The aim of this study is to design an artificial skin dress. A multilayer skin dressing included synthesised castor oil based polyurethane (PU) as the outer layer and two biopolymeric layers of heparin and chitosan as the inner layers were prepared. The surface of PU film was activated using two steps oxygen radio frequency plasma treatment. The surface of the modified PU films characterised by attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy and water drop contact angle measurements. Scanning electron microscopy observations confirmed the presence of grafted poly acrylic acid on the surface of PU films. Also, heparin and chitosan were immobilised on PU films. In vitro cell culture showed that the samples have an excellent biocompatibility with L929 fibroblast cells. Cell adhesion and proliferation of cells on the chitosan/heparin immobilised surfaces showed better behaviours compared with poly (acrylic acid) grafted PU film.
MacNeilS: ‘Progress and opportunities for tissue-engineered skin’, Nature, 2007, 445, (7130), 874–880.
2.
GroeberF, HoleiterM, HampelM, HindererS, Schenke-LaylandK: ‘Skin tissue engineering – in vivo and in vitro applications’, Adv. Drug Deliv. Rev., 2011, 63, (4–5), 352–366.
WeibelD, VilaniC, HabertA, AcheteC: ‘Surface modification of polyurethane membranes using acrylic acid vapour plasma and its effects on the pervaporation processes’, J. Membr. Sci., 2007, 293, (1–2), 124–132.
BaberTM, VuDT, LiraCT: ‘Liquid-liquid equilibrium of the castor oil+soybean oil+hexane ternary system’, J. Chem. Eng. Data, 2002, 47, (6), 1502–1505.
12.
JinY, LingPX, HeYL, ZhangTM: ‘Effects of chitosan and heparin on early extension of burns’, Burns, 2007, 33, (8), 1027–1031.
13.
KweonDK, SongSB, ParkYY: ‘Preparation of water-soluble chitosan/heparin complex and its application as wound healing accelerator’, Biomaterials, 2003, 24, (9), 1595–1601.
14.
ChanCM, KoTM, HiraokaH: ‘Polymer surface modification by plasmas and photons’, Surf. Sci. Rep., 1996, 24, (1–2), 1–54.
15.
SalatiA, KeshvariH, KordestaniS, TaranejooS: ‘Design and fabrication of artificial skin: chitosan and gelatin immobilization on silicone by poly acrylic acid graft using a plasma surface modification method’, Journal of Macromolecular Science, part B: Physics, 2011, 50, (10), 1972–1982.
16.
HosseiniS, ShokriB, FirouzjahMA, KooshkiS, SharifianM: ‘Investigation of the properties of diamond-like carbon thin films deposited by single and dual-mode plasma enhanced chemical vapor deposition’, Thin Solid Films, 2011, 519, 3090–3094.
17.
KarkhanehA, MirzadehH, GhaffariyehA: ‘Simultaneous graft copolymerization of 2 hydroxyethyl methacrylate and acrylic acid onto polydimethylsiloxane surfaces using a two step plasma treatment’, J. Appl. Polym. Sci., 2007, 105, (4), 2208–2217.
ZhuA, ZhangM, WuJ, ShenJ: ‘Covalent immobilization of chitosan/heparin complex with a photosensitive hetero-bifunctional crosslinking reagent on PLA surface’, Biomaterials, 2002, 23, (23), 4657–4665.
20.
WilsonD, RhodesN, WilliamsR: ‘Surface modification of a segmented polyetherurethane using a low-powered gas plasma and its influence on the activation of the coagulation system’, Biomaterials, 2003, 24, (28), 5069–5081.
21.
WeibelD, VilaniC, HabertA, AcheteC: ‘Surface modification of polyurethane membranes using RF-plasma treatment with polymerizable and non-polymerizable gases’, Surf. Coat. Technol., 2006, 201, (7), 4190–4194.
TerlingenJGA, FeijenJ, HoffmanAS: ‘Immobilization of surface active compounds on polymer supports using glow discharge processes 1. Sodium dodecyl sulfate on poly (propylene)’, J. Colloid Interf. Sci., 1993, 155, (1), 55–65.
24.
LinYH, MiFL, ChenCT, ChangWC, PengSF, LiangHF, SungHW: ‘Preparation and characterization of nanoparticles shelled with chitosan for oral insulin delivery’, Biomacromolecules, 2007, 8, (1), 146–152.
25.
GumusdereliogluM, AdayS: ‘Heparin-functionalized chitosan scaffolds for bone tissue engineering’, Carbohydr. Res., 2011, 346, (5), 606–613.
