Novel Cr containing Co-Al-W base superalloys were studied by atom probe tomography and neutron diffraction. Cr is found to predominantly partition to the γ matrix and decrease partitioning of W to γ′. Furthermore, Cr significantly enhances the γ′ volume fraction, decreases the γ/γ′ lattice misfit and deteriorates the creep resistance. Addition of Ni to the Cr containing alloys affects partitioning of W and Al, further decreases the lattice misfit and results in the formation of irregularly shaped precipitates. Al, W and Cr tend to occupy the ‘B'sublattice in the γ′-A3B phase (L12 type), while Co and Ni reside in the ‘A’ sublattice.
SuzukiA. and PollockT. M.: ‘High-temperature strength and deformation of c/c’ two-phase Co-Al-W-base alloys’, Acta Mater.,2008, 56, 1288–1297. doi: 10.1016/j.actamat.2007.11.014
4.
PollockT. M., DibbernJ., TsunekaneM., ZhuJ. and SuzukiA.: ‘New Co-based c-c’ high-temperature alloys’, JOM,2010, 62, 58–63. doi: 10.1007/s11837-010-0013-y
5.
BauerA., NeumeierS., PyczakF. and GokenM.: ‘Microstructure and creep strength of different c/c'-strengthened Co-base superalloy variants’, Scr. Mater.,2010, 63, 1197–1200. doi: 10.1016/j.scriptamat.2010.08.036
6.
OmoriT., OikawaK., SatoJ., OhnumaI., KattnerU. R., KainumaR. and IshidaK.: ‘Partition behavior of alloying elements and phase transformation temperatures in Co-Al-W-base quaternary systems’, Intermetallics,2013, 32, 274–283. doi: 10.1016/j.intermet.2012.07.033
7.
YanH.-Y., VorontsovV. A. and DyeD.: ‘Alloying effects in polycrystalline c’ strengthened Co-Al-W base alloys’, Intermetallics,2014, 48, 44–53. doi: 10.1016/j.intermet.2013.10.022
8.
StottF. H., WoodG. C. and StringerJ.: ‘The influence of alloying elements on the development and maintenance of protective scales’, Oxid. Met.,1995, 44, 113–145. doi: 10.1007/BF01046725
9.
KleinL., ShenY., KillianM. S. S. and VirtanenS.: ‘Effect ofB and Cr on the high temperature oxidation behaviour of novel c/c'-strengthened Co-base superalloys’, Corros. Sci.,2011, 53, 2713–2720. doi: 10.1016/j.corsci.2011.04.020
10.
BauerA., NeumeierS., PyczakF. and GokenM.: ‘Creep strength and microstructure of polycrystalline c9-strengthened cobalt-base superalloys’, in ‘Superalloys 2012’, (ed. HuronE. S., ) 695–703; 2012, New York, John Wiley & Sons, Inc.
11.
TitusM. S., SuzukiA. and PollockT. M.: ‘Creep and directional coarsening in single crystals of new c-c’ cobalt-base alloys’, Scr. Mater.,2012, 66, 574–577. doi: 10.1016/j.scriptamat.2012.01.008
12.
PovstugarI., ChoiP. P., NeumeierS., BauerA., ZenkC. H., GokenM. and RaabeD.: ‘Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation’, Acta Mater.,2014, 78, 78–85. doi: 10.1016/j.actamat.2014.06.020
13.
ShinagawaK., OmoriT., SatoJ., OikawaK., OhnumaI., KainumaR. and IshidaK.: ‘Phase equilibria and microstructure on c9 phase in Co-Ni-Al-W system’, Mater. Trans.,2008, 49, 1474–1479. doi: 10.2320/matertrans.MER2008073
14.
ShinagawaK., OmoriT., OikawaK., KainumaR. and IshidaK.: ‘Ductility enhancement by boron addition in Co-Al-W high-temperature alloys’, Scr. Mater.,2009, 61, 612–615. doi: 10.1016/j.scriptamat.2009.05.037
15.
HoelzelM., SenyshynA., JuenkeN., BoysenH., SchmahlW. and FuessH.: ‘High-resolution neutron powder diffractometer SPODI at research reactor FRM II’, Nucl. Instrum. Methods Phys. Res. A,2012, 667, 32–37. doi: 10.1016/j.nima.2011.11.070
16.
ThompsonK., LawrenceD., LarsonD. J., OlsonJ. D., KellyT. F. and GormanB.: ‘In situ site-specific specimen preparation for atom probe tomography’, Ultramicroscopy,2007, 107, 131–139. doi: 10.1016/j.ultramic.2006.06.008
17.
Van SluytmanJ. S. and PollockT. M.: ‘Optimal precipitate shapes in nickel-base c-c’ alloys’, Acta Mater.,2012, 60, 1771–1783. doi: 10.1016/j.actamat.2011.12.008
18.
BlavetteD., CadelE. and DeconihoutB.: ‘The role of the atom probe in the study of nickel-based superalloys’, Mater. Charact.,2000, 44, 133–157. doi: 10.1016/S1044-5803(99)00050-9
19.
SinghA. R. P., NagS., ChattopadhyayS., RenY., TileyJ., ViswanathanG. B., FraserH. L. and BanerjeeR.: ‘Mechanisms related to different generations of c9 precipitation during continuous cooling of a nickel base superalloy’, Acta Mater.,
20.
MeherS., NagS., TileyJ., GoelA. and BanerjeeR.: ‘Coarsening kinetics of c’ precipitates in cobalt-base alloys’, Acta Mater.,2013, 61, 4266–4276.
21.
YamaguchiY., TakahashiJ. and KawakamiK.: ‘The study of quantitativeness in atom probe analysis of alloying elements in steel’, Ultramicroscopy,2009, 109, 541–544. doi: 10.1016/j.ultramic.2008.11.017
22.
PyczakF., BauerA., GokenM., LorenzU., NeumeierS., OehringM., PaulJ., SchellN., SchreyerA., StarkA. and SymanzikF.: ‘The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys’, J. Alloys Compd,2015, 632, 110–115. doi: 10.1016/j.jallcom.2015.01.031
23.
MishimaY., OchiaiS. and SuzukiT.: ‘Lattice parameters of Ni(c), Ni3Al(c9) and Ni3Ga(c9) solid solutions with additions of transition and B-subgroup elements’, Acta Metall.,1985, 33, 1161–1169. doi: 10.1016/0001-6160(85)90211-1
24.
TanakaK., OoshimaM., TsunoN., SatoA. and InuiH.: ‘Creep deformation of single crystals of new Co-Al-W-based alloys with fcc/L12 two-phase microstructures’, Philos. Mag.,2012, 92, 4011–027. doi: 10.1080/14786435.2012.700416
25.
BauerA., NeumeierS., PyczakF., SingerR. F. F. and GokenM.: ‘Creep properties of different c’ -strengthened Co-base superalloys’, Mater. Sci. Eng. A, 2012, A550, 333–341. doi: 10.1016/j.msea.2012.04.083
