In this paper, WC–Al composite coatings of AZ91 alloy prepared by mechanical alloying have been investigated in detail. It was found that the premixing process of composite powders has no significant effect in promoting the formation of uniform coating of WC–Al powders. Under the optimised conditions, i.e. the composition of composite powders of (10 g WC–6·5 g Al–3 g AZ91–0·5 g Mg), ball-to-powder weight ratio of 14∶1 and milling duration of 12 h, the average thickness of composite coating can be remarkably increased to 38·01 μm. Compared with the bare substrate, the Brinell hardness of the specimen with WC–Al composite coating can be significantly increased by about 90·01.
CorreaPS, MalfattiCF and AzambujaDS: ‘Corrosion behavior study of AZ91 magnesium alloy coated with methyltriethoxysilane doped with cerium ions’, Prog. Org. Coat., 2011, 72, 739–747.
SongGL: ‘The effect of texture on the corrosion behavior of AZ31 Mg alloy’, JOM, 2012, 64, 671–679.
4.
MiaoQ, CuiCE and PanJD: ‘CrN–TiN multilayer coating on magnesium alloy AZ91 by are-glow plasma depositing process’, Surf. Coat. Technol., 2007, 201, 5077–5080.
5.
LiuSF, LiB, WangXH, SuW and HanH: ‘Refinement effect of cerium, calcium and strontium in AZ91 magnesium alloy’, J. Mater. Process. Technol., 2009, 209, 3999–4004.
6.
LuoAA: ‘Magnesium: current and potential automotive applications’, JOM, 2002, 54, 42–48.
7.
KoYG, NamgungS and ShinDH: ‘Correlation between KOH concentration and surface properties of AZ91 magnesium alloy coated by plasma electrolytic oxidation’, Surf. Coat. Technol., 2010, 205, 2525–2531.
8.
KhayyaminD, MostafapourA and KeshmiriR: ‘The effect of process parameters on microstructural characteristics of AZ91/SiO2 composite fabricated by FSP’, Mater. Sci. Eng. A, 2013, A559, 217–221.
9.
Rama KrishnaL, PoshalG, JyothirmayiA and SundararajanG: ‘Compositionally modulated CGDS + MAO duplex coatings for corrosion protection of AZ91 magnesium alloy’, J. Alloys Compd, 2013, 578, 355–361.
10.
WangQ, SpencerK, BirbilisN and ZhangMX: ‘The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate’, Surf. Coat. Technol., 2010, 205, 50–56.
11.
LópezAJ, TorresB, TaltavullC and RamsJ: ‘Influence of high velocity oxygen-fuel spraying parameters on the wear resistance of Al–SiC composite coatings deposited on ZE41A magnesium alloy’, Mater. Des., 2013, 43, 144–152.
12.
RodrigoP, CampoM, TorresB, EscaleraMD, OteroE and RamsJ: ‘Microstructure and wear resistance of Al–SiC composites coatings on ZE41 magnesium alloy’, Appl. Surf. Sci., 2009, 255, 9174–9181.
13.
AraghiA and PaydarMH: ‘Electroless deposition of Ni–P–B4C composite coating on AZ91D magnesium alloy and investigation on its wear and corrosion resistance’, Mater. Des., 2010, 31, 3095–3099.
14.
StanishevskyAV, WalockMJ, ZouYJ, ImhoffL, ZairiA and NouveauC: ‘Growth of WC–Cr–N and WC–Al–N coatings in a RF–magnetron sputtering process’, Vacuum, 2013, 90, 129–134.
15.
Rezaei-SametiM, NadaliS, FalahatpishehA and RakhshiM: ‘The effects of sodium dodecyl sulfate and sodium saccharin on morphology, hardness and wear behavior of Cr–WC nano composite coatings’, Solid State Commun., 2013, 159, 18–21.
16.
MoJL and ZhuMH: ‘Tribological investigation of WC/C coating under dry sliding conditions’, Wear, 2011, 271, 1998–2005.
17.
OladijoOP, VenterAM, CornishLA and SacksN: ‘X-ray diffraction measurement of residual stress in WC–Co thermally sprayed coatings onto metal substrates’, Surf. Coat. Technol., 2012, 206, 4725–4729.
