A novel composite solder paste with 0·07 wt- graphite addition was fabricated. The mechanical properties of matrix solder and composite solder alloys were tested using a kind of miniature joint. The results showed that the tensile strength of the Sn58Bi+graphite composite solder joint declined slightly compared with the Sn58Bi solder joint. However, the elongation of the Sn58Bi+graphite composite solder joint was ∼13 times as much as that of the Sn58Bi solder joint. Stress relaxation method, which was used to test the creep performance, was verified by nanoindentation method. The result showed that the stress relaxation method was suitable for creep testing. The creep testing results of Sn58Bi and Sn58Bi+0·07 wt- graphite solder alloys showed that the anticreep performance of Sn58Bi was improved by the addition of graphite.
AbtewM. and SelvadurayG.: ‘Lead-free solders in microelectronics’, Mater. Sci. Eng. R, 2000, R27, 95–141.
2.
ZhangK. K., LiC. Y., QiuR. F., ShiH. X. and WangY. L.: ‘Effect of Ni on growing of intermetallic compound in interface of Sn2·5Ag0·7Cu0·1RE/Cu solder joint during aging’, Mater. Sci. Technol., 2012, 28, (6), 760–765.
3.
GhoshM., GunjanM. K., DasS. K., KarA., GhoshR. N. and RayA. K.: ‘Effect of Mn on Sn–Ag–Cu ternary lead free solder alloy–Cu assembly: a comparative study’, Mater. Sci. Technol., 2010, 26, (5), 610–614.
4.
TaiF., GuoF., XiaZ. D., LeiY. P., YanY. F., LiuJ. P. and ShiY. W.: ‘Processing and creep properties of Sn–Cu composite solders with small amounts of nanosized Ag reinforcement additions’, J. Electron. Mater., 2005, 34, (11), 1357–1362.
5.
ShiY. W., LiuJ. P., YanY. F., XiaZ. D., LeiY. P., GuoF. and LiX. Y.: ‘Creep properties of composite solders reinforced with nano- and microsized particles’, J. Electron. Mater., 2008, 37, (4), 507–514.
6.
ShiY. W., YanY. F., LiuJ. P., XiaZ. D., LeiY. P., GuoF. and LiX. Y.: ‘Constitutive relations for creep in a SnCu-based composite solder reinforced with Ag particles’, J. Electron. Mater., 2009, 38, (9), 1866–1873.
7.
LeongJ. C., TsaoL. C., FangC. J. and ChuC. P.: ‘Effect of nano-TiO2 addition on the microstructure and bonding strengths of Sn3·5Ag0·5Cu composite solder BGA packages with immersion Sn surface finish’, J. Mater. Sci. Mater. Electron., 2011, 22, 1443–1449.
8.
TsaoL. C.: ‘An investigation of microstructure and mechanical properties of novel Sn3·5Ag0·5Cu–xTiO2 composite solders as functions of alloy composition and cooling rate’, Mater. Sci. Eng. A, 2011, A529, 41–48.
9.
NaiS. M. L., WeiJ. and GuptaM.: ‘Using carbon nanotubes to enhance creep performance of lead free solder’, Mater. Sci. Technol., 2008, 24, (4), 443–448.
10.
ZhangyW., ZhongY. and WangC.: ‘Effect of diamond additions on wettability and distribution of SnAgCu composite solder’, J. Mater. Sci. Technol..2012, 28, (7), 661–665.
11.
MohdSallehM. A. A., Mustafa Al BakriA. M. and Zan@HaziziM. H.: ‘Mechanical properties of Sn–0·7Cu/Si3N4 lead-free composite solder’, Mater. Sci. Eng. A, 2012, A556, 633–637.
12.
WangX., LiuY. C., WeiC., GaoH. X., JiangP. and YuL. M.: ‘Strengthening mechanism of SiC-particulate reinforced Sn–3·7Ag–0·9Zn lead-free solder’, J. Alloys Compd, 2009, 480, 662–665.
13.
ZhangR., XuG., WangX., GuoF., LeeAndre and SubramanianK. N.: ‘Electromigration in Sn–Bi modified with polyhedral oligomeric silsesquioxane’, J. Electron. Mater., 2010, 39, (12), 2513–2521.
14.
ShenJ., PengC., YinH. G. and ChenJ.: ‘Influence of minor POSS molecules additions on the microstructure and hardness of Sn3Ag0·5Cu–xPOSS composite solders’, J. Mater. Sci. Mater. Electron., 2012, 23, 1640–1646.
15.
ShiX. Q., WangZ. P., ZhouW., PangH. L. J. and YangQ. J.: ‘A new creep constitutive model for eutectic solder alloy’, ASME, J. Electron. Packag., 2002, 124, 84–90.
16.
ZhangN., YangF., ShiY. and GuoF.: ‘Compression creep of 63Sn37Pb solder balls’, Acta Mater., 2011, 59, 3156–3163.
17.
KandaY. and KariyaY.: ‘Evaluation of creep properties for Sn-Ag-Cu micro solder joint by multi-temperature stress relaxation test’, Microelectron. Reliab., 2012, 52, 1435–1440.
18.
YangL.: ‘Effects of Ag particles content on properties of Sn0·7Cu solder’, J. Mater. Sci. Mater. Electron., 2013, 24, 1405–1409.
19.
MayoM. J. and NixW. D.: ‘A micro-indentation study of superplasticity in Pb, Sn, and Sn-38 wt Pb’, Acta Metall., 1988, 36, (8), 2183–2192.
