Liquid phase sintering is commonly used in powder metallurgy to improve physical properties through densification enhancement. With the aim of combining the advantages of liquid phase sintering and the use of promising alloying elements such as Mn and Si, liquid promoters with complex compositions were designed to provide a low melting point to form a liquid phase below the common sintering temperatures. The properties of these liquid phases were characterised in terms of contact angle, spreading evolution and infiltration. Using a Krüss drop shape analysis system, both wetting angle experiments and infiltration experiments were performed by changing the substrate characteristics from sintered to green iron specimens respectively. The discussion is based on the different features found for these liquids compared with copper, which is a well known liquid phase former used for improving the properties of low alloy steels. Simulations of the thermodynamic and kinetic processes taking place were performed by combining ThermoCalc and DICTRA software analysis.
KhraisatW. and NyborgL.:‘Liquid phase sintering of ferrous powder by carbon and phosphorus control’, Powder Metall., 2003, 46, (3), 265–270.
4.
MocarskiS., HallD. W., ChernenkoffR. A., YeagerD. A. and McHughC. O.:‘Master alloys to obtain premixed hardenable powder metallurgy steels’, Powder Metall., 1996, 39, (2), 130–137.
5.
SarasolaM., Gomez-AceboT. and CastroF.:‘Microstructural development during liquid phase sintering of Fe and Fe–Mo alloys containing elemental boron additions’, Powder Metall., 2005, 48, (1), 59–67.
6.
XiuZ., SalwenA., QinX., HeF. and SunX.:‘Sintering behaviour of iron–molybdenum steels with the addition of Fe–B–C master alloy powders’, Powder Metall., 2003, 46, (2), 171–174.
7.
GermanR., SuriP. and ParkS.:‘Review: liquid phase sintering’, J. Mater. Sci., 2009, 44, (1), 1–39.
8.
GermanR., BuschowK. H. J., RobertW. C., MertonC. F., BernardI., EdwardJ. K., SubhashM. and PatrickV.:‘Liquid phase sintering: metals’, in ‘Encyclopedia of materials: science and technology’, (ed. Jürgen BuschowK. H..), 4601–4603; 2001, Oxford, Elsevier.
9.
EustathopoulusN., NicolasM. G. and DrevetB.:‘Chapter 3 methods of measuring wettability parameters’, Pergamon Mater. Ser., 1999, 3, 106–147.
10.
DezellusO. and EustathopoulosN.:‘Fundamental issues of reactive wetting by liquid metals’, J. Mater. Sci., 2010, 45, (16), 4256–4264.
11.
SaizE., BenhassineM., de ConinckJ. and TomsiaA. P.:‘Early stages of dissolutive spreading’, Scr. Mater., 2010, 62, (12), 934–938.
12.
SaizE. and TomsiaA. P.:‘Atomic dynamics and Marangoni films during liquid-metal spreading’, Nat. Mater., 2004, 3, (12), 903–909.
13.
SaizE. and TomsiaA. P.:‘Kinetics of high-temperature spreading’, Curr. Opin. Solid State Mater. Sci., 2005, 9, (4–5), 167–173.
14.
SaizE., TomsiaA. P. and CannonR. M.:‘Ridging effects on wetting and spreading of liquids on solids’, Acta Mater., 1998, 46, (7), 2349–2361.
15.
WheelerD., WarrenJ. A. and BoettingerW. J.:‘Modeling the early stages of reactive wetting’, Phys. Rev. E, 2010, 82E, (5), 051601.
16.
YinL., MurrayB. T., SuS., SunY., EfraimY., TaitelbaumH. and SinglerT. J.:‘Reactive wetting in metal–metal systems’, J. Phys.: Condes. Matter, 2009, 21, (46), 11.
17.
PetzowG. and HuppmannW. J.:‘Liquid phase sintering – densification and microstructural development’, Z. Metallkde., 1976, 67, 579–590.
18.
WarrenJ. A., BoettingerW. J. and RoosenA. R.:‘Modeling reactive wetting’, Acta Mater., 1998, 46, (9), 3247–3264.
19.
YostF. G., SackingerP. A. and O'TooleE. J.:‘Energetics and kinetics of dissolutive wetting processes’, Acta Mater., 1998, 46, (7), 2329–2336.
20.
YinL., MurrayB. T. and SinglerT. J.:‘Dissolutive wetting in the Bi–Sn system’, Acta Mater., 2006, 54, (13), 3561–3574.
21.
KozlovaO., VoytovychR., ProtsenkoP. and EustathopoulosN.:‘Non-reactive versus dissolutive wetting of Ag–Cu alloys on Cu substrates’, J. Mater. Sci., 2010, 45, (8), 2099–2105.
22.
ProtsenkoP., KozovaO., VoytovychR. and EustathopoulosN.:‘Dissolutive wetting of Si by molten Cu’, J. Mater. Sci., 2008, 43, (16), 5669–5671.
23.
YinL., MeschterS. J. and SinglerT. J.:‘Wetting in the Au–Sn system’, Acta Mater., 2004, 52, (10), 2873–2888.
24.
LesnikN., PestunT. and EremenkoV.:Poroshkovaya Metall., 1971, 94, (83), 849–853.
25.
NaidichY., ZabugaV. and PerevertailoV.:Adgeziya Rasplavov I Paika Materialov, 1992, 27, 23.
26.
SaizE., HwangC. W., SuganumaK. and TomsiaA. P.:‘Spreading of Sn–Ag solders on FeNi alloys’, Acta Mater., 2003, 51, (11), 3185–3197.
27.
AmbroseJ. C., NicholasM. G. and StonehamA. M.:‘Dynamics of liquid-drop spreading in metal–metal systems’, Acta Metall. Mater., 1993, 41, (8), 2395–2401.
28.
ProtsenkoP., GarandetJ. P., VoytovychR. and EustathopoulosN.:‘Thermodynamics and kinetics of dissolutive wetting of Si by liquid Cu’, Acta Mater., 2010, 58, (20), 6565–6574.
29.
MarangoniC. G. M.:Ann. Phys. (Poggendorff), 1871, 143, 337.
30.
NaidichY. V. and ZabugaV. V.:‘Concentration-capillary convection (Marangoni effect) in liquid-metals’, Russ. Metall., 1992, (4), 36–42.
31.
DlapkaM., DanningerH., GierlC. and LindqvistB.:‘Defining the pores in PM components’, Met. Powder Rep., 2010, 65, (2), 30–33.
SemlakK. A. and RhinesF. N.:‘The rate of infiltration of metals’, Trans. AIME, 1958, 212, 325–331.
34.
RangaswamyS. and FortunaD.:‘Ironbased braze filler metal for high-temperature applications’, United States Patent 7392930.
35.
SokolowskiP. K., MurphyT. F. and LindsleyB. A.:‘Considerations in sinter-brazing PM components:’2010 Powder Metal World Congress & Exhibition, Hollywood, Florida27-30June 2010, 2010, Metal Powder Industries Federation (MPIF), Edited in CD, ISBN: 978-970-9819496-9819494-9819492.
