Hot forging of Ti–6Al–4V alloy preforms produced by spark plasma sintering of powders

Powder preform forging is a technology that comprises the preparation of near net shape preforms through powder metallurgy and a subsequent hot forging in order to obtain the desired final shape. In this work, two Ti–6Al–4V powder preforms were sintered through spark plasma sintering (SPS) and then hot compressed in a horizontal dilatometer. Varying the temperature of the process, two full density preforms having different microstructures were produced: sintering at 950°C, a plate-like α was obtained, whereas sintering at 1050°C, an acicular α was obtained. The behaviour of the preforms under hot forging has been studied through hot compression tests carried out in a quenching and deformation dilatometer in a range of temperature and strain rates typically used in hot forging this alloy (850–1050°C, 0·01–1 s⁻¹). Hot workability has been evaluated by measuring the stresses required for deformation and by analysing both the stress–strain curves recorded during testing and the microstructures after deformation. The main microstructural phenomena occurring during hot compression were individuated. The best conditions for the hot forging operation of SPS preform are temperatures above β transus, where the materials are deformed in a regime of dynamic recrystallisation, at every strain rate.