In the present work, a constitutive model is developed to describe the flow behaviour of metastable Fe–18Cr–10Mn–0·39N (wt-) austenitic stainless steel, considering deformed microstructure of the alloy as a composite material (mixture of austenite/α′-martensite). The results of previous studies are used to validate the model. It is shown that the developed model is more appropriate to predict flow behaviour of the metastable alloy undergoing considerable martensitic transformation during deformation when compared with the modified Ludwik equation suggested in some earlier works.
LoK. H., ShekC. H. and LaJ. K. L.: Mater. Sci. Eng. R, 2009, R65, 39–104.
2.
HänninenH., RomuJ., IlolaR., TervoJ. and LaitinenA.: J. Mater. Process. Technol., 2001, 117, 424–430.
3.
MurrL. E. and StaudhammerK. P.: Metall. Trans. A, 1982, 13A, 627–635.
4.
BehjatiP. and NajafizadehA.: Metall. Mater. Trans. A, 2011, 42A, 3752–3760.
5.
LudwigsonD. C.: Metall. Trans., 1971, 12, (10), 2825–2828.
6.
LiH. B., JiangZ. H., ZhangZ. R., XuB.-Y. and LuF.-B.: ‘Mechanical properties of nickel free high nitrogen austenitic stainless steels’, Proc. Sino-Swedish Structural Materials Symp., Beijing, China, September 2007, Sino-Swedish Advanced Materials Exchange Centre, 330–334.
7.
MilititskyM., DeWispelaereN., PetrovR., RamosJ. E., RegulyA. and HänninenH.: Mater. Sci. Eng. A, 2008, A498, 289–295.
8.
SoussanA., DegallaixS. and MagninT.: Mater. Sci. Eng. A, 1991, A142, 169–176.
9.
LeeT. H., OhC. S. and KimS. J.: Scr. Mater., 2008, 58, 110–113.
10.
NarutaniT., OlsonG. B. and CohenM.: J. Phys., 1982, 12, 429–434.
11.
LeeT. H., ShinE., OhC. S., HaH. Y. and KimS. J.: Acta Mater., 2010, 58, 3173–3186.
12.
SpencerK., EmburyJ. D., ConlonK. T., VéronM. and BréchetY.: Mater. Sci. Eng. A, 2004, A387–A389, 873–881.
13.
OlsonG. B. and CohenM.: Metall. Trans. A, 1975, 6A, (4), 791–795.
14.
ShinH. C., HaT. K. and ChangY. W.: Scr. Mater., 2001, 45, 823–829.
15.
SherbyO., WadsworthJ., LesuerD. and SynC.: ‘The c/a ratio in quenched Fe–C and Fe–N steels—a heuristic story’; 2006, Vancouver, BC, Canada, THERMEC.
