In this present work, the softening behaviour of Cu–1·1 wt-Al2O3 alloy containing nanometric alumina particles was investigated. Single pass equal channel angular pressing was first applied on cylindrical specimens, and then, the deformed samples were subjected to annealing treatments in the temperature range of 700–1000°C. Afterwards, finite element analysis, microstructural observations, Vickers hardness and shear punch testing were employed to study strain distribution as well as the recrystallisation behaviour of the examined alloy. It was found that the alloy is softened at 800°C or above, which shows its high thermal stability. Furthermore, a very fine completely recrystallised microstructure was obtained via a continuous mechanism of recrystallisation at 1000°C. The activation energy of recrystallisation was measured to be ∼181 kJ mol−1, which offers a high thermal stability in high temperature applications of this alloy.
TianB., LiuP., SongK., LiY., LiuY., RenF. and SuJ.: ‘Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite’, Mater. Sci. Eng. A, 2006, A435–A436, 705–710.
2.
SongK., LiuP., TianB., DongQ. and XingJ.: ‘Stabilization of nano-Al2O3p/Cu composite after high temperature annealing treatment’, Mater. Sci. Forum, 2005, 475–479, 993–996.
3.
KimS. H. and LeeD. N.: ‘Annealing behavior of alumina dispersion-strengthened copper strips rolled under different conditions’, Metall. Mater. Trans. A, 2002, 33A, 1605–1616.
4.
LeeJ., KimY. C., LeeS., AhnS. and KimN. J.: ‘Correlation of the microstructure and mechanical properties of oxide-dispersion-strengthened coppers fabricated by internal oxidation’, Metall. Mater. Trans. A, 2004, 35A, 493–502.
5.
GuoM., WangM., LeiR., TanW. and JinP.: ‘Comparison study on the annealing behaviors of dispersion strengthened copper alloys with different nanoparticles’, Rare Met., 2007, 26, 456–462.
6.
AfsharA. and SimchiA.: ‘Abnormal grain growth in alumina dispersion-strengthened copper produced by an internal oxidation process’, Scr. Mater., 2008, 58, 966–969.
7.
RajkovicV., BozicD., DevecerskiA., BojanicS. and JovanovicM. T.: ‘Strength and thermal stability of Cu–Al2O3 composite obtained by internal oxidation’, Rev. Metal., 2010, 46, 520–529.
8.
ShenK., GuoM. and WangM.: ‘Recrystallization characteristics of a fine grained copper alloy’, Mater. Chem. Phys., 2010, 120, 709–714.
9.
LugoN., LlorcaN., SunolJ. J. and CabreraJ. M.: ‘Thermal stability of ultrafine grains size of pure copper obtained by equal-channel angular pressing’, J. Mater. Sci., 2010, 45, 2264–2273.
10.
MolodovaX., GottsteinG., WinningM. and HellmigR. J.: ‘Thermal stability of ECAP processed pure copper’, Mater. Sci. Eng. A, 2007, A460–A461, 204–213.
11.
LebedevA. B., PulnevS. A., KopylovV. I., BurenkovY. u. A., VetrovV. V. and VylegzhaninO. V.: ‘Thermal stability of sub-microcrystalline copper and Cu: ZrO2 composite’, Scr. Mater., 1996, 35, 1077–1081.
12.
MonshatH., SerajzadehS., AkhgarJ. M. and KamankeshA.: ‘Effect of strain path change on mechanical properties and final microstructure of Cu–Al2O3 in equal channel angular pressing’, Mater. Sci. Technol., 2012, 29, 210–218.
13.
FathyA., ShehataF., AbdelhameedM. and ElmahdyM.: ‘Compressive and wear resistance of nanometric alumina reinforced copper matrix composites’, Mater. Des., 2012, 36, 100–107.
14.
BasavarajV. P., ChakkingalU. and KumarT. S. P.: ‘Study of channel angle influence on material flow and strain inhomogeneity in equal channel angular pressing using 3D finite element simulation’, J. Mater. Process. Technol., 2009, 209, 89–95.
15.
ValievR. Z. and LangdonT. G.: ‘Principles of equal-channel angular pressing as a processing tool for grain refinement’, Prog. Mater. Sci., 2006, 51, 881–981.
16.
HansenN. and RalphB.: ‘Additive strengthening mechanisms in dispersion hardened polycrystals’, Acta Metall., 1986, 34, 1955–1962.
17.
RajkovicV., BozicD. and JovanovicM. T.: ‘Effects of copper and Al2O3 particles on characteristics of Cu–Al2O3 composites’, Mater. Des., 2010, 31, 1962–1970.
18.
HumphreysF. J. and MartinJ. W.: ‘The effect of dispersed silica particles on the recovery and recrystallization of deformed copper crystals’, Acta Metall., 1966, 14, 775–781.
19.
JazaeriH. and HumphreysF. J.: ‘The transition from discontinuous to continuous recrystallization in some aluminium alloys II – annealing behavior’, Acta Mater., 2004, 52, 3251–3262.
20.
KaluP. N. and WaryobaD. R.: ‘A JMAK-microhardness model for quantifying the kinetics of restoration mechanisms in inhomogeneous microstructure’, Mater. Sci. Eng. A, 2007, A464, 68–75.
21.
HumphreysF. J. and HatherlyM.: ‘Recrystallization and related annealing phenomena’; 2004, Oxford, Elsevier.
22.
CaoW. Q., GuC. F., PerelomaE. V. and DaviesC. H. J.: ‘Stored energy, vacancies and thermal stability of ultra-fine grained copper’, Mater. Sci. Eng. A, 2008, A492, 74–79.
23.
TakayamaA., YangX., MiuraH. and SakaiT.: ‘Continuous static recrystallization in ultrafine-grained copper processed by multi-directional forging’, Mater. Sci. Eng. A, 2008, A478, 221–228.
24.
JiangH., ZhuY. T., ButtD. P., AlexandrovI. V. and LoweT. C.: ‘Microstructural evolution, microhardness and thermal stability of HPT-processed Cu’, Mater. Sci. Eng. A, 2000, A290, 128–138.
25.
BenchabaneG., BoumerzougZ., GloriantT. and ThibonI.: ‘Microstructural characterization and recrystallization kinetics of cold rolled copper’, Physica B, 2011, 406B, 1973–1976.
26.
ZhaoY. H., LiaoX. Z., JinZ., ValievR. Z. and ZhuY. T.: ‘Microstructures and mechanical properties of ultrafine grained 7075Al alloy processed by ECAP and their evolutions during annealing’, Acta Mater., 2004, 52, 4589–4599.
