Multilayer plug concept to enhance thickness distribution control of deep thermoformed parts

Abstract

A multilayer plug, consisting of a set of concentric layers with independent movements, is proposed to enhance control of the final thickness distribution of deep thermoformed parts. The concept is validated experimentally and the results are compared with the predictions produced by the T-SIM software package. Given the good approximation between experimental and theoretical data, T-SIM was used to evaluate the influence of several multilayer plug parameters on the final thickness distribution. Changing the relative displacement of the plug layers together with the total plug displacement leads to a range of thickness contours, including profiles with a localised overthickness, or with a smooth thickness variation. The role of the displacement of the outer and inner plug layers is also assessed, showing that the former influences mainly the upper sidewall of the part, whereas the latter determines the thickness of the base.

Keywords

PLUG-ASSISTED THERMOFORMING MULTILAYER PLUG THICKNESS DISTRIBUTION

Get full access to this article

View all access options for this article.

References

Harron

G. W.

, Harkin-Jones

E. M. A.

and Martin

: Proc. Int. Conf SPE ANTEC 2000 , Orlando, Florida, USA, May 2000, The Society of Plastics Engineering, paper 699.

Throne

: Technology of thermoforming , 1996, New York, Hanser Publishers, Munich.

Nam

G. J.

, Rhee

H. W.

and Lee

J. W.

: Proc. Int. Conf SPE ANTEC 1999 , New York, USA, May 1999, The Society of Plastics Engineering, 836-841.

Novotny

and Saha

, Proc. Int. Conf SPE ANTEC 1999 , New York, USA, May 1999, The Society of Plastics Engineering, 802–807.

McColl

, Martin

and Harkin-Jones

E. M. A.

: Plast. Rubber and Comp. , 2006, 35, 340–347.

DiRaddo

and Meddad

: Plast. Rubber and Comp .: 2000, 29, 163–167

Aroujalian

, Ngadi

M. O.

, and Emod

: Polym. Eng. Sci .: 1997, 37, 178–188.

Harron

G. W.

, Harkin-Jones

E. M. A.

and Martin

: Proc. Int. Conf SPE ANTEC 2001 , Dallas, USA, May 2001, The Society of Plastics Engineering, paper 163.

Collins

, Martin

and Harkin-Jones

E. M. A.

: Proc. Int. Conf SPE ANTEC 2001 , Dallas, USA, May 2001, The Society of Plastics Engineering, paper 162

10.

Collins

, Harkin-Jones

E. M. A.

and Martin

: Proc. XVIII Annual Meeting of the Polymer Processing Society , Guimardes, Portugal, Jun 2002, paper 202.

11.

Collins

, Harkin-Jones

E. M. A.

and Martin

: Inter. Polym. Proc .: 2002, 17, 361–369.

12.

T-SIM Software version 4.32, Computer simulation of thermo-forming, Accuform, Chekz Republic (2001).

13.

Duarte

F. M.

, Covas

J. A.

, Barroso

V. C.

and Maia

J. M.

: A computational study on the influence of the rheological behaviour of polystyrene and its blends on their thermoforming ability, J. Polymer Eng. , 2005, 25, 115–147.

14.

Ghafur

M. O.

, Koziey

and Vlachopoulos

, in Rheological Fundamentals of Polymer Processing , (ed. Covas

J. A.

et al.) 1995, Dordrecht, Kluwer Academic Publishers.

15.

Delorenzi

H. G.

and Nied

H. F.

(1991), in Modeling of Polymer Processing, (ed. Isayev

A. I.

), 1991, Munich, Hanser Verlag.

16.

McCool

, Martin

and Harkin-Jones

E. M. A.

: Proc. XXIII Annual Meeting of the Polymer Processing Society , Salvador, Brazil, Jun 2007, paper P02-006.