Characterisation of copper slag in view of metal recovery

Abstract

In this study, the copper bearing particle of a fayalitic copper slag was assessed using quantitative evaluation of minerals by scanning electron microscopy (QEMSCAN) and X-ray computed tomography (CT). The copper content of the slag was ∼0·87 wt-%. Copper in this slag was present as sulphidic droplets. The content and particle size distribution of the major sulphide phases (bornite, chalcopyrite and chalcocite/digenite) were quantified using QEMSCAN. The copper bearing particles had a wide particle size distribution from a few micrometres up to millimetre level. Large copper bearing particles (>100 μm) were composed mainly of bornite and chalcocite/digenite and tended to accumulate in the lower part of the slag layer. As characterised with CT, ∼70% of the copper value was present in these large copper bearing particles.

Keywords

Copper slag Characterisation QEMSCAN Copper sulphides Particle size distribution CT

Get full access to this article

View all access options for this article.

References

Altundogan,

H. S.

, Boyrazli,

and Tumen,

2004. A study on the sulphuric acid leaching of copper converter slag in the presence of dichromate, Miner. Eng., 17, 465–467.

Banza,

A. N.

, Gock,

and Kongolo,

2002. Base metals recovery from copper smelter slag by oxidising leaching and solvent extraction, Hydrometallurgy, 67, 63–69.

Cardona,

, Coursol,

, Mackey,

P. J.

and Parra,

2011. Physical chemistry of copper smelting slags and copper losses at the Paipote smelter. Part 1, Thermodynamic modelling., Can. Metall. Q., 50, 318–329.

Das,

, Mishra,

B. K.

, Angadi,

, Pradhan,

S. K.

, Prakash,

and Mohanty,

2010. Characterization and recovery of copper values from discarded slag, Waste Manage. Res., 28, 561–567.

Davenport,

W. G.

, King,

, Schlesinger,

and Biswas,

A. K.

2002. Extractive metallurgy of copper, Oxford, UK, Pergamon.

Ghorbani,

, Becker,

, Petersen,

, Morar,

S. H.

, Mainza,

and Franzidis,

J. P.

2011. Use of X-ray computed tomography to investigate crack distribution and mineral dissemination in sphalerite ore particles, Miner. Eng., 24, 1249–1257.

González,

, Parra,

, Klenovcanova,

, Imris,

and Sánchez,

2005. Reduction of Chilean copper slags a case of waste management project, Scand. J. Metall., 34, 143–149.

Premchand

Gorai,

and Jana,

R. K.

2003. Characteristics and utilisation of copper slag—a review, Resour. Conserv. Recycl., 39, 299–313.

Heo,

J. H.

, Kim,

B. S.

and Park,

J. H.

2014. Effect of CaO addition on iron recovery from copper smelting slags by solid carbon, Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci., 45, 328–328.

10.

Higgins,

M. D.

2000. Measurement of crystal size distributions, Am. Mineral., 85, 1105–1116.

11.

Jalkanen,

, Vehviläinen,

and Poijärvi,

2003. Copper in solidified copper smelter slags, Scand. J. Metall., 32, 65–70.

12.

Kucharski,

, Sak,

, Madej,

, Wedrychowicz,

and Mroz,

2014. A study on the copper recovery from the slag of the Outokumpu direct-to-copper process, Metall. Mater. Trans. B: Process Metall. Mater. Process. Sci., 45, 590–602.

13.

Li,

Y. J.

, Papangelakis,

V. G.

and Perederiy,

2009. High pressure oxidative acid leaching of nickel smelter slag: characterization of feed and residue, Hydrometallurgy, 97, 185–193.

14.

Liu,

, Gupta,

, Sharma,

, Wall,

, Butcher,

, Miller,

, Gottlieb,

and French,

2005. Mineral matter–organic matter association characterisation by QEMSCAN and applications in coal utilisation, Fuel, 84, 1259–1267.

15.

Matjie,

R. H.

, French,

, Ward,

C. R.

, Pistorius,

P. C.

and Li,

2011. Behaviour of coal mineral matter in sintering and slagging of ash during the gasification process, Fuel Process. Technol., 92, 1426–1433.

16.

Mertens,

2009. Characterization of historical mortars and mineralogical study of physicchemical reactions on the pozzolan-lime binder interface. PhD thesis, Katholieke Universiteit Leuven, Leuven, Belgium.

17.

Miller,

J. D.

, Lin,

C. -L.

, Hupka,

and Al-Wakeel,

M. I.

2009. Liberation-limited grade/recovery curves from X-ray micro CT analysis of feed material for the evaluation of separation efficiency, Int. J. Miner. Process., 93, 48–53.

18.

Miller,

J. D.

and Lin,

C. L.

2004. Three dimensional analysis of particulates in mineral processing systems by cone beam X-ray microtomography, Miner. Metall. Process., 21.

19.

Miller,

J. D.

, Lin,

C. L.

, Garcia,

and Arias,

2003. Ultimate recovery in heap leaching operations as established from mineral exposure analysis by X-ray microtomography, Int. J. Miner. Process., 72, 331–340.

20.

Pandelaers,

2011. Ferro-alloy dissolution in liquid steel. PhD thesis, Katholieke Universiteit Leuven, Leuven, Belgium.

21.

Pascoe,

R. D.

, Power,

M. R.

and Simpson,

2007. QEMSCAN analysis as a tool for improved understanding of gravity separator performance, Miner. Eng., 20, 487–495.

22.

Peterson,

T. D.

1996. A refined technique for measuring crystal size distributions in thin section, Contrib. Miner. Petrol., 124, 395–405.

23.

Remeysen,

2006. Combination of medical computed tomography microfocus computed tomography and petrography in reservoir characterization. PhD thesis, Katholieke Universiteit Leuven, Leuven, Belgium.

24.

Wang,

, Daneel,

, Padilla Tinoco,

S. V.

, Sun,

, Jones,

P. T.

, Van Gerven,

and Blanpain,

2011. Characterization of copper slag in the view of copper beneficiation. Proc. Copper Metallurgy, Krakow.

25.

Yang,

, Lin,

, Lu,

, He,

, Liao,

and Ke,

2014. Effect of CaO/SiO2 ratio on the preparation and crystallization of glass-ceramics from copper slag, Ceram. Int., 40, 7297–7305.