LiuHB, WanDP and HuDJ: ‘Microstructure and wear behavior of laser-textured and micro-alloyed Co-based WC and TiC composite sintered-carbide coating’, J. Mater. Process. Technol., 2009, 209, 805–810.
20.
HsiaoWT, SuCY, HuangTS and LiaoWH: ‘Wear resistance and microstructural properties of Ni–Al/h-BN/WC–Co coatings deposited using plasma spraying’, Mater. Charact., 2013, 79, 84–92.
21.
LuL, LaiMO and ZhangS: ‘Diffusion in mechanical alloying’, J. Mater. Process. Technol., 1997, 67, 100–104.
22.
MohammadnezhadM, ShamanianM, EnayatiMH and SalehiM: ‘Influence of annealing temperature on the structure and properties of the nanograined NiAl intermetallic coatings produced by using mechanical alloying’, Surf. Coat. Technol., 2013, 217, 64–69.
23.
PourhosseiniJ, ZakeriM, RahimipourMR, SalahiE and PourhosseiniGhR: ‘Preparation of FeAl–Al2O3 nanocomposite via mechanical alloying and subsequent annealing’, Mater. Sci. Technol., 2010, 26, 1132–1136.
24.
WillardMA and FrancoV: ‘The role of microstructure and processing on magnetic properties of materials’, JOM, 2013, 64, 851–852.
25.
ZadorozhnyyV, KaloshkinS, KaevitserE and RomankovS: ‘Coating of metals with intermetallics by mechanical alloy’, J. Alloys Compd, 2011, 509, 507–509.
26.
Robles-HernándezFC and CalderonHA: ‘Nanostructured metal composites reinforced with fullerenes’, JOM, 2010, 62, 63–68.
27.
Esquivel-GonzalezR, Dorantes-RosalesHJ, López-HirataVM, González-VelázquezJL, Contreras-PiedrasE, Saucedo-MuňozML and Hernández SantiagoF: ‘Phase transformations induced by mechanical alloying of Ag–28 at. Al alloy’, Mater. Sci. Technol., 2010, 26, 53–57.
28.
ZouXG and ZouY: ‘Synthesis and thermal stability of novel amorphous Al70Fe25Zr5 alloy prepared by mechanical alloying’, Mater. Sci. Technol., 2009, 25, 790–793.
29.
AğaoğullariD, GökçeH, Dumanİ and Lüufi ÖveçoğluM: ‘Characterization investigations of ZrB2/ZrC ceramic powders synthesized by mechanical alloying of elemental Zr, B and C blends’, J. Eur. Ceram. Soc., 2012, 32, 1447–1455.
30.
YanJM, MaXF, ZhaoW, TangHG, ZhuCJ and CaiSG: ‘Synthesis and characterization of (W0·8Al0·2)C0·8 deduction solid solution’, Mater. Sci. Eng. B, 2005, 117B, 321–324.
31.
RomankovS, HayasakaY, ShchetininIV, KasaiE, KomarovSV and YoonJM: ‘Investigation of structural formation of Al–SiC surface composite under ball collisions’, Mater. Sci. Eng. A, 2011, A528, 3455–3462.
32.
MolladavoudiA, AmirkhanlouS, ShamanianM and AshrafizadehF: ‘The production of nanocrystalline cobalt titanide intermetallic compound via mechanical alloying’, Intermetallics, 2012, 29, 104–109.
33.
MengYF, ShenYF, ChenC, LiYC and FengXM: ‘Effect of Cu content and mechanical alloying parameters on the preparation of W–Cu composite coatings on copper substrate’, J. Alloys Compd, 2014, 585, 368–375.
34.
RomankovS, KaloshkinSD, HayasakaY, HayashiN, KasaiE and KomarovSV: ‘Effects of process parameters on the formation of Ti–Al coatings fabricated by mechanical milling’, J. Alloys Compd, 2009, 484, 665–673.
35.
PouriamaneshR, Vahdati-KhakiJ and MohammadiQ: ‘Coating of Al substrate by metallic Ni through mechanical alloying’, J. Alloys Compd, 2009, 488, 430–436.
