Formation and removal of hang-ups in ore passes

Abstract

Ore and waste rock flow through ore passes can be improved by reducing contributing factors to formation of hang-ups and by selection of the most suitable methods of bringing formed arches down. The prevailing factors contributing to the formation of hang-ups are consolidation and compaction of material and constriction in the ore passes. When rock material is too coarse in relation to the diameter of the ore pass, blocks of rock can wedge forming interlocked arches. When material is too fine, cohesive arches can form. Methods of removing hang-ups include the use of explosives or water. Explosives can be used to bomb the surface of the hang-ups, be inserted into the hang-ups or inserted through bore holes drilled to the hang-ups from the surrounding excavations. Water can be poured from above, jetted from below or injected at high pressure through bore holes. Depending on the type and location of hang-ups, the most suitable method can be selected.

Keywords

ORE PASSES MINING METHODS MATERIAL HANDLING ORE FLOW UNDERGROUND MINING

Get full access to this article

View all access options for this article.

References

Beus

M. J.

, Pariseau

W. G.

, Steward

B. M.

and Iverson

S. R.

: in ‘Underground mining methods, engineering fundamentals and international case studies’, (ed. Hulstruid

W. A.

and Bullock

R. L.

), 627–634; 2001, Society of Mining, Metallurgy and Exploration, Littleton, Colorado, USA.

Emmerich

S. H.

: Proc. Symp. on ‘Ore passes and combustible material underground’, 1992, Association of Mine Managers of South Africa, 83–111.

Flint

D. C.

, Sinuhadji

, Setyoko

T. B.

and Kalangi

: Proc. AusIMM, Australasian Institute of Mining and Metallurgy. Conf. on ‘Ninth underground operators’, Perth, Australia, May 2005, 53–56.

Goodwill

D. J.

, Craig

D. A.

and Cabrejos

: Bulk Solids Handling, 1999, 19, 13–21.

Hadjigeorgiou

, Lessard

J. F.

and Mercier-Langevin

: J. South Afr. Inst. Min. Metall., Dec. 2005, 105, 809–816.

Hambley

D. F.

: CIM Bull., Jan. 1987, 80, (897), 25–30.

Lessard

J. F.

and Hadjigeorgiou

: Proc. ISRM Conf. on ‘Technology roadmap for rock mechanics’, Sandton, SouthAfrica, September 2003, South African Institute of Mining and Metallurgy, 1–6.

Lessard

J. F.

and Hadjigeorgiou

: Proc. Int. Symp. on ‘Mine planning and equipment selection’, Kalgoorlie, Australia, Australasion Institute of Mining and Metallurgy (AusIMM), April 2003, 509–521.

Engineering

MacLean

and Marketing Co. Ltd: Technical Specification, Operating system - SB-12 Blockholer, available at: <http://www.macleanengineering.com/>

10.

Micke

and Gavrilovic

M. A.

: Proc. 25th Annual Conf. On ‘Explosives and blasting technique’, Nashville, TN, USA, February 1999, International Society of Explosive Engineers.

11.

Orica: Technical Data Sheet – Ballistic Disc 260, available at: www.oricaminingservices.com

12.

RockTek USA: QuickDraw, Technical Information, available at: http://www.rocktek.com

13.

Stacey

T. R.

and Erasmus

B. J.

: J. South Afr. Inst. Min. Metall., Dec. 2005, 105, 745–752.

14.

Stewart

, Iverson

and Beus

: Min. Eng., March 1999, 53–60.

15.

Tamrock: Technical Specification 05131-2, Commando 300 R, 2005, available at: www.tamrock.com