In this study, mechanical and dielectric properties of epoxy nanocomposites with two types of graphene, < 10 layer stacks (GEC10) and < 30 layer stacks (GEC30) were investigated. Results showed that the number of graphene layers remarkably affected the dielectric properties of epoxy nanocomposites. The real and imaginary parts of relative permittivity and loss tangent of GEC10 samples were noticeably enhanced and reached to 1.29, 20 and 15.6 times respectively for 1 wt-% graphene sample compared to GEC30 samples. Meanwhile, tensile tests showed a peak for tensile strength of GEC10 and GEC30 samples with 0.1 wt-% graphene, which improved by 13 and 7.9% with respect to pure epoxy respectively. In addition, flexural properties did not change significantly compared to the pure epoxy.
KuillaT., BhadraS., YaoD., KimN. H., BoseS. and LeeJ. H.: ‘Recent advances in graphene based polymer composites’, Prog. Polym. Sci., 2010, 35, 1350–1375. doi: 10.1016/j.progpolymsci.2010.07.005
3.
WajidA. S., DasS., IrinF., Tanvir AhmedH. S., ShelburneJ. L., ParvizD., FullertonR. J., JankowskiA. F., HeddenR. C. and GreenM. J.: ‘Polymer-stabilized graphene dispersions at high concentrations in organic solvents for composite production’, Carbon, 2012, 50, 526–534. doi: 10.1016/j.carbon.2011.09.008
4.
GalpayaD., WangM., LiuM., MottaN., WaclawikE. and YanC.: ‘Recent advances in fabrication and characterization of graphene-polymer nano composites’, Graphene, 2012, 1, 30–49. doi: 10.4236/graphene.2012.12005
5.
JinhongD. and ChengH. M.: ‘The fabrication, properties, and uses of graphene/polymer composites’, Macromol. Chem. Phys., 2012, 213, 1060–1077. doi: 10.1002/macp.201200029
6.
RafieeM. A., RafieeJ., WangZ., SongH., YuZ. Z. and KoratkarN.: ‘Enhanced mechanical properties of nanocomposites at low graphene content’, ACS Nano, 2009, 3, 3884–3890. doi: 10.1021/nn9010472
7.
SinghV., JoungD., ZhaiL., DasS., KhondakerS. I. and SealS.: ‘Graphene based materials: Past, present and future’, Prog. Mater. Sci., 2011, 56, 1178–1271. doi: 10.1016/j.pmatsci.2011.03.003
8.
PottsJ. R., DreyerD. R., BielawskiC. W. and RuoffR. S.: ‘Graphene-based polymer nanocomposites’, Polymer, 2011, 52, 5–25. doi: 10.1016/j.polymer.2010.11.042
9.
NavoselovK. S., GeimA. K., MorozovS. V., JiangD., ZhangY., DubonosS. V., GrigorievaI. V. and FirsovA. A.: ‘Electric field effect in atomically thin carbon films’, Science, 2004, 306, 666–669. doi: 10.1126/science.1102896
10.
YangS. Y., LinW. N., HuangY. L., TienH. W., WangJ. Y., MaC. C. M., LiS. M. and WangY. S.: ‘Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites’, Carbon, 2011, 49, 793–803. doi: 10.1016/j.carbon.2010.10.014
11.
ChatterjeeS., WangJ. W., KuoW. S., TaiN. H., SalzmannC., LiW. L., HollertzR., NüeschF. A. and ChuB. T. T.: ‘Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites’, Chem. Phys. Lett., 2012, 531, 6–10. doi: 10.1016/j.cplett.2012.02.006
12.
ZaI., LeH., LuongL. and MaJ.: ‘A facile approach to epoxy/graphene platelets nano composites’, ‘Proc. 18th Int. Conf. on ‘Composite materials’, Jeju, Korea, August’; 2011.
13.
RafiqR., CaiD., JinJ. and SongM.: ‘Increasing the toughness of nylon 12 by the incorporation of functionalized grapheme’, Carbon, 2010, 48, 4309–4314. doi: 10.1016/j.carbon.2010.07.043
14.
WangX., XingW., ZhangP., SongL., YangH. and HuY.: ‘Covalent functionalization of graphene with organosilane and its use as a reinforcement in epoxy composites’, Compos. Sci. Technol., 2012, 72, 737–743. doi: 10.1016/j.compscitech.2012.01.027
15.
RamanathanT., AbdalaA. A., StankovichS., DikinD. A., Herrera-AlonsoM., PinerR. D., AdamsonD. H., SchnieppH. C., ChenX., RuoffR. S., NguyenS. T., AksayI. A., Prud'HommeR. K. and BrinsonL. C.: ‘Functionalized graphene sheets for polymer nano composites’, Nat. Nanotechnol., 2008, 3, 327–331. doi: 10.1038/nnano.2008.96
16.
CaoY., FengJ. and WuP.: ‘Preparation of organically dispersible graphene nanosheet powders through a lyophilization method and their poly(lactic acid) composites’, Carbon, 2010, 48, 3834–3839. doi: 10.1016/j.carbon.2010.06.048
17.
TkalyaE., GhislandiM., de WithG. and KoningC. E.: ‘The use of surfactants for dispersing carbon nanotubes and graphene to make conductive nano composites’, Curr. Opin. Colloid Interface Sci., 2012, 17, 225–232. doi: 10.1016/j.cocis.2012.03.001
18.
TienD. H., ParkJ., HanS. A., AhmadM. and SeoV.: ‘Elecrtrical and thermal conductivites of stycast 1266 epoxy/graphene composites’, Korean Phys. Soc., 2011, 59, 2760–2746. doi: 10.3938/jkps.59.2760
BellisG. D., TamburranoA., DinescuA., SantarelliM. L. and SartoM. S.: ‘Electromagnetic properties of composites containing graphite nanoplatelets at radio frequency’, Carbon, 2011, 49, 4291–4300. doi: 10.1016/j.carbon.2011.06.008
21.
TengC. C., MaC. C. M., LuC. H., YangS. Y., LeeS. H., HsiaoM. C., YenM. Y., ChiouK. C. and LeeT. M.: ‘Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites’, Carbon, 2011, 49, 5107–5116. doi: 10.1016/j.carbon.2011.06.095
22.
GuoP., SongH., ChenX., MaL., WangG. and WangF.: ‘The reinforcing effect of GNSs on the cryogenic mechanical properties of epoxy resins’, Compos. Sci. Technol., 2012, 72, 1581–1587. doi: 10.1016/j.compscitech.2012.06.021
23.
EqraR., JanghorbanK. and DaneshmaneshH.: ‘Mechanical properties and toughening mechanism of epoxy/graphene nanocomposites’, J. Polym. Eng., 2015, 35, 257–266.
24.
RodilS. V., ParedesJ. I., AlonsoA. M. and TascónJ. M. D.: ‘Preparation of graphene dispersions and graphene-polymer composites in organic media’, Mater. Chem., 2009, 19, 3591–3593. doi: 10.1039/b904935e
25.
de PaulaA. L. and BarrosoJ. J.: ‘Comparative study of the teflon electromagnetic parameters (permittivity and permeability) experimentally obtained and numerically simulated’, ‘Proc. Int. Microwave & Optoelectronics Conf., Belem, Brazil, November’; 2009.
