The precipitation evolution in UNS S82441 duplex stainless steel during isothermal aging at 700°C was investigated using scanning electron microscopy and transmission electron microscopy. The image analysis results revealed that nitrides, carbides and σ and χ phases nucleate simultaneously, and the growth of the intermetallic phases lags behind that of nitrides and carbides. Nitrides and carbides precipitated at the ferrite/ferrite interfaces are dissolved, and the χ phase transforms to the σ phase with prolonged aging. In the initial aging stages, the granular σ and χ phases grow and coalesce according to Ostwald ripening. With a treatment time exceeding 4 h, intermetallic grains having a size larger than those of the adjacent ferrite phase grow following a normal grain growth law, while those small in size keep ripening. The grain growth process of the intermetallic phases has been verified theoretically.
OlssonJ. and GrothH. L.:‘Evaporators made of solid duplex stainless steel. A new approach to reduced costs’, Desalination, 1994, 97, 67–76.
2.
ZhangL. H., ZhangW. Y., JiangY. M., DengB., SunD. M. and LiJ.:‘Influence of annealing treatment on the corrosion resistance of lean duplex stainless steel 2101’, Electrochim. Acta, 2009, 54, 5387–5392.
3.
ZhangZ. Y., HanD., JiangY. M., ShiC. and LiJ.:‘Microstructural evolution and pitting resistance of annealed lean duplex stainless steel UNS S32304’, Nucl. Eng. Des., 2012, 243, 56–62.
4.
NilssonJ. O. and WilsonA.:‘Influence of isothermal phase transformations on toughness and pitting corrosion of super duplex stainless steel SAF 2507’, Mater. Sci. Technol., 1993, 9, 545–554.
5.
CalliariI., ZanescoM. and RamousE.:‘Influence of isothermal aging on secondary phases precipitation and toughness of a duplex stainless steel SAF 2205’, J. Mater. Sci., 2006, 41, 7643–7649.
6.
AhnY. S., KimJ. M. and JeongB. H.:‘Effect of aging treatments and microstructural evolution on corrosion resistance of tungsten substituted 2205 duplex stainless steel’, Mater. Sci. Technol., 2002, 18, 383–388.
7.
ZhangZ. Y., WangZ., JiangY., TanH., HanD., GuoY. and LiJ.:‘Effect of post-weld heat treatment on microstructure evolution and pitting corrosion behavior of UNS S31803 duplex stainless steel welds’, Corros. Sci., 2012, 62, 42–50.
8.
GuanK., XuX., XuH. and WangZ.:‘Effect of aging at 700°C on precipitation and toughness of AISI 321 and AISI 347 austenitic stainless steel welds’, Nucl. Eng. Des., 2005, 235, 2485–2494.
9.
LiuF., HwangY. H. and NamS. W.:‘The effect of post weld heat treatment on the creep-fatigue behavior of gas tungsten arc welded 308L stainless steel’, Mater. Sci. Eng. A, 2006, A427, 35–41.
10.
ChenT. H. and YangJ. R.:‘Effects of solution treatment and continuous cooling on σ-phase precipitation in a 2205 duplex stainless steel’, Mater. Sci. Eng. A, 2001, A311, 28–41.
11.
RedjaimiaA., MetauerG. and GantoisM.:Proc. Conf. Duplex Stainless Steels’91, Beaune, France, October 1991, Société Française de Métallurgie et de Matériaux, Vol. 1, 119.
12.
SasikalaG., RayS. K. and MannanS. L.:‘Kinetics of transformation of delta ferrite during creep in a type 316(N) stainless steel weld metal’, Mater. Sci. Eng. A, 2003, A359, 86–90.
13.
GillT. P. S., SharkarV., PujarM. G. and RodriguezP.:‘Effect of composition on the transformation of {delta}-ferrite to {sigma} in type 316 stainless steel weld metals’, Scr. Mater., 1995, 30, 1595–1600.
14.
ChenT. H., WengK. L. and YangJ. R.:‘The effect of high-temperature exposure on the microstructural stability and toughness property in a 2205 duplex stainless steel’, Mater. Sci. Eng. A, 2002, A338, 259–270.
15.
DobranszkyJ., SzaboP. J., BereczT., HrotkoV. and PortkoM.:‘Energy-dispersive spectroscopy and electron backscatter diffraction analysis of isothermally aged SAF 2507 type superduplex stainless steel’, Spectrochim. Acta B, 2004, 59B, 1781–1788.
16.
AdheK. M., KainV., MadangopalK. and GadiyarH. S.:‘Influence of sigma-phase formation on the localized corrosion behavior of a duplex stainless steel’, J. Mater. Eng. Perform., 1996, 5, 500–506.
17.
BaldanA.:‘Review progress in Ostwald ripening theories and their applications to nickel-base superalloys Part I: Ostwald ripening theories’, J. Mater. Sci., 2002, 37, 2171–2202.
18.
BaldanA.:‘Review progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-base superalloys. Part II: nickel-base superalloys’, J. Mater. Sci., 2002, 37, 2379–2405.
19.
RamirezA. J., LippoldJ. C. and BrandiS. D.:‘The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels’, Metall. Mater. Trans. A, 2003, 34A, 1575–1597.
20.
LeeK. M., ChoH. S. and ChoiD. C.:‘Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austenite’, J. Alloys Compd, 1999, 285, 156–161.
21.
VoorheesP. W. and GlicksmanM. E.:‘Ostwald ripening during liquid phase sintering – effect of volume fraction on coarsening kinetics’, Metall. Trans. A, 1984, 15A, 1081–1088.
22.
HillertM.:‘On the theory of normal and abnormal grain growth Sur la theorie des croissances granulaires normale et anormale Zur theorie des normalen und des anomalen kornwachstums’, Acta Metall., 1965, 13, 227–238.
23.
WangG., XuD. S., PaytonE. J., MaN., YangR., MillsM. J. and WangY.:‘Mean-field statistical simulation of grain coarsening in the presence of stable and unstable pinning particles’, Acta Mater., 2011, 59, 4587–4594.
24.
FepponJ. M. and HutchinsonW. B.:‘On the growth of grains’, Acta Mater., 2002, 50, 3293–3300.
25.
CahnJ. W.:‘On spinodal decomposition Sur la decomposition spinodale Über die umsetzung an der spinodalen’, Acta Metall., 1962, 10, 789–801.
