluminium alloy’,Mater. Sci. Technol., 2003, 19, 1361–1368.
65.
MarthinsenK, NesE: ‘Modelling strain hardening and steady state deformation of Al–Mg alloys’,Mater. Sci. Technol., 2001, 17, 376–388.
66.
PooleWJ, ShercliffHR, CastilloT: ‘Process model for two step age hardening of 7475 aluminium alloy’,Mater. Sci. Technol., 1997, 13, 897–904.
67.
RobsonJD: ‘Modelling the evolution of particle size distribution during nucleation, growth and coarsening’,Mater. Sci. Technol., 2004, 20, 441–448.
68.
KhanIN, StarinkMJ: ‘Microstructure and strength modelling of Al–Cu–Mg alloys during non-isothermal treatments. Part 1 – Controlled heating and cooling’,Mater. Sci. Technol., 2008, 12, 1403–1410.
69.
KhanIN, StarinkMJ, SinclairI, WangSC: ‘Microstructure and strength modelling of Al–Cu–Mg alloys during non-isothermal treatments. Part 2 – Welds’,Mater. Sci. Technol., 2008, 12, 1411–1418.
70.
HersentE, DriverJH, PiotD, DesrayaudC: ‘Integrated modelling of precipitation during friction stir welding of 2024–T3 aluminium alloy’,Mater. Sci. Technol., 2010, 26, 1345–1352.
71.
ChenJY, FanZ: ‘Modelling of rheological behaviour of semisolid metal slurries’,Mater. Sci. Technol., 2002, 18, 237–267.
72.
SolekK, StuczynskiT, BialobrzeskiA, KuziakR, MituraZ: ‘Modelling thixocasting with precise accounting of moving front of material’,Mater. Sci. Technol., 2005, 21, 551–558.
GregsonPJ, FlowerHM, TiteCNJ, MukhopdhyayAK: ‘Role of vacancies in coprecipitation of δ′- and S-phases in Al–Li–Cu–Mg alloys’,Mater. Sci. Technol., 1986, 2, 349–353.
77.
HuangZW, SmallmanRE, LorettoMH, WhiteJ: ‘Influence of lithium additions on precipitation and hardening of 6061’,Mater. Sci. Technol., 1991, 7, 205–212.
78.
HuangZW, LorettoMH, SmallmanRE, WhiteJ: ‘Mechanism of nucleation and precipitation in 6061–Li alloys’,Mater. Sci. Technol., 1994, 10, 869–878.
79.
HuangZW, LorettoMH, WhiteJ: ‘Influence of lithium additions on precipitation and age hardening of 7075 alloy’,Mater. Sci. Technol., 1993, 9, 967–980.
80.
FlowerHM, GregsonPJ: ‘Solid state phase transformations in aluminium alloys containing lithium’,Mater. Sci. Technol., 1987, 3, 81–90.
81.
GregsonPJ, NewmanJ, GrayA: ‘Effect of surface treatment on fatigue properties of Al–Li–Cu–Mg–Zr and Al–Zn–Mg–Cu–Zr plate’,Mater. Sci. Technol., 1989, 5, 65–70.
ShercliffHR, AshbyMF: ‘Design with metal matrix composites’,Mater. Sci. Technol., 1994, 10, 443–451.
85.
ShakesheffAJ, PurdueG: ‘Designing metal matrix composites to meet their target: particulate reinforced aluminium alloys for missile applications’,Mater. Sci. Technol., 1998, 14, 851–856.
86.
WarnerAEM, BellJAE, StephensonTF: ‘Opportunities for new graphitic aluminium metal matrix composite’,Mater. Sci. Technol., 1998, 14, 843–850.
87.
ZeunerT, StoyanovP, SahmPR, RuppertH, EngelsA: ‘Developing trends in disc brake technology for rail application’,Mater. Sci. Technol., 1998, 14, 857–863.
88.
MurphyAM, HowardSJ, ClyneTW: ‘Characterisation of severity of particle clustering and its effect on fracture of particulate MMCs’,Mater. Sci. Technol., 1998, 14, 959–968.
89.
KarnezisPA, DurrantG, CantorB, PalmiereEJ: ‘Mechanical properties and microstructure of twin roll cast Al–7Si/SiCp MMCs’,Mater. Sci. Technol., 1995, 11, 741–751.
90.
PengHX, FanZ, EvansJRG: ‘Novel MMC microstructures prepared by melt infiltration of reticulated ceramic preforms’,Mater. Sci. Technol., 2000, 16, 903–907.
91.
ZhouZ, PengHX, FanZ, LiDX: ‘MMCs with controlled non-uniform distribution of submicrometre Al2O3 particles in 6061 aluminium alloy matrix’,Mater. Sci. Technol., 2000, 16, 908–912.
