Modelling of residual stresses and property distributions in friction stir welds of aluminium alloy 6061-T6

Abstract

An integrated thermal–metallurgical–mechanical model is used to analyse and provide insights into the formation of the residual stress and the changes in microstructure and property of Al6061-T6 friction stir welds. The simulations were conducted by means of a three-dimensional finite element model that accounts for the phenomena of frictional heating, weld microstructure and strength changes due to dissolution and reprecipitation of the hardening precipitate particles, and the mechanical workpiece/tool contact during the friction stir welding (FSW) process. The model predictions were confirmed by experimental measurement data from previous studies. For the friction stir welds investigated, it was found that the residual stress distribution is strongly dependent on the welding process parameters and the degree of material softening caused by welding. The recovery of material strength from natural aging does not increase the residual stress in the weld. The failure of friction stir weld under tensile load is controlled by the combination of the reduction in strength and the residual stresses in the heat affected zone (HAZ).

Keywords

FRICTION STIR WELDING THERMAL-MECHANICAL-METALLURGICAL MODELING FINITE ELEMENT METHOD ALUMINUM ALLOY 6061 RESIDUAL STRESS HAZ SOFTENING

Get full access to this article

View all access options for this article.

References

Thomas

W. M.

, Nicholas

E. D.

, Needham

J. C.

, Murch

M. G.

, Templesmith

and Dawes

C. J.

: International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978·8, 1991, and US Patent No. 5460317, 1995, USA.

Dawes

C. J.

and Thomas

W. M.

: Weld. J., 1996, 75, (3), 41–45.

Kallee

and Nicholas

: SAE Tech. Pap. Ser., 1998, No. 982362.

Colligan

K. J.

, Konkol

P. J.

, Fisher

J. J.

and Pichens

J. R.

: Weld. J., 2003, 82, (3), 34–40.

Gould

J. E.

, Linnert

T. J.

and Feng

: SAE Tech. Pap. Ser., 1998, No. 981875.

Sato

Y. S.

and Kokawa

: Metall. Mater. Trans. A, 2001, 32A, (12), 3023–3031.

Masubuchi

: ‘Analysis of welded structures’; 1980, New York, Pergamon.

John

, Jata

K. V.

and Sadananda

: Int. J. Fatigue, 2003, 25, 939–948.

Bussu

and Irving

P. E.

: Int. J. Fatigue, 2003, 25, 77–88.

10.

James

, Mahoney

M. W.

and Waldron

: Proc.1st Int. Symp. on ‘Friction stir welding’, Paper No. 6–1 “Residual stress measurements in friction stir welded aluminum alloys”, Thousand Oaks, CA, USA, June 1999, TWI Ltd.

11.

Wang

X.-L.

, Feng

, David

S. A.

, Spooner

and Hubbard

C. R.

: ‘Neutron diffraction study of residual stresses in friction stir welds’, Proc. 6th Int. Conf. on ‘Residual stresses’, IoM Communications, London, UK, July 2002, 2, 1408–1414.

12.

Dalle

C. D.

, Lima

, Wegener

, Pyzalla

and Buslaps

: Proc. 3rd Int. Symp on ‘Friction stir welding’, ‘‘Investigations on residual stresses in friction stir welds’’. Kobe, Japan, September 2001, TWI Ltd.

13.

Sutton

M. A.

, Reynolds

A. P.

, Wang

D.–Q.

and Hubbard

C. R.

: J. Eng. Mater. Technol., 2002, 124, 215–221.

14.

Reynolds

A. P.

, Tang

, Gnaupel-Herold

and Prask

: Scr. Mater., 2003, 48, 1289–1294.

15.

Peel

, Steuwer

, Preuss

and Withers

P. J.

: Acta Mater., 2003, 51, 4791–4801.

16.

Woo

, Choo

, Brown

D. W.

, Feng

and Liaw

P. K.

: Mater. Sci. Eng. A, 2006, A437, 64–69.

17.

Chao

Y. J.

and Qi

: J. Mater. Process. Manuf. Sci., 1998, 7, (2), 215–233.

18.

Soundararajan

, Zekovic

and Kovacevic

: Int. J. Mach. Tools Manuf., 2005, 45, 1577–1587.

19.

Ditzel

P. J.

: ‘Microstructure/property relationships in aluminum friction stir welds’, MSc thesis, The Ohio State University, Columbus, OH, USA, 1997.

20.

Lienert

T. J.

and Gould

J. E.

: Microstructures in friction stir welds on A1 6061–T651 alloy, Unpublished Research, Edison Welding Institute, Columbus, OH, USA, 1998.

21.

Wang

X.-L.

, Feng

, David

S. A.

, Spooner

and Hubbard

C. R.

: Proc. 6th Int. Conf. on ‘Residual stresses’, London, UK, July 2000, IOM Communications, 1408–1414.

22.

Inc

HKS

.: ‘ABAQUS/standard user's theory manual’, Version 5.8; 1999, Pawtucket, RI, Hibbit, Karlsson & Sorensen Inc.

23.

Touloukian

Y. S.

: ‘Thermophysical properties of high temperature solid materials’, Vol. 2; 1967, New York, MacMillan.

24.

Masubuchi

: ‘Analysis of welded structures’, 160; 1980, New York, Pergamon.

25.

Feng

, Gould

J. E.

and Lienert

T. J.

: ‘Hot deformation of aluminum alloys II’, (ed. T. R. Bieler et al.), 149–158; 1998, Warrendale, PA, TMS.

26.

Frigaad

, Grong

and Midling

O. T.

: Proc. 7th Int. Conf. on ‘Joints in aluminum’ (INALCO ’98), Cambridge, UK, April 1998, TWI Ltd, page no. 208–218.

27.

McClure

J. C.

, Feng

, Tang

, Gould

J. E.

, Murr

L. E.

and Gao

: ‘Trends in welding research’, (ed. S. A. David et al.), 590595; 1998, Metals Park, OH, ASM International.

28.

Schmidt

, Hattel

and Wert

: Modell. Simul. Mater. Sci. Eng., 2004, 12, 143–157.

29.

Feng

and Santella

M. L.

: ‘‘Friction stir welding and processing of advanced materials’’, Unpublished research, Oak Ridge National Laboratory, Oak Ridge, TN, USA, 2003.

30.

Lienert

T. J.

, Stellwag

W. L.

and Lehman

L. R.

: Proc. 4th Int. Symp. on ‘Friction stir welding’, Park City, UT, USA, May 2003, TWI Ltd, Paper No. S03A–P1.

31.

Myhr

O. R.

and Grong

: Acta Metall. Mater., 1991, 39, (11), 2693–2708.

32.

Myhr

O. R.

, Grong

, Fjae

H. G.

and Marioara

C. D.

: Acta Mater., 2004, 52, 4997–5008.

33.

Cahoon

J. R.

, Broughton

W. H.

and Kutzak

A. R.

: Metall. Trans., 1971, 2, (7), 1979–1983.

34.

ASM International : in ‘Metals handbook’, Vol. 2, available at: http://www.asminternational.org/hbk

35.

Feng

, Babu

S. S.

, Riemer

B. W.

, Santella

M. L.

, Gould

J. E.

and Kimchi

: Weld. World, 2001, 45, (11–12), 18–24